5 lug conversion off rsx?

[moso]

hey guys i wanted to do a 5lug conversion on my 03 si and i was wondaring if i can use parts off the rsx/rsx type s

if yes does anyone have a list of what exactly i might need?

[moso]

can someone please help?:mfrown:

[talonXracer]

You can use the hubs and rotors from a base RSX or 04'-05' EP3.

If you use typeS hubs you will need typeS axles as well.

[lordhelmet]

I'll buy your rear 4 lugs off of you!

[moso]

why wats so diffrent about the the axles?

[frankdogg]

the splines.

[moso]

is the base rsx front brake system any different from the type s though?

[mustclime]

is the base rsx front brake system any different from the type s though?

type-s = 11.7 inch ft rotors and the base and ep3 is 10.3 inch ft rotors.

[FoReVaPmP]

Use the hub/axles/breaks/calipers and you should be all set. Your stock LCAs' will work,but I'd invest in buying SS lines.

[moso]

ya but the thing is i dont want to change the axles im hoping to just change the hubs rotors and brakes

[talonXracer]

ya but the thing is i dont want to change the axles im hoping to just change the hubs rotors and brakes

You can use the typeS brake rotors and calipers, you only need to use either the base rsx or later EP3 hubs. They are 5 lug but have the splines for the smaller EP3 axles.