PDA

View Full Version : EP3 + k24/20 + BC Header = issue



rsamd
08-17-2008, 09:40 AM
Howdy guys. I just finished my k24/20 build /w pistons, rods bla bla...
Now i tryed to fit the CTR 4-2-1 buddyclub header but i cant get it on. The end of the header already bangs against the bottom. I have a EDM ep3 Civic Type R
btw. Are there any headers available that fit a k24/20 EP3 plz?

wishbear
08-17-2008, 10:33 AM
you would need the em2 front sway bar which is 19mm

talonXracer
08-17-2008, 11:10 AM
Most K24 swaps here stateside have used the DCrh with the EM2 front sway and a set of polyurethane engine mounts.

Most be the BCrh has a different profile than the DCrh.

You can have a header made, Hytech, SSR, Burns(kit, you weld) will be more than happy to make a K24/EP3 header for you.

lldiesel386ll
08-17-2008, 11:40 AM
you would need the em2 front sway bar which is 19mm

em2 is 15.9--using that should clear the header with your block...it does on mine :thumbu:

rsamd
08-18-2008, 01:49 PM
Thx for the quick reply guy's. Yes the DCrh would work because of the flex pipe
i guess. I'll ditch the bc and fit the stock header/dp for now which fits nice.

ALL MotoR Ep3
08-18-2008, 02:16 PM
mine BC headers fit perfectly....im suprised yours doesnt

rsamd
08-20-2008, 02:07 PM
mine BC headers fit perfectly....im suprised yours doesnt
Really? On an k24/20? hmm bothers me. The one i got is from an European Civic Type-R EP3 k20a2. Mabe u have one from an rsx-s that fits better dunno.

ALL MotoR Ep3
08-31-2008, 01:39 PM
Really? On an k24/20? hmm bothers me. The one i got is from an European Civic Type-R EP3 k20a2. Mabe u have one from an rsx-s that fits better dunno.

Yeah I think...i have the DC5/Ep3 One