PDA

View Full Version : rsx-s shocks



upinsmokep
08-26-2008, 03:21 AM
i have EP s-tech springs on my 2004 right now
could i just swap out my stock shocks for 2004 rsx-s ones??

thx

upinsmokep
08-26-2008, 04:00 AM
i realize i need rsx-s tie rods as well

talonXracer
08-26-2008, 06:08 AM
They will bolt in the front, the rear struts are too wide at the bottom mount and need to be ground down to fit the EP3 chassis.

upinsmokep
08-26-2008, 01:42 PM
yea, i'll have to grind the rear ones.....

but could i use my tein EP specific springs with the rsx-s shocks??

jw1
08-26-2008, 10:34 PM
The shock damping probably won't be much better than your stockers if that is what your concern is. I'd go with aftermarket shocks for any lowering springs. Unless your current shocks are blown, which, in that case, just use the RSX-S if you already have them, otherwise, go aftermarket.