MugenReplica
03-19-2010, 09:50 PM
I figure it's about time that I started the story of the evolution of my Ep3 from 2004 until now. She has gone through more than a few stages and differences, with one more to come.I like to consider her the Ep3 that Ephatch built as almost all of my parts were purchased through the Classifieds section here.
As I picked her up the day I purchased her in Sept. 2004. Stock as they come.
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/02civ01.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/02civ04.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/02civ05.jpg
With limited funds, I managed to purchase my first few modifications to it. A SSM Wings West rear and side skirts(purchased form DavidT), along with a USDM carbon fiber mugen replica front lip and USDM carbon fiber mugen replica wing(purchased from Showstopers) rounded out the exterior. A set of Neuspeed Race springs and HKS SRI(purchased from Blackapino) finalized the rest.
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/johnspics080.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/johnspics063.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/johnspics065.jpg
By the beginning of the following year, I sold off the Wings West body kit, swapped out the blown struts and Neuspeed Race springs for a Ep3 specific Mugen SS suspension kit (purchased from Nossy), installed a DC5 DCRH(from fsugatorbait), installed a SSM fiberlass mugen replica grill, and swapped over to a 3" exhaust with a Vibrant muffler(purchased from J D M). A little later in the spring, I swapped out my stockies for a set of Konig Rated R 16x7 rims(purchased from JoneSi) and also used a set as 17x7 Tenzo Sinkos for autox.
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/77663565-S.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/241064417_6d2b017457.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/240416318_30c7fc2119.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/mugen.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/l_fb49085423e5711c6934a1fac4aaf96e.jpg
The next evolution saw me selling the Konig Rate R rims to purchase a set of 15x7 Volk TE37's that Oogy Boogy parted out. Along with the rims I purchased his custom center console and a Nextgear IMG(Mel, you still haven't shipped that to me:mredface:). To help in the handling department, I added a 21mm rear sway and a fiberglass Bride Zeta II shell on Nagisa rail(which was reupholstered) to keep me secure. I also scored a mugen replica cf hood and 04-05 mugen replica carbon fiber grill from two other members on here.
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/TheGlenn048.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/TheGlenn045.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/100_0547.jpg
Finally it brings us to the current stage of the vehicle. I added a pair of CTR replica side skirts, an HFP rear lip and a SSM USDM fiberglass front lip (I broke 3 of the USDM carbon fiber mugen replica front lips. DON'T BUY THEM). I also along the way I managed to pick up a pair of retrofitted TSX 5000k HID projector headlights. Along with all that, I finally added a little performance to the package. 2004EP3HATCH and myself installed a Z1 head and RSX JRSC with a 3.4" pulley. To help out with the JRSC, a OBX 2nd Gen header, another mandrel bent 3" borla exhaust, a DC5 CAI with HKS filter, and finally good ol' Kpro.
http://img.photobucket.com/albums/v211/EP3SINY/009.jpg
http://img.photobucket.com/albums/v211/EP3SINY/IMG_3325.jpg
http://img.photobucket.com/albums/v211/EP3SINY/ry3D400.jpg
http://img.photobucket.com/albums/v211/EP3SINY/IMG_3326.jpg
The next stage will be updated shortly as parts are installed. But I'm planning massive changes to the current setup and it's going to be something a tad different. I hope you enjoyed the evolution of my Ep3.
*Please forgive any bad grammar/spelling. I'm exhausted/intoxicated and just wanted to add a members ride thread finally.
As I picked her up the day I purchased her in Sept. 2004. Stock as they come.
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/02civ01.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/02civ04.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/02civ05.jpg
With limited funds, I managed to purchase my first few modifications to it. A SSM Wings West rear and side skirts(purchased form DavidT), along with a USDM carbon fiber mugen replica front lip and USDM carbon fiber mugen replica wing(purchased from Showstopers) rounded out the exterior. A set of Neuspeed Race springs and HKS SRI(purchased from Blackapino) finalized the rest.
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/johnspics080.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/johnspics063.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/johnspics065.jpg
By the beginning of the following year, I sold off the Wings West body kit, swapped out the blown struts and Neuspeed Race springs for a Ep3 specific Mugen SS suspension kit (purchased from Nossy), installed a DC5 DCRH(from fsugatorbait), installed a SSM fiberlass mugen replica grill, and swapped over to a 3" exhaust with a Vibrant muffler(purchased from J D M). A little later in the spring, I swapped out my stockies for a set of Konig Rated R 16x7 rims(purchased from JoneSi) and also used a set as 17x7 Tenzo Sinkos for autox.
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/77663565-S.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/241064417_6d2b017457.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/240416318_30c7fc2119.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/mugen.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/l_fb49085423e5711c6934a1fac4aaf96e.jpg
The next evolution saw me selling the Konig Rate R rims to purchase a set of 15x7 Volk TE37's that Oogy Boogy parted out. Along with the rims I purchased his custom center console and a Nextgear IMG(Mel, you still haven't shipped that to me:mredface:). To help in the handling department, I added a 21mm rear sway and a fiberglass Bride Zeta II shell on Nagisa rail(which was reupholstered) to keep me secure. I also scored a mugen replica cf hood and 04-05 mugen replica carbon fiber grill from two other members on here.
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/TheGlenn048.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/TheGlenn045.jpg
http://img.photobucket.com/albums/v211/EP3SINY/My%20Ep3/100_0547.jpg
Finally it brings us to the current stage of the vehicle. I added a pair of CTR replica side skirts, an HFP rear lip and a SSM USDM fiberglass front lip (I broke 3 of the USDM carbon fiber mugen replica front lips. DON'T BUY THEM). I also along the way I managed to pick up a pair of retrofitted TSX 5000k HID projector headlights. Along with all that, I finally added a little performance to the package. 2004EP3HATCH and myself installed a Z1 head and RSX JRSC with a 3.4" pulley. To help out with the JRSC, a OBX 2nd Gen header, another mandrel bent 3" borla exhaust, a DC5 CAI with HKS filter, and finally good ol' Kpro.
http://img.photobucket.com/albums/v211/EP3SINY/009.jpg
http://img.photobucket.com/albums/v211/EP3SINY/IMG_3325.jpg
http://img.photobucket.com/albums/v211/EP3SINY/ry3D400.jpg
http://img.photobucket.com/albums/v211/EP3SINY/IMG_3326.jpg
The next stage will be updated shortly as parts are installed. But I'm planning massive changes to the current setup and it's going to be something a tad different. I hope you enjoyed the evolution of my Ep3.
*Please forgive any bad grammar/spelling. I'm exhausted/intoxicated and just wanted to add a members ride thread finally.