Infinite Baffle Subs/DVD dac repair

[Kanzen Taichou]

Hi, I'm pretty new to ICE.
>I was thinking about custom mounting an IB Sub into the hatch deck; the board that is attached by the strings. But instead I'm going to replace that board with the wood they use for enclosures.
--How would that play out?
--Good, bad, problems?
>Also my DVD dac's screen won't pop out anymore. I uninstalled it and brought it inside and noticed that the screen just slides in and out freely, plus I have a disc stuck in there. It's a Audiovox something-er-other; dunno the actual model # of hand.
--Is there anything I can to do repair it?
--Where could I go to get it repair?

[Standard Issue]

I've tried that. MDF is too heavy for that application. Just get a sub box and take it out when you need the space.

[Kanzen Taichou]

I've tried that. MDF is too heavy for that application. Just get a sub box and take it out when you need the space.

What if i tried to make a fiberglass deck to house the sub?

[Chad]

Someone did an IB setup in a VW hatchback, it had 2X15's. One thing about IB is to make sure the rear of the drivers are sealed fromt he front radiating surface, this can be a real bear in our cars since the seat is relatively acoustically transparent to low frequencies. Modifications would be great for questionable results. I have sincerely considered it many times ut just could not get an idea of how to get it to work sans venting the rear of the driver outside the car.

[Kanzen Taichou]

I'll post up a draxwing of what i as thinking about doing.
what about dvd head unit repairs?