2008 si cams

[firmk20]

What would u pay for a set of 2008 si cams with 5k on them?

[MugenReplica]

300

Wow, really well thought out answer.:mrolleyes:

If you actually want to respond and help the guy out, at least give him an idea of a high or low price, where you found them for 300 (is that US dollars, Canadian, pesos, rubles, pounds, etc.). Otherwise I'm gonna take this as postwhoring and not being helpful to fellow members at all.:mrolleyes:

[firmk20]

from the us, and is 300 a good price?

[Stanz0r]

from the us, and is 300 a good price?

Less than half of what you'd pay new from Majestic Honda (http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=CIVIC&catcgry2=2008&catcgry3=2DR+SI&catcgry4=KA6MT&catcgry5=CAMSHAFT-CAM+CHAIN+%282.0L%29)

A set of aftermarket stage 1 or 2 cams will run you close to 300. I'm not up to date on how much FG cams run in the classifieds, but that should give you a starting point on the high price at least.

[MugenReplica]

from the us, and is 300 a good price?

What Stanz0r said, plus I'd cruise some other websites to attempt to find them used. Don't buy any Skunk2 products. I'd buy Blueprint cams. They are better and should be cheaper:mbiggrin:.

[shadowmd]

i have'em and really like'em :mangel:

[shadowmd]

300 is ok, but i would offer 200 and thats because since u already have the stock a2 cams. the only difference between the z3 cams and the a2 cams is the intake cam. the exhaust cams are the same. i got mine with ZERO miles on them from doug aka talonxracer for $150. but he hooked me up. he had them just laying around

[firmk20]

300 is ok, but i would offer 200 and thats because since u already have the stock a2 cams. the only difference between the z3 cams and the a2 cams is the intake cam. the exhaust cams are the same. i got mine with ZERO miles on them from doug aka talonxracer for $150. but he hooked me up. he had them just laying around

i thought 300 was a little high, yo we definately got to hook up a minnie meet before the next md meet. I hope we can make that happen before the winter kicks into gear.

[firmk20]

What Stanz0r said, plus I'd cruise some other websites to attempt to find them used. Don't buy any Skunk2 products. I'd buy Blueprint cams. They are better and should be cheaper:mbiggrin:.

thanks for the help:thumbu:

[cleanep3]

would the z3 cams fit into my stock a3 engine??

[SinisterCivicSi]

thread from 2008.


closed.