PDA

View Full Version : offset question



quest4boost169
09-02-2008, 05:30 PM
what is the min offset and the max offset that will fit on the 04/05s?

mustclime
09-03-2008, 12:47 PM
what is the min offset and the max offset that will fit on the 04/05s?

what size tires? what drop? how much neg camber?.......more info needed:mfrown:

quest4boost169
09-03-2008, 02:02 PM
what size tires? what drop? how much neg camber?.......more info needed:mfrown:

not sure on all that yet.... im hopefully getting the tein springs and the rear camber bars... for now... dont got a lot of extra cash to drop into at the momemt! i will have to find all the alignment angles and rims/tire size out once i get the springs!

the reason i was asking.... was because i kinda wanted to see what other honda factory rims would look good on the ep... but wasnt sure which ones would fit seeing as they all have different offsets i believe?

MugsyTheGr8
09-03-2008, 02:09 PM
check the fitment thread. if im not mistaken the 02-03 and the 04-05 have the same clearances.

skoolnu
09-03-2008, 04:14 PM
+43 or +45 offset is what i go with. Im running 18x8 +45 offset, my car is dumped pretty good. never rubbed once.

jofus228
09-05-2008, 02:10 AM
I know we can do +35 without having to get too much negative camber and the wheels should be flush with the fenders.

yipyipyip
09-05-2008, 02:59 PM
what about Wheels are
Front - 15x7 +38
Rear - 15x8 +15

Tires:
195/50R15 Hankook K106

theyre coming off of a 1st gen scion xb
i doubt i could pull it off but theyre so cheap

shllipperybert
09-05-2008, 03:14 PM
supreme has 16x8 with +0 offset i believe if there is a will there is a way

http://www.ephatch.com/forum/showthread.php?t=47290&page=2