PDA

View Full Version : Tomorrow i change my tranny fluid.. quick question



McNastee
09-04-2008, 08:33 PM
using this guide http://www.ephatch.com/forum/showthread.php?t=43201 It says if you have a v2 intake (which i do) you can put it in from up top.. my question is where? I havent done much work to this car and am a little confused as to what im looking for. Any help/pictures with markers would be much appreciated

27rocks
09-04-2008, 08:36 PM
there is a bolt right above the drain bolt. i think its 17mm... I put the car on a flat surface and use a long tube with a funnel at the end of it. I stick the tube in the whole where the bolt is and fill it up till it spills out.

4angrybadgers
09-05-2008, 05:04 AM
Do not fill from the top through the VSS sensor hole. You'll put in too much fluid and that can cause issues.

Fill the tranny through the 17mm fill bolt hole like the walkthrough and the owner's manual say.

oogy-boogy
09-05-2008, 05:17 AM
Moved..............

shanewdude
09-05-2008, 05:17 PM
Here's a link to a video:
http://importtuningtv.powertvonline.com/video/1095

BlkDeathSi
09-05-2008, 08:36 PM
Make sure you get the fill bolt out BEFORE you take out the drain bolt . . . a few posted before the crash that they couldn't get the fill bolt out after they had drained the tranny and needed to know what to do.

Have fun.