PDA

View Full Version : New Wheel/Tire Size thread



Pages : 1 [2] 3 4 5

bchaney
12-20-2010, 01:27 PM
16x8.5 +35 225/50 in front, 16x7.5 +35 205/55 in rear

Can it be done with OEM camber specs? (1.5" drop)

27rocks
12-21-2010, 11:57 AM
16x8.5 +35 225/50 in front, 16x7.5 +35 205/55 in rear

Can it be done with OEM camber specs? (1.5" drop)

Maybe since you are only dropped a little. I know the rear will be tight but wou will need at least -1.5 to clear a rolled fender. The front might also be ok but having camber available is always a good thing. Having the ability to correct it is always a good thing. You wont have to run any crazy camber but if you want it to fit properly and not rub i would invest in camber arms and plates or bolts for both front and rear.

* If anyone is dropped at all i highly suggest getting at least the rear camber arms* *If you are dropped low and want to run a slightly more agressive wheel you WILL need both front and rear camber adjustments*

ragebomb
12-22-2010, 02:23 PM
I'm thinking about a set of JDM RSX Type-R wheels.

17x7, offset +60

I know the diameter/width are ok, but the offset concerns me. Offset is +60. Will that even fit?

I have an 02 EP3 with a 5-lug conversion from an 03 RSX Type-S.

Edit: I think I just googled/found my own answer.
http://www.honda-tech.com/showthread.php?t=1033164

People say I'd need spacers for it to look right.

powdbyrice
12-22-2010, 09:09 PM
yes, you will need spacers. i'm not an advocate of spacers, but these wheels look hot.

ragebomb
12-22-2010, 09:38 PM
yes, you will need spacers. i'm not an advocate of spacers, but these wheels look hot.

Yep. Yeah I'm not a fan of spacers either. :) I think I'll go the cheap route and get jdm dc5 itr replicas instead. Those happen to be +42 offset instead.

k20pr
12-22-2010, 10:36 PM
...

27rocks
12-23-2010, 11:53 AM
Yep. Yeah I'm not a fan of spacers either. :) I think I'll go the cheap route and get jdm dc5 itr replicas instead. Those happen to be +42 offset instead.

There is nothig wrong with spacers as long as you buy decent ones. There are race teams out there that run spacers simply because they are only allowed a certain width wheel and sometimes it doesnt come in the offset they need to maximize the width of the fenders. With that said i would look into getting some and buying the real Honda wheels.

powdbyrice
12-24-2010, 12:38 AM
look at wayne from ssr's ep3 w/itr wheels. its hot.
or ocelaris' old ep
http://img.photobucket.com/albums/v511/Ocelaris/CTR_Stuff/ITR_Brembo_Install/ITR_Brembo_Install_26.jpg

ps: if you dont want to get spacers, i'd get rota torques in silver in 17x8 +35.

udontknowjack
12-31-2010, 10:06 PM
Man I want to try to jam a 245/45/16 front... I have like an inch drop max... With fender flares can I make that happened?

27rocks
01-01-2011, 12:00 AM
Man I want to try to jam a 245/45/16 front... I have like an inch drop max... With fender flares can I make that happened?

I'm running 245/40/17's on stock fenders....

SHG_EasyE
01-01-2011, 12:27 PM
There is nothig wrong with spacers as long as you buy decent ones. There are race teams out there that run spacers simply because they are only allowed a certain width wheel and sometimes it doesnt come in the offset they need to maximize the width of the fenders. With that said i would look into getting some and buying the real Honda wheels.


+1

We use spacers on most of our race cars for just that reason. Its suprising how much a 1" wider track can improve the stability of a car.

ShadowEP3
01-01-2011, 12:50 PM
http://www.youtube.com/watch?v=S-BGIcRBPHM&feature=player_embedded

chrispychicken
01-01-2011, 01:20 PM
Fucking hilarious! Hahaha "I don't care hella flush. Gets me all the bitches." fucking retard

04EP3Hatch
01-01-2011, 02:25 PM
i figure i'd post my setup: 17x8 +42 Wagen Wheels WW1 on 215 40 17 Nankang NS1's (great buy on tires by the way, great ride quality)

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1372.snc4/164398_174348909262569_100000623832794_432978_2370 47_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs027.snc6/165697_174348942595899_100000623832794_432979_6612 35_n.jpg

perfect width/offset selection IMO, no poke at all. just nice and flush fitment. and im not going any lower with the car, i have a 3" exhaust and that whit will be gone

iDom
01-01-2011, 02:49 PM
I want to get some 16x8 RPF1's and I have the a-spec suspension so it's not too low. Problem is i'm 4 lug and they're a bit harder to find, but I have found a few sets..

What's 'safe' as far as offset goes in order to keep a decently practical/mild camber setting? This car is also my DD, so there are possible issues.

I always get nervous trying to decide because of tire size, wheels size, width, ride height, offset, camber.. Shoot me

EDIT:
Oh yea, I prefer function over form.. But being as I will be going from my current stock wheels to new ones, I wanna try and get the best of both worlds, the looks and a nice upgrade in case I want to auto cross.

ShadowEP3
01-01-2011, 04:03 PM
i thought RPF1s only came in 16x8 +38 for four lugs?



i figure i'd post my setup: 17x8 +42 Wagen Wheels WW1 on 215 40 17 Nankang NS1's (great buy on tires by the way, great ride quality)


perfect width/offset selection IMO, no poke at all. just nice and flush fitment. and im not going any lower with the car, i have a 3" exhaust and that whit will be gone

sex..looks great

iDom
01-01-2011, 04:08 PM
i thought RPF1s only came in 16x8 +38 for four lugs?

You are probably correct, I honestly don't know. But, even so, Tire overall tire size and what not, I wonder how adjustable camber will be, I don't want anything crazy.

powdbyrice
01-01-2011, 04:38 PM
16x8 +38 rpf1s will be fine with the aspec suspension.

DrZfInEsT
01-04-2011, 07:54 PM
Diggin the new wheels 04ep3hatch

SIisaLowRydaEP3
01-07-2011, 10:28 AM
Current Set
Wheel size: 18" Kyowa Racing (18x7.5)
Tire size: 215/40/18 Yokohama S-Drive
Drop: 1.3" Front / 1.5" Rear (Tanabe GF210)
Fenders rolled: Front
Rubbing: Slight front rubbing (U-Turns, or hard turns on rough road)

Old Set
Wheel size: 18" Kyowa Racing (18x7.5)
Tire size: 215/35/18 Dunlop Direzza DZ101
Drop: 1.3" Front / 1.5" Rear (Tanabe GF210)
Fenders rolled: Front
Rubbing: No

Set 3
Wheel size: 18" Kyowa Racing (18x7.5)
Tire size: 215/35/18 Federal 595RS-R
Drop: 1.3" Front / 1.5" Rear (Tanabe GF210)
Fenders rolled: Front
Rubbing: No
what is the offset on your wheels??

SIisaLowRydaEP3
01-07-2011, 01:42 PM
would 18x8 with a 35mm offset fit on my car or will i need to roll fenders something? i have skunk 2 adjustable coils dropped 2"

ragebomb
01-16-2011, 07:25 AM
Here's my contribution.

Current setup:
Rim size: 16x7 +43
Tires: 205/50/16
Drop: Mugen SS
Fenders rolled: nope
verdict: no rubbing, ever.

http://i551.photobucket.com/albums/ii455/ragebomb99/ep3/th_022bd708.jpg (http://s551.photobucket.com/albums/ii455/ragebomb99/ep3/?action=view&current=022bd708.jpg)

Temp Setup:
Rim size: 16x6.5 +45
Tires: 205/55/16
Drop: Mugen SS
Fenders rolled: No
Rubbing: yes on corners with inclines, front only

27rocks
01-16-2011, 10:18 AM
CAN A MOD PLEASE STICKY THIS THREAD?????? It would sure clean up a lot of the new threads people start regarding wheel sizes and fitment.

tallblondkid
01-16-2011, 10:06 PM
i run 17x8 +38 evo 9 wheels all around with 235/40 and never rub but im not very low


just ordered 17x9 +38 (F) and 17x8 +35 (R) for racing... will post pics when i get them.

heyvortek
01-17-2011, 12:14 AM
http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs033.snc6/166381_474687937029_611287029_6119580_1452348_n.jp g

CCWs....17x8 +32 front and 17x8.5 +32 rear...runnin 205/45/17 bf gforces

ep3jd
01-17-2011, 06:54 AM
http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs033.snc6/166381_474687937029_611287029_6119580_1452348_n.jp g

CCWs....17x8 +32 front and 17x8.5 +32 rear...runnin 205/45/17 bf gforces


Your wheels are on backwards. Just letting you know :mwink:

heyvortek
01-17-2011, 03:33 PM
wait im not rwd?!?!? jp :)

ep3jd
01-17-2011, 04:23 PM
wait im not rwd?!?!? jp :)

I'm just messing with you. Not that I'll ever understand it, especially on a car with LESS clearance in the rear.. But I do understand fads.


By the way; all your car needs is a volvo lip, with a garage door lip under it, covered in stickers, and you'll probably get on hellaflush.com!!!! :mbiggrin:

heyvortek
01-17-2011, 04:41 PM
jdm airwalker combo on the way...may go lower in front thats all..getting on hellaflush would be nice. just want to spread some ep love thru the import community. :)

27rocks
01-17-2011, 05:23 PM
I'm just messing with you. Not that I'll ever understand it, especially on a car with LESS clearance in the rear.. But I do understand fads.


By the way; all your car needs is a volvo lip, with a garage door lip under it, covered in stickers, and you'll probably get on hellaflush.com!!!! :mbiggrin:

Hey hey now!!! The Volvo lip was an experiment. I never thought people would make it such a big deal lol.

ep3jd
01-17-2011, 06:18 PM
Hey hey now!!! The Volvo lip was an experiment. I never thought people would make it such a big deal lol.

Hahaha. I fully approve of that lip.





















Sticker-free, that is :mwink:

TronG
01-22-2011, 02:12 PM
Would 17x9 +35 fit on our cars? I really like the xxr 526.. And if it does what tire size should I go? 205/40? I have 002 16x8 0 offset right now.. What you guys think?

SHG_EasyE
01-22-2011, 02:38 PM
Volvo lip represent! I owe you big time Rob - Ill run this lip forever!

http://i159.photobucket.com/albums/t131/sohonda_garage/P1080783.jpg

02TWSI
01-22-2011, 02:51 PM
Damn. those eye lids and everything flow so good together. looks aggressive. mind pming me where you got the eye lids?

SHG_EasyE
01-22-2011, 02:55 PM
Thanks man, I made the eyelids myself

27rocks
01-22-2011, 04:09 PM
Would 17x9 +35 fit on our cars? I really like the xxr 526.. And if it does what tire size should I go? 205/40? I have 002 16x8 0 offset right now.. What you guys think?
LOL

Volvo lip represent! I owe you big time Rob - Ill run this lip forever!

http://i159.photobucket.com/albums/t131/sohonda_garage/P1080783.jpg

hahaha looking fresh Evan!! I'm going to run mine till it either falls off or i end up getting a JDM setup.

SHG_EasyE
01-22-2011, 04:11 PM
I thought you were selling the EP?

27rocks
01-22-2011, 04:20 PM
I thought you were selling the EP?

I'm still up in the air with the idea.

Kentoneseboi
01-22-2011, 06:35 PM
i wish the volvo lip would fit on to other lips like HFP =(

27rocks
01-22-2011, 07:56 PM
i wish the volvo lip would fit on to other lips like HFP =(

The HFP lip looks great by itself.

PatrickJamesYu
01-22-2011, 08:00 PM
i wish the volvo lip would fit on to other lips like HFP =(
Don't you think thats too much?
The hfp lip kinda flares out
I think the simplicity of the volvo lip will kill it

Kentoneseboi
01-23-2011, 02:47 AM
Don't you think thats too much?
The hfp lip kinda flares out
I think the simplicity of the volvo lip will kill it

hmm yeah...i guess...i juss felt so high when i went to stance nation next to this accord that was on the ground...

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs947.snc4/74028_1494535317510_1057860011_31103370_2773672_n. jpg

SHG_EasyE
01-23-2011, 01:16 PM
I'm still up in the air with the idea.

Keep it! Do you have payments on it?

27rocks
01-24-2011, 10:00 AM
Keep it! Do you have payments on it?

Nope shes all mine.

ShadowEP3
01-24-2011, 11:02 AM
Nope shes all mine.

you know you want to :gheyf:


hmm yeah...i guess...i juss felt so high when i went to stance nation next to this accord that was on the ground...


remove those lips and those bumpers are hideous and look awfully high :tehe:
if you wanna throw on a lip under the HFP use a stock CD5 lip (make sure its from a 95/96..IIRC 97 sedans changed up their stock lips due to bumper lights; not completely sure on coupes)

j.lai
01-24-2011, 07:30 PM
Hey, I'm looking to get some new wheels. I found a set of RE30's that are 16x7 + 33. This is the first time that I've bought wheels for my EP3 and I'm not sure what the fitment will be like. I'm also lowered on Tein S-Techs at the moment.

Also, are OEM 15x6+45??

88crx
01-24-2011, 10:59 PM
Hey, I'm looking to get some new wheels. I found a set of RE30's that are 16x7 + 33. This is the first time that I've bought wheels for my EP3 and I'm not sure what the fitment will be like. I'm also lowered on Tein S-Techs at the moment.

Also, are OEM 15x6+45??

16x7+33 would be tight. You might have to do a little roll in the rears depending on how much negative camber you have and what size tire you choose.

powdbyrice
01-25-2011, 12:32 AM
Hey, I'm looking to get some new wheels. I found a set of RE30's that are 16x7 + 33. This is the first time that I've bought wheels for my EP3 and I'm not sure what the fitment will be like. I'm also lowered on Tein S-Techs at the moment.


16+7 +33. fepster from socal.
http://i940.photobucket.com/albums/ad244/socalephatch/OC%20Krew%20PhotoShoot/4950714414_80a23788b6_b.jpg

usedep3
01-31-2011, 02:28 PM
anyone know if 17x8 +32 would fit fine? what size tire would be best

chiwhitesi
01-31-2011, 03:12 PM
anyone know if 17x8 +32 would fit fine? what size tire would be best

gaurdian runs
Enkei RPF1 17x8 +35
Toyo R888 235/40/17

ep3jd
01-31-2011, 03:38 PM
gaurdian runs
Enkei RPF1 17x8 +35
Toyo R888 235/40/17

Ran* he has 17x8.5 +40 now.
For 8 wide I think 225 would be good without looking bulgey.

usedep3
01-31-2011, 09:25 PM
gaurdian runs
Enkei RPF1 17x8 +35
Toyo R888 235/40/17


Ran* he has 17x8.5 +40 now.
For 8 wide I think 225 would be good without looking bulgey.

mind you, i'm only dropped on an hfp suspension. i was thinking about running 225/45/17 on 17x8 +32 wheels. would that work? any chance on rubbing?

ep3jd
01-31-2011, 09:29 PM
mind you, i'm only dropped on an hfp suspension. i was thinking about running 225/45/17 on 17x8 +32 wheels. would that work? any chance on rubbing?

With hfp suspension, I really doubt it. A fender roll wouldn't hurt though. But with 40 walls I could almost guarantee it wouldn't.

powdbyrice
02-01-2011, 12:12 AM
mind you, i'm only dropped on an hfp suspension. i was thinking about running 225/45/17 on 17x8 +32 wheels. would that work? any chance on rubbing?

235/40/17.

i was on 17x7.5 +45 on hfp w/ 235/40/17. no rubbing at all. hfp alignment specs.

usedep3
02-01-2011, 11:31 PM
235/40/17.

i was on 17x7.5 +45 on hfp w/ 235/40/17. no rubbing at all. hfp alignment specs.

you would run a 235/40/17 on a 17x8 +35 rim?

powdbyrice
02-02-2011, 09:57 PM
on HFP suspension? yes i would. that was going to be the specs on my next set until i sold the ep.

personally i hate the stretched look.

mmm beefy. my 17x7.5 +45 w/235/40/17 on hfp
http://i257.photobucket.com/albums/hh206/yellowsubmarine531/EP3/DSC07113Small.jpg

17x8 would be perfect imo.

usedep3
02-02-2011, 10:25 PM
on HFP suspension? yes i would. that was going to be the specs on my next set until i sold the ep.

personally i hate the stretched look.

mmm beefy. my 17x7.5 +45 w/235/40/17 on hfp
http://i257.photobucket.com/albums/hh206/yellowsubmarine531/EP3/DSC07113Small.jpg

17x8 would be perfect imo.

hmmm. thanks for the feedback. hopefully things work out and i can get these new wheels

Turtal
02-03-2011, 04:32 PM
Sup peeps I have some Work XD9 17 X 8.5 what tire size should I run with? I have my fenders rolled already on tein ss coils. Also the off set is +32 thanks.

27rocks
02-03-2011, 05:29 PM
235/40

02TWSI
02-03-2011, 06:17 PM
how many people are running around with 235s?

PatrickJamesYu
02-03-2011, 06:51 PM
we're running 255/45 on 17x9 rpf1's
on a project ap1 I'm working on

http://www.flickr.com/photos/40607669@N05/5392643404/
http://www.flickr.com/photos/40607669@N05/5392046865/in/photostream/

socmex7
02-03-2011, 07:56 PM
how many people are running around with 235s?

i can think of 3.. powdbyrice, SHG, Guardian If I remember correctly. and I think 27rocks has 245's. I'll on 225's so I almost qualify! :mangel:

27rocks
02-04-2011, 08:37 AM
Yup im on 245's. That was my goal when i first tinkered with the idea of running 9' wide wheels.

http://i58.photobucket.com/albums/g248/k20ep3/IMG_1975.jpg
For some reason the picture makes it look like its more cambered then it really is :shrug:

tallblondkid
02-04-2011, 09:41 AM
i am 17x8 +38 235/40 been like this for 2 years now... on hfp you will not rub, but you may need to roll the fenders
next set is 245/40

Turtal
02-05-2011, 10:16 AM
So 245 or 235? I have tein coils and fenders are rolled

ep3jd
02-05-2011, 01:26 PM
how low do you want the car to be lol it will fit it just depends on your drop, hfp is 1 inch, do you want to be much lower then that?

usedep3
02-08-2011, 04:24 PM
how low do you want the car to be lol it will fit it just depends on your drop, hfp is 1 inch, do you want to be much lower then that?

what size tire would you guys run on a 17x7 +45? i was thinking 225/45/17. will it work?

from the thread, it seems like the max anyone goes with a 17x7 +45 rim is a 215/45/17 tire.

Andrew
02-08-2011, 04:28 PM
what size tire would you guys run on a 17x7 +45? i was thinking 225/45/17. will it work?

from the thread, it seems like the max anyone goes with a 17x7 +45 rim is a 215/45/17 tire.

in my thread a lot of ppl said to run 225/45/17 to grip more and i'm sure they will run fine on a 7 width wheel. i've seen many people running that tire size perfectly fine in person so go for it. as long as youre not lowered too much you wont need a roll, but if you are lowered you might need slight camber and a roll. other than that that's it. keep us updated

maksym
02-08-2011, 05:23 PM
i am 17x8 +38 235/40 been like this for 2 years now... on hfp you will not rub, but you may need to roll the fenders
next set is 245/40

Can you post a picture how yours look?
Are you droped no more than an inch?

27rocks
02-09-2011, 09:20 AM
what size tire would you guys run on a 17x7 +45? i was thinking 225/45/17. will it work?

from the thread, it seems like the max anyone goes with a 17x7 +45 rim is a 215/45/17 tire.

Go with the 225's. They will fit just fine ont he 7's. I rocked them on 7.5's and thats not much wider without any issues.

Heitzke
02-09-2011, 09:37 AM
Yes, the 225's will be fine. I ran a set of 225/50's and now a set of 225/45's on my 16x7's

cloumep3
02-15-2011, 10:24 AM
i am 17x8 +38 235/40 been like this for 2 years now... on hfp you will not rub, but you may need to roll the fenders
next set is 245/40

Are your wheels same sizes all the way around? If so, are you using spacers?
I'm about to put my reverse stacked set, 17x7(R) & 17x8(F) with 225/45/17's tires, +35 offset. I have koni/GC set up so I can play with the height, but just wanted to know if the set up needed the spacers or not... Thanks!

27rocks
02-15-2011, 01:07 PM
Are your wheels same sizes all the way around? If so, are you using spacers?
I'm about to put my reverse stacked set, 17x7(R) & 17x8(F) with 225/45/17's tires, +35 offset. I have koni/GC set up so I can play with the height, but just wanted to know if the set up needed the spacers or not... Thanks!

You should be good to go.

cloumep3
02-15-2011, 03:35 PM
You should be good to go.

Thank you sir!!!

the JigGa mAn
02-25-2011, 01:05 AM
just bought some 16x7 +40 rota circuit 8 with 205/45/16 Kumho AST all season, think ill run into any issues or will i need to roll the rears? id like to go 225/45/16 or 225/50/16 after these get bald, im sure ill need to roll at that point.

PatrickJamesYu
02-25-2011, 01:25 AM
just bought some 16x7 +40 rota circuit 8 with 205/45/16 Kumho AST all season, think ill run into any issues or will i need to roll the rears? id like to go 225/45/16 or 225/50/16 after these get bald, im sure ill need to roll at that point.

Depending on your suspension settings, I don't think you will
205/45/16 is a bit smaller than stock

the JigGa mAn
02-25-2011, 01:28 AM
Depending on your suspension settings, I don't think you will
205/45/16 is a bit smaller than stock

buddy club n+, about 1.5"-2" all around

ep3jd
02-25-2011, 06:32 AM
17x9.5 +30

I know it will fit, with actually 2mm more clarence on the inside as opposed to 17x9 +38 which I was told is the highest offset you can fit.

BUT what about adding 3-4 degrees of negative camber, will there be issues?

Gracias!!!! :mcool:


And I'd be stretching tires, because I like to stretch tires :)

SamuraiSi
02-25-2011, 07:51 AM
just bought some 16x7 +40 rota circuit 8 with 205/45/16 Kumho AST all season, think ill run into any issues or will i need to roll the rears? id like to go 225/45/16 or 225/50/16 after these get bald, im sure ill need to roll at that point.

i got the same wheels with 215/45/16 and no problems. i'm only dropped about 1.5" though, but i got plenty of gap so you should be good. not sure though when you do go to 225/45 or 225/50, you might need to roll if you're dropped 2"

cloumep3
02-25-2011, 08:47 AM
My previous set up was 16x7, +35 offset with 225/50/16 falkens. My car sits about 1.25" - 1.5" drop and I had little issue with rear fender rubbing. But if I have rear passengers, it'd occassionally rub when going over some imperfections on the road. Fronts are def. fine. With 2" drop and 225, you'll most def. rub.

ep3jd
02-25-2011, 12:49 PM
Man I posted my question in here and the rpf1 thread hoping the wide wheel gurus of ephatch would chime in, but so far just crickets :mcry:

Sent from my Galaxy S using Tapatalk

SHG_EasyE
02-25-2011, 01:40 PM
EP3jd - I was running 17x9 +35's a while back. I was pretty low, tucking tire ever so slightly. There was about 3/8" between the inside of the rim itself and the trailing arm, and the tire rubbed the gas line cover in the fenderwell aswell as the bumper-fender tab ever so slightly when I went over large irregularities in the road. I was running -3.6 camber at the time. I would say that wheel you want will probably not fit, and if you can get it to fit, it will look absurd.

I ran those 9's back when the only other guy doing it was 27 rocks, and it was more of an experiment than anything. I changed out the rears as soon as I could for something that actually fit. I regret those days :-/

http://farm3.static.flickr.com/2326/3543735419_d53b25dbd5_z.jpg?zz=1

ep3jd
02-25-2011, 02:04 PM
Well 17x9.5 +30 actually pokes 1mm less then my last set of wheels (16x8 +10) and I didn't run any negative camber. And if 17x9 +38 fits, this set up is 2mm farther away from the strut housing, according to the offset calculator. Now of course your tire choice effected the rubbing issues, I would be stretching a 215/40 (please don't flame me, totally not in the mood today).

I'm just wondering if adding negative camber will effect inner clearance.


This is all hypothetical, I just want to know for arguments sake and future reference

Sent from my Galaxy S using Tapatalk

ep3jd
02-25-2011, 02:08 PM
Also I want to add that Miah's set up is 17x9 +22 with 205/40 and currently no negative camber, and THAT set up extends 2mm farther then 17x9.5 +30. So it seems it would fit, I'm just still curious about the whole adding negative camber bit.

Sent from my Galaxy S using Tapatalk

SHG_EasyE
02-25-2011, 02:18 PM
Adding negative camber will only affect the clearance between the wheel/tire and the inner fender well/tank lines. Clearance to the trailing arm will not be affected.
Im sorry but anything less than a 235 on a 17x9 is bullshit. Especially when youre talking about all seasons like all the hella frush turds love so much. My Azenis were stretched at a 235. 205? eat shit.

ep3jd
02-25-2011, 02:20 PM
Lol easy there killer, different strokes for different folks.

Sent from my Galaxy S using Tapatalk

ep3jd
02-25-2011, 02:21 PM
But thank you for the information buddy.

Sent from my Galaxy S using Tapatalk

SHG_EasyE
02-25-2011, 02:38 PM
NP. Ive got no problem with individuality, but when people start doing things to their cars that are just plain unsafe and can possibly harm others on the road I tend to get a little sand in the fachina.

akqowns
03-04-2011, 12:34 AM
205/50/17

17x7.5
+35 offset

if i drop 1.5 inches all around, would it rub?

if it would rub. what inch drop( I want at least 1.0~1.3) and what camber set would be the best for those wheels/tires without any problem?

i'm so noob on this.. :( i'm going to change my suspension setup next monday, and get alignment as well.. so i need these info ..

i would be grateful for any help !

ep3jd
03-04-2011, 06:37 AM
Get 205/45-17

_________________________________
POOPTOOTH loves Tapatalk :tehe:

powdbyrice
03-08-2011, 11:54 PM
how is this thread not stickied? it would save so much angst.

Hasbro
03-09-2011, 12:03 AM
Srysly

PatrickJamesYu
03-09-2011, 01:49 AM
Also I want to add that Miah's set up is 17x9 +22 with 205/40 and currently no negative camber, and THAT set up extends 2mm farther then 17x9.5 +30. So it seems it would fit, I'm just still curious about the whole adding negative camber bit.

Sent from my Galaxy S using Tapatalk

Damn you're always up to date on miahs wheel spec
You're like TMZ

ep3jd
03-09-2011, 05:55 AM
Because no one else really has stanced ep3s. I know almost all the nice stance set ups here.

You run 205/45 on 16x8 +0, right? :mwink:

rps.13
03-09-2011, 06:07 AM
Wheel size: 16x8 +38
Tire size: 205/55/16
Drop: no (in the process of fitting BC BR coilovers) refer to last pic
Fenders rolled: No, not yet
Rubbing: No
Rays Gram Lights 57s

http://i613.photobucket.com/albums/tt212/KAIZENRPS_13/IMG_6564-2.jpg?t=1299673811

http://i613.photobucket.com/albums/tt212/KAIZENRPS_13/IMG_6571-2.jpg?t=1299673814

only pic I have of the front end drop... forgot to measure it 1.00"-1.25"?

http://i613.photobucket.com/albums/tt212/KAIZENRPS_13/DSC00712.jpg?t=1299673476

I have three other sets of wheels, but all the pics I have are only test fit pics, BBS mesh 16's +24, Desmond Regamaster 17x9's +18, and OEM gtr r33 17x9's +30. I'll post them up when I have time...

Apologies I don't post on here much! Not too sure what I should/shouldn't put up?

.colin
03-09-2011, 09:32 AM
^^ nice setup, tough looking!

27rocks
03-09-2011, 09:36 AM
^^ nice setup, tough looking!

+1

Not a big fan of 16's but this one i really like.

nmysiismyn
03-09-2011, 09:56 AM
Wheel size: 16x8 +38
Tire size: 205/55/16
Drop: no (in the process of fitting BC BR coilovers) refer to last pic
Fenders rolled: No, not yet
Rubbing: No
Rays Gram Lights 57

http://i613.photobucket.com/albums/tt212/KAIZENRPS_13/IMG_6564-2.jpg?t=1299673811

http://i613.photobucket.com/albums/tt212/KAIZENRPS_13/IMG_6571-2.jpg?t=1299673814

only pic I have of the front end drop... forgot to measure it 1.00"-1.25"?

http://i613.photobucket.com/albums/tt212/KAIZENRPS_13/DSC00712.jpg?t=1299673476

I have three other sets of wheels, but all the pics I have are only test fit pics, BBS mesh 16's +24, Desmond Regamaster 17x9's +18, and OEM gtr r33 17x9's +30. I'll post them up when I have time...

Apologies I don't post on here much! Not too sure what I should/shouldn't put up?

Looks good bro! I didn't know they came in 16x8. I'd love to see more. Detailed shots maybe? :mangel:

I have rare replicas of your wheels called JBL TKO's on my SSM in 16x7 +37, wrapped in 205/50 tires, lowered on Skunk2 Lowering Springs and prototype Sportshocks (2.25"-2'5" dropp. It's a few posts back.

As for not posting much, I feel ya... but (if you have art least the slightest clue of what you're talking/asking about) for the sake of the forum, you gotta post away bro!

:ephatch:
___________________________________________
Sent from my HTC EVO 4G via Tapatalk Pro

nmysiismyn
03-09-2011, 11:03 AM
My bad. I guess the pics (mentioned above) aren't in this thread. I'll just whore them out here too. :mangel:

http://i830.photobucket.com/albums/zz228/Tommy_Castroreale/EPHatch/SDC12088copy1024w.jpg
http://i830.photobucket.com/albums/zz228/Tommy_Castroreale/EPHatch/SDC12059copy1024w.jpg
___________________________________________
Sent from my HTC EVO 4G via Tapatalk Pro

powdbyrice
03-09-2011, 01:47 PM
Wheel size: 16x8 +38
Tire size: 205/55/16
Drop: no (in the process of fitting BC BR coilovers) refer to last pic
Fenders rolled: No, not yet
Rubbing: No
Rays Gram Lights 57

[IMG]http://i613.photobucket.com/albums/tt212/KAIZENRPS_13/IMG_6564-2.jpg?t=1299673811[IMG]

[IMG]http://i613.photobucket.com/albums/tt212/KAIZENRPS_13/IMG_6571-2.jpg?t=1299673814[IMG]

only pic I have of the front end drop... forgot to measure it 1.00"-1.25"?

[IMG]http://i613.photobucket.com/albums/tt212/KAIZENRPS_13/DSC00712.jpg?t=1299673476[IMG]

I have three other sets of wheels, but all the pics I have are only test fit pics, BBS mesh 16's +24, Desmond Regamaster 17x9's +18, and OEM gtr r33 17x9's +30. I'll post them up when I have time...

Apologies I don't post on here much! Not too sure what I should/shouldn't put up?

post all the pix!

PatrickJamesYu
03-09-2011, 01:58 PM
Because no one else really has stanced ep3s. I know almost all the nice stance set ups here.

You run 205/45 on 16x8 +0, right? :mwink:

creep
hahaha

ep3jd
03-09-2011, 02:00 PM
Yup. I like your ride! What can I say? Lol

PatrickJamesYu
03-09-2011, 02:08 PM
well be sure to add the -40's on your arsenal of wheel fitments on ephatch

ep3jd
03-09-2011, 02:14 PM
I'm giving up on ephatch if that kid actually runs that stupid set up.

nmysiismyn
03-09-2011, 02:29 PM
well be sure to add the -40's on your arsenal of wheel fitments on ephatch


I'm giving up on ephatch if that kid actually runs that stupid set up.

BAHAHAHA!!! :pound:
___________________________________________
Sent from my HTC EVO 4G via Tapatalk Pro

omgheyitskenny
03-09-2011, 04:38 PM
Is it just me or is it really hard finding 225/45 tires in 17s? I have NeoGens right now but anybody else with 17s have different tires that are 225? Falken Zeix has a 225/40 and yokos have a 215/40 I have 17x7.5 all around and do not want to stretch. Maybe I shouldn't have went with 17s xD I waited almost 5 months for these rims and now tires are so limited

PatrickJamesYu
03-09-2011, 04:45 PM
Is it just me or is it really hard finding 225/45 tires in 17s? I have NeoGens right now but anybody else with 17s have different tires that are 225? Falken Zeix has a 225/40 and yokos have a 215/40 I have 17x7.5 all around and do not want to stretch. Maybe I shouldn't have went with 17s xD I waited almost 5 months for these rims and now tires are so limited

you just have to get them from a tire distributer who deals all the brands out there and not limited ones

http://www.onlinetires.com

powdbyrice
03-09-2011, 11:05 PM
Is it just me or is it really hard finding 225/45 tires in 17s? I have NeoGens right now but anybody else with 17s have different tires that are 225? Falken Zeix has a 225/40 and yokos have a 215/40 I have 17x7.5 all around and do not want to stretch. Maybe I shouldn't have went with 17s xD I waited almost 5 months for these rims and now tires are so limited

depending on your drop and offset, go 235/40/17. there are no good options in 225/40/17. i hate the stretched look as well. i liked how the 235s looked on 17x7.5.

rps.13
03-10-2011, 02:41 AM
cheers guys...

the only close up pics I took the other week:

http://i613.photobucket.com/albums/tt212/KAIZENRPS_13/IMG_6544.jpg?t=1299750035

http://i613.photobucket.com/albums/tt212/KAIZENRPS_13/IMG_6547.jpg?t=1299750028

http://i613.photobucket.com/albums/tt212/KAIZENRPS_13/IMG_6543.jpg?t=1299750047

I posted pics of the other wheels in here if u haven't seen them already... http://www.ephatch.com/forum/showthread.php?44276-Post-Picture-Of-Your-Current-Wheels&p=861058&posted=1#post861058

.colin
03-10-2011, 09:48 AM
Is it just me or is it really hard finding 225/45 tires in 17s? I have NeoGens right now but anybody else with 17s have different tires that are 225? Falken Zeix has a 225/40 and yokos have a 215/40 I have 17x7.5 all around and do not want to stretch. Maybe I shouldn't have went with 17s xD I waited almost 5 months for these rims and now tires are so limited

I have 225/45 Sumitomo HTRZ III on 17 x 7.5 - Heres a picture of my setup:

http://img840.imageshack.us/img840/2671/sn850196.jpg

Im a big fan of these tires. They grip well, are cheap, and they look sexy.

btw my drop is only 1.5" on Mugen SS

SHG_EasyE
03-10-2011, 11:24 AM
Looking good Col. Are you still trying to sell those wheels?

.colin
03-10-2011, 02:02 PM
Looking good Col. Are you still trying to sell those wheels?

Nah, I was able to save enough funds for my lady's engagement ring without selling them. Hanging onto them for now!

hondero69
03-10-2011, 02:10 PM
hi guys..any tires size suggestion for rota torque 17x8 +35, 4 lugs,tein suspension drop front 1.4" rear 1.3" ...235/40..???

omgheyitskenny
03-10-2011, 05:20 PM
Advan RGII 17x7.5 +41 all around

about 25inches from bottom tire to bottom fender. car is setup for Nasa Roadracing. 235 of a 7.5 width rim? Isn't that a little too much?

powdbyrice
03-10-2011, 10:12 PM
looks beefy. i posted pix elsewhere in this thread.

ragebomb
03-12-2011, 07:25 PM
http://i551.photobucket.com/albums/ii455/ragebomb99/ep3/DSC09926.jpg
http://i551.photobucket.com/albums/ii455/ragebomb99/ep3/DSC09928.jpg
http://i551.photobucket.com/albums/ii455/ragebomb99/ep3/DSC09929.jpg
http://i551.photobucket.com/albums/ii455/ragebomb99/ep3/DSC09924.jpg
http://i551.photobucket.com/albums/ii455/ragebomb99/ep3/DSC09923.jpg

Another contribution:
17x7" JDM ITR DC5 rims (+60 offset) w/ 15mm Ichiba type 2 spacers.
215/45/17
Mugen Sport Suspension

No rubbing.

nmysiismyn
03-12-2011, 07:49 PM
That subtle drop actually looks great with your setup! :thumbu:
Nice hatch sticker BTW! :mwink:

ragebomb
03-12-2011, 08:28 PM
That subtle drop actually looks great with your setup! :thumbu:
Nice hatch sticker BTW! :mwink:

Thx man. :) the 215/45 width (instead of the closer-to-stock-diameter of 205/45) for the tires messes with the speedo a tad but I think it's what helps with filling the wheel gap a bit more. And the ride is nearly identical to my 16x7 205/50/16 setup.

blackcivic11
03-22-2011, 08:32 PM
anyone have ay pics of some 17x8.5 ET35?

gonna have to run alot of camber? fender roll is probably a definate yes.

powdbyrice
03-22-2011, 10:09 PM
someone had rg2's in those specs i think...

camber will depend on your drop.

ps: if you search, you will find. ;)
http://www.ephatch.com/forum/showthread.php?55546-EP3-CTR-17x8.5-ET-30-Rota-s-with-Concave-D-*pics*&highlight=17

http://www.ephatch.com/forum/showthread.php?53730-17-quot-picture-tread/page2x8.5

best pics:
http://www.teamsunworks.com/forum/showthread.php?t=19480

MadLorEP3
03-23-2011, 12:59 AM
Thinking about running 245/40/17 on the fronts and 235/40/17 or 225/40/17 on the rears?
Debating between 17x8.5 +35 or 17x9 +35 all the way around OR 17x9 in the front and 17x8.5 in the rears.

In terms of height, I want 1 finger gap or less. Fenders are already rolled (front and rears) and I am not using any fender liners.

Will I have a mexipoke with this setup? I just want to be flush. Dont wanna be hella sunken either.

27rocks
03-23-2011, 10:40 AM
Thinking about running 245/40/17 on the fronts and 235/40/17 or 225/40/17 on the rears?
Debating between 17x8.5 +35 or 17x9 +35 all the way around OR 17x9 in the front and 17x8.5 in the rears.

In terms of height, I want 1 finger gap or less. Fenders are already rolled (front and rears) and I am not using any fender liners.

Will I have a mexipoke with this setup? I just want to be flush. Dont wanna be hella sunken either.

lol no!! I was the first one to roll on 17x9's frot and rear and 245's all the way around. Camber specs (mainly for hanling) with a finger gap F -3.2 R -2.8 No rubb no issues! You can run the 235's in the back if you want and even 225's to run less camber ~ -2.4 maybe but it wont be that much of a difference. My car rotates pretty good the way its set up right now and tire pressure can always help a little more too.

powdbyrice
03-23-2011, 08:36 PM
17x8.5 +31
http://img695.imageshack.us/img695/1711/089ju.jpg

j bones/team era5 from san diego i believe.

ep3jd
03-24-2011, 11:07 AM
That looks perfect

PatrickJamesYu
03-24-2011, 01:40 PM
185/55/16 on a 16x8
stupid?

whats your input

02TWSI
03-24-2011, 01:43 PM
16x8 isn't even aggressive. That's a pussy tire size for the EP.

ep3jd
03-24-2011, 01:51 PM
185/55/16 on a 16x8
stupid?

whats your input

2750 lb car on stretched 185???

That scares me lol. If you want more stretch just get wider wheels man!!

PatrickJamesYu
03-24-2011, 02:03 PM
Haha okay
well a Fit friend is giving me her 10% stock tires
and I wanted to mount them because I want 195/50.
I feel the 205/45's are too undersized, IMO.

ep3jd
03-24-2011, 06:34 PM
You want wider wheels

powdbyrice
03-24-2011, 08:12 PM
That looks perfect

i can't find anymore of his pix. :(

powdbyrice
03-24-2011, 08:14 PM
[IMG]http://i551.photobucket.com/albums/ii455/ragebomb99/ep3/DSC09926.jpg[IMG]


Another contribution:
17x7" JDM ITR DC5 rims (+60 offset) w/ 15mm Ichiba type 2 spacers.
215/45/17
Mugen Sport Suspension

No rubbing.
those look pushed out more than a 17x7 +45... maybe its the tire... :shrug:

ep3jd
03-24-2011, 08:14 PM
i can't find anymore of his pix. :(

They're all saved on my old computer. I'm 99% positive when I first got into fitment I saved them. Not that it matters because that computer somehow got thrown out? :mconfused: :mcry:

powdbyrice
03-24-2011, 08:14 PM
That looks perfect

ps: i like this more:
http://i85.photobucket.com/albums/k64/derek1_05/derek_civic_4727.jpg

ep3jd
03-24-2011, 08:16 PM
It's the same fitment lol


Edit: I THOUGHT YOU WERE A STRETCH H8R :MMAD:

PatrickJamesYu
03-24-2011, 08:18 PM
I like that look a whole lot..
ep3jd, what are the specs?!
wheels n tires

02TWSI
03-24-2011, 08:25 PM
http://img.photobucket.com/albums/v210/andrew5189/IMAG0229.jpg
16x7 +40 dropped on eibach pro kit stock shocks 205/45/16.

Ragebomb that is a sweet ass setup

ep3jd
03-24-2011, 08:25 PM
I like that look a whole lot..
ep3jd, what are the specs?!
wheels n tires




You know me too well...

4x100 17x8.5 +32 work emotion XD9 205/40-17 falken 512s


IIRC :mwink:

ep3jd
03-24-2011, 08:27 PM
I was set on those for a while.. But at $430 EACH that desire died quickly lol

powdbyrice
03-24-2011, 10:27 PM
It's the same fitment lol


Edit: I THOUGHT YOU WERE A STRETCH H8R :MMAD:

i am. =P

i'd raise it a bit and put more tire on it...

plus i'm a little biased, i had a nhbp.

MadLorEP3
03-25-2011, 12:00 AM
I talked to DAN from CCW and based on what I've seen from some of the whips on here it seems that 17x8.5 +32 is the perfect offset for the ep,

I know that many hatchers have been running 17x9 +35 just fine
I found the wheels that I like but its +40 instead of +35

So do you wheel fitment gurus think 17x9+40 will fit ok? Wheel offset calculator says 5 mm less inner clearance and a little bit more sunken in by 5 mm...

Like I said before Im gonna run 245/40 in the fronts and 235/40 in the rear

Type_R_Nammer
03-25-2011, 02:08 AM
http://img.photobucket.com/albums/v210/andrew5189/IMAG0229.jpg
16x7 +40 dropped on eibach pro kit stock shocks 205/45/16.

Ragebomb that is a sweet ass setup

Looks like my winter setup :p

ep3jd
03-25-2011, 04:47 AM
I talked to DAN from CCW and based on what I've seen from some of the whips on here it seems that 17x8.5 +32 is the perfect offset for the ep,

I know that many hatchers have been running 17x9 +35 just fine
I found the wheels that I like but its +40 instead of +35

So do you wheel fitment gurus think 17x9+40 will fit ok? Wheel offset calculator says 5 mm less inner clearance and a little bit more sunken in by 5 mm...

Like I said before Im gonna run 245/40 in the fronts and 235/40 in the rear


I think you'll need a 2-3mm spacer to clear suspension components

MadLorEP3
03-25-2011, 06:15 AM
I think you'll need a 2-3mm spacer to clear suspension components

damn ok tnx

I was hoping i wouldnt have to run spacers

but i guess a 5 mm spacer wouldnt be too bad

any suggestions on a good brand of spacers

ep3jd
03-25-2011, 06:29 AM
I believe that on a 9 wide the highest offset you can run is +38.

H&R is a good brand

Gresham
03-25-2011, 09:56 AM
I think the main power factor of the car is depends upon its suspension system if it will be great then the ride will give its extreme performance.

powdbyrice
03-25-2011, 12:37 PM
it only took a year to get this thread stickied. *rollseyes*

powdbyrice
03-25-2011, 12:38 PM
I think the main power factor of the car is depends upon its suspension system if it will be great then the ride will give its extreme performance.

wat?

27rocks
03-25-2011, 12:45 PM
it only took a year to get this thread stickied. *rollseyes*

lol a year and 6 days. Lets see if it works.

MadLorEP3
03-25-2011, 04:57 PM
I believe that on a 9 wide the highest offset you can run is +38.

H&R is a good brand

Cool tnx bro
Any idea if I will need extended studs?

27rocks
03-25-2011, 05:08 PM
Cool tnx bro
Any idea if I will need extended studs?

You can get away with 5mm on stock studs. Anything more then that you need either longer studs or those bolt on spacers.

MadLorEP3
03-25-2011, 06:04 PM
You can get away with 5mm on stock studs. Anything more then that you need either longer studs or those bolt on spacers.

AWESOME tnx
I will need to look into this
I might as well just do it right the first time and get longer studs
Or bolt on spacers.

usedep3
03-25-2011, 06:13 PM
yay! its been stickied!!

27rocks
03-25-2011, 06:26 PM
AWESOME tnx
I will need to look into this
I might as well just do it right the first time and get longer studs
Or bolt on spacers.
Just remember that if you do end up going with studs that you will have to take your entire front knuckle to a shop to have them first press out the bearings and then the studs. Then you have to get it all pressed back in. Its super dumb!!

yay! its been stickied!!

I know!!! Now noobs have no excuses making new threads asking if something fits lol.

civictype_r04
03-25-2011, 06:33 PM
I know!!! Now noobs have no excuses making new threads asking if something fits lol.

I give it till tomorrow afternoon!!


Sent from my iPod touch using Tapatalk

MadLorEP3
03-25-2011, 07:40 PM
I don't know what I was thinking earlier
For a 3mm or 5 mm spacer I can put a stack of cards in there lol
No need for studs at this point LOL

socmex7
03-25-2011, 10:55 PM
yay for stickie!

EP3CHRiS
03-26-2011, 01:27 PM
just doing a little homework from TireRack. Looking at getting some Enkei RPF1's.

wheel: 17x7
tire size: 215/45/17
offset: + 43
Backspacing: 5.62"

Will i half to roll fenders, and will i be rubbing?? Can i go with something bigger like a 225??

and most likely gonna be sitting on Racelands, but not slammed to the ground....

thanks

02TWSI
03-26-2011, 01:37 PM
I don't know what I was thinking earlier
For a 3mm or 5 mm spacer I can put a stack of cards in there lol
No need for studs at this point LOL

What a joke!

ep-unit
03-26-2011, 01:49 PM
Recently got rid of the 04-05 stockies and went with 06+ si wheels. 3-5mm Spacer are needed for the front with 04-05 brakes I went with 5mm.
Wheel Size: 17x7 +45 06+ si wheels
Tire Size: 225/45/17
Drop: Oem HFP suspension
Fenders Rolled: NO
Rubbing: NO
http://i269.photobucket.com/albums/jj49/ep-unit/photo-11.jpg

02TWSI
03-26-2011, 01:58 PM
The 8th gen wheels look great on our car

27rocks
03-26-2011, 02:25 PM
just doing a little homework from TireRack. Looking at getting some Enkei RPF1's.

wheel: 17x7
tire size: 215/45/17
offset: + 43
Backspacing: 5.62"

Will i half to roll fenders, and will i be rubbing?? Can i go with something bigger like a 225??

and most likely gonna be sitting on Racelands, but not slammed to the ground....

thanks

Look above ^^^^^ someone already has that spec with a pic and he says no roll no rub.

PatrickJamesYu
03-26-2011, 10:28 PM
Rota Boosts 17's in Inferno Orange on SSM ep3?

http://www.impressiveimportperformance.com/catalog/images/Wheels_Logo_Pics/Rota_Boost.jpg

http://sometestsite.com/blog/wp-content/uploads/2010/07/2011-orange-hoods1.jpg

ep3jd
03-27-2011, 03:40 AM
Only if they're 8 wide

civictype_r04
03-27-2011, 05:18 AM
Rota Boosts 17's in Inferno Orange on SSM ep3?

http://www.impressiveimportperformance.com/catalog/images/Wheels_Logo_Pics/Rota_Boost.jpg

http://sometestsite.com/blog/wp-content/uploads/2010/07/2011-orange-hoods1.jpg

Do it!!!


Sent from my iPod touch using Tapatalk

MadLorEP3
03-28-2011, 04:41 PM
so i finally sent the payment for the se37k 17x9 + 40
I will be getting some 5 mm H&R spacers

I know I want to get 245 on the fronts and 235 on the rears
I wanted to get dunlop direzza either dz101 or star spec
I was told that these run wide and that I should run235 for the front instead

Can someone confirm this?
If I wanted to run 245 what brand of tires will fit in the front

27rocks
03-28-2011, 05:19 PM
so i finally sent the payment for the se37k 17x9 + 40
I will be getting some 5 mm H&R spacers

I know I want to get 245 on the fronts and 235 on the rears
I wanted to get dunlop direzza either dz101 or star spec
I was told that these run wide and that I should run235 for the front instead

Can someone confirm this?
If I wanted to run 245 what brand of tires will fit in the front

We can fit 255's in the front all day log so even if the 245's run a little wider you should be fine. My 245's are almost completely square with the edge of the rim on the wheel and are a normal tire.

MadLorEP3
03-28-2011, 06:07 PM
We can fit 255's in the front all day log so even if the 245's run a little wider you should be fine. My 245's are almost completely square with the edge of the rim on the wheel and are a normal tire.


awesome thanks bro
245 it is...

ep3jd
03-29-2011, 05:05 AM
Dz101 run small also, so you're golden

blackcivic11
03-29-2011, 06:59 AM
17x8.25 ET25

anyone have anything that resembles this wheel size?

27rocks
03-29-2011, 10:05 AM
17x8.25 ET25

anyone have anything that resembles this wheel size?

Are you asking about fitment wise?? If so the closest thing i would say is maybe a 17x9 +35.

MadLorEP3
03-29-2011, 11:31 AM
Dz101 run small also, so you're golden

really? I was told the opposite

is there a site where I can check out the width of the different tires

Im interested in azenis, direzza dz1010, or star specs, maybe even fk 452

ep3jd
03-29-2011, 11:36 AM
I had dz101 and nitto neo gen on the same wheel. Neo gens had basically no stretch and the dz101 looked like they were about to explode off the rim.

27rocks
03-29-2011, 11:50 AM
really? I was told the opposite

is there a site where I can check out the width of the different tires

Im interested in azenis, direzza dz1010, or star specs, maybe even fk 452

If you go to their home sites they usually have either the specs on a separate page or PDF files with sizing/width overall circumferences radius track width etc. lol

27rocks
03-29-2011, 11:51 AM
I had dz101 and nitto neo gen on the same wheel. Neo gens had basically no stretch and the dz101 looked like they were about to explode off the rim.Were they the same size? :mbiggrin:

blackcivic11
03-29-2011, 12:00 PM
Are you asking about fitment wise?? If so the closest thing i would say is maybe a 17x9 +35.

I guess my question is would it fit? lol

In terms of pictures i've seen 17x9 ET35 but how much of a difference would the smaller wheel width but larger offset be?

MadLorEP3
03-29-2011, 12:40 PM
ill find out and post the info

ep3jd
03-29-2011, 01:19 PM
I guess my question is would it fit? lol

In terms of pictures i've seen 17x9 ET35 but how much of a difference would the smaller wheel width but larger offset be?



http://www.1010tires.com/wheeloffsetcalculator.asp



Were they the same size? :mbiggrin:

Yes lol

Forceinducted
03-31-2011, 10:13 AM
what do you think of this guys? BBS RS going for $550.

5x114.3 / 16x8 +45

http://s126.photobucket.com/albums/p94/mental0riental/BBS%20RS/

i have to look at it this saturday, if you guys think this will look good for my ep then i will buy it.

27rocks
03-31-2011, 10:28 AM
I guess my question is would it fit? lol

In terms of pictures i've seen 17x9 ET35 but how much of a difference would the smaller wheel width but larger offset be?

Yes it will fit. As far as the outside is concerned it is exactly the same as a 17x9 +35.

Kentoneseboi
03-31-2011, 10:34 AM
what do you think of this guys? BBS RS going for $550.

5x114.3 / 16x8 +45

http://s126.photobucket.com/albums/p94/mental0riental/BBS%20RS/


i have to look at it this saturday, if you guys think this will look good for my ep then i will buy it.

ur gonna need spacers.

PatrickJamesYu
03-31-2011, 11:37 PM
someone wants to trade me these for my xxr's
http://www.hondamarketplace.com/showthread.php?t=2411008

The ad is old, but it's got full pictures of what the wheels are.
I'm probably going to paint/powder coat them
Either Inferno Orange, or like black chrome, or gunmetal, or ssm.

any input?
Should I do it or nah?

ep3jd
04-01-2011, 05:03 AM
Me no likey

27rocks
04-01-2011, 09:45 AM
Me either... I don't like how the center cap part sticks out so much, but that Corolla is pretty clean.

02TWSI
04-01-2011, 09:51 AM
Rolla is clean for sure.


Anything is better than xxr imo.

nmysiismyn
04-01-2011, 11:46 AM
any input?
Should I do it or nah?

I don't think they're bad at all. I like that they're like Rotas, but aren't. I think if you're looking for a clean/quick escape outta running that camber you run, this would be a good trade... My 2¢.

PatrickJamesYu
04-01-2011, 07:04 PM
You know what, I actually decided I don't like them..
I figure if I don't know if I like them enough, to where I have to ask you guys, than I just must not like them..

I've been offered some black slipstreams, and some 16x8 +0 xxr's.
I'm not down for the xxr's, it's those super concaved ones you see on miata's and the tire size is like 205/40/16 which I'm not down for.
Someone offered slipstreams in 16 with a 205/45
but I'm not feeling the tire size, or the wheels too much
but they are simple and not anything crazy which isn't a bad thing

ep3jd
04-01-2011, 08:36 PM
Isn't your current tire size 205/45?


Just buy some rotas, your car looks nice with stance and rota has been catering to the 4x100 stance peep lately :msmile:

02TWSI
04-01-2011, 09:22 PM
Don't get the black slips....!

PatrickJamesYu
04-01-2011, 11:24 PM
Isn't your current tire size 205/45?


Just buy some rotas, your car looks nice with stance and rota has been catering to the 4x100 stance peep lately :msmile:

Yeah my current size IS a 205/45 which I think is a bit undersized..
I mean I had 17's or a little and even those were a 215/45 on a 17.. you know?
My car is just a bit difficult for me to daily, so I want to go with a more moderate set up
stance 17's instead

PatrickJamesYu
04-01-2011, 11:25 PM
Don't get the black slips....!
what size tires you one anyways? looks good

02TWSI
04-01-2011, 11:54 PM
my drop isn't slammed enough, don't lie to me :[

It's 205/45 right now. Plenty of gap to avoid hitting shit with stock shocks and aftermarket springs x.x

PatrickJamesYu
04-02-2011, 12:10 AM
my drop isn't slammed enough, don't lie to me :[

It's 205/45 right now. Plenty of gap to avoid hitting shit with stock shocks and aftermarket springs x.x

I'm don't only like slammed cars.. haha

02TWSI
04-02-2011, 12:28 AM
I'm don't only like slammed cars.. haha

Most people do though!

I love my slips, but I can't wait till I can either afford the real Rega's or CPRs....

ep3jd
04-02-2011, 11:55 AM
I like adhesive sized slips but no one ever has them

I'd rock 17x8.5 all day

ep3jd
04-02-2011, 11:58 AM
Yeah my current size IS a 205/45 which I think is a bit undersized..
I mean I had 17's or a little and even those were a 215/45 on a 17.. you know?
My car is just a bit difficult for me to daily, so I want to go with a more moderate set up
stance 17's instead

I had 16x8 +10 205/40... I feel you. That's why I ordered the 17x9s :mbiggrin:

02TWSI
04-02-2011, 11:59 AM
I like adhesive sized slips but no one ever has them

I'd rock 17x8.5 all day

For me, slips past 16 sort of look goofy.

ep3jd
04-02-2011, 12:38 PM
Yeah but if you're buying regamasters.... What sizes do you think they come in lol

02TWSI
04-02-2011, 12:39 PM
i'd get 16s, but all I see are 15s on nwp.

ep3jd
04-02-2011, 12:48 PM
I've never seen regas in anything less then 17x8

02TWSI
04-02-2011, 01:13 PM
http://forums.nwp4life.com/zerothread?id=19984 16's

http://forums.nwp4life.com/zerothread?id=22477 15's

civictype_r04
04-02-2011, 02:50 PM
I like adhesive sized slips but no one ever has them

I'd rock 17x8.5 all day

Same here dude!


Sent from my iPod touch using Tapatalk

civictype_r04
04-02-2011, 02:51 PM
I've never seen regas in anything less then 17x8

Me either!


Sent from my iPod touch using Tapatalk

MadLorEP3
04-06-2011, 04:03 PM
I know there are no issues running 245/40/17 in the fronts
what about 245/45/17, azenis only come in this size

can't decide between z1 specs or azenis?

ep3jd
04-06-2011, 08:06 PM
Me no likey 45 walls on 17s

27rocks
04-07-2011, 11:11 AM
I know there are no issues running 245/40/17 in the fronts
what about 245/45/17, azenis only come in this size

can't decide between z1 specs or azenis?

Yeah the 45 sidewall is a bit much for our cars. The 245/40 is already a little bit bigger then the stock recomended radius and that extra 5 will make it even more. I say either go with the Dunlops z1's or the now new available Hankook RS3's.

MadLorEP3
04-07-2011, 10:37 PM
Yeah the 45 sidewall is a bit much for our cars. The 245/40 is already a little bit bigger then the stock recomended radius and that extra 5 will make it even more. I say either go with the Dunlops z1's or the now new available Hankook RS3's.

im gonna check out the rs3's havent heard about them yet, till now

27rocks
04-08-2011, 10:08 AM
im gonna check out the rs3's havent heard about them yet, till now

They are a pretty darn good tire. I would say they are deffinitely in the top 5 of that group of tires. I wanted to get them when they first came out but they only offered them in a 225 and i think a 255 and up. Now they are finally making them in more sizes which i only found out a couple of days ago myself.

02TWSI
04-08-2011, 10:22 AM
Just run nexens, you're not going to track anyways.

Buying azenis, or any "good" tire for pure bling factor is just wronnng

MadLorEP3
04-08-2011, 11:08 AM
Just run nexens, you're not going to track anyways.

Buying azenis, or any "good" tire for pure bling factor is just wronnng

how the hell do you know Im not going to track LOL
besides with all the ponies I will have under the hood
there's no point cheaping out on some nexens LOL
Tires and alignment are the most important part of the build...thats a known fact son...

EDIT: stoopid comments like yours get me all heated...:mad2:

02TWSI
04-08-2011, 11:58 AM
*shrug*

jri93
04-10-2011, 10:08 AM
wheel- 17x7.5 +45
tire- 225-45-17
eibach prokit. 1in. drop front and back, but i think they have settled/ sagged a bit. no fender rolling.

will it fit? or will i rub?

DRP967
04-10-2011, 02:44 PM
wheel- 17x7.5 +45
tire- 225-45-17
1.5' drop front and back, no fender rolling.

will it fit? or will i rub?

^

Bump for an answer . Ill be running a similar set up:

Wheel: 17x7, +45

Tire: 225/45/17

Drop: Zero finger gap - slight tuckage *Rear fenders are rolled*

*Will this fit as well?

dirtyMETHOD
04-10-2011, 03:02 PM
Ordered a set of wheels 17x8 +40. Going to be running my old set of 215/45's since I own them. Thinking of later running 225/45 since it's a daily. I have an HFP suspension on.

Anyone running 235's in the rear without rolling fenders? If so, what offset?

PatrickJamesYu
04-10-2011, 04:44 PM
Anyone running 205/40/17 on a 17x7 +45?

pics please

jri93
04-10-2011, 06:04 PM
wheel- 17x7.5 +45
tire- 225-45-17
eibach prokit. 1in. drop front and back, but i think they have settled/ sagged a bit. no fender rolling.

will it fit? or will i rub?

cmon i know somebody has had experience with this wheel tire combo. i need conformation that this fits because i am looking to buy in the next couple days. my other choice would be a 215/45/17. but id rather the 225 if it wil fit.

27rocks
04-10-2011, 07:05 PM
wheel- 17x7.5 +45
tire- 225-45-17
eibach prokit. 1in. drop front and back, but i think they have settled/ sagged a bit. no fender rolling.

will it fit? or will i rub?


^

Bump for an answer . Ill be running a similar set up:

Wheel: 17x7, +45

Tire: 225/45/17

Drop: Zero finger gap - slight tuckage *Rear fenders are rolled*

*Will this fit as well?

My old set of wheels were 17x7.5 with a +40 offset and i ran a wider then normal 225/45 with no issues. I was lowered more then that and didn't have my fenders rolled at the time. I believe i was running -1 or camber in the rear and about -2 up front just to keep the front end from pushing a bit. But the rear should be fine.

27rocks
04-10-2011, 07:09 PM
Anyone running 205/40/17 on a 17x7 +45?

pics please

They are so small!!!! My brother was running that on a 7.5 +40 (not like the offset really matters) on his wagovan lol. They looked somewhat ok but still to small even though those cars are pretty small to begin with.

PatrickJamesYu
04-10-2011, 11:42 PM
They are so small!!!! My brother was running that on a 7.5 +40 (not like the offset really matters) on his wagovan lol. They looked somewhat ok but still to small even though those cars are pretty small to begin with.

isn't that stock ep3 ctr though? 17x7 +45 205/40?

Wheel size is fine though, yeah? You're just saying the tire is small?
I agree small tires though..
I was thinking more along 225/45
But the wheels I'm considering getting has the 205/40's with some life left in them

DRP967
04-11-2011, 06:59 AM
isn't that stock ep3 ctr though? 17x7 +45 205/40?

Wheel size is fine though, yeah? You're just saying the tire is small?
I agree small tires though..
I was thinking more along 225/45
But the wheels I'm considering getting has the 205/40's with some life left in them

I dunno 205 is pretty narrow, even my 215s look narrow.

I thought the stock tire for the CTR is 215/40/17s unless I am mistaken.

*I think the 225/45/17 is decent...thats what I plan to get. 225s.

DRP967
04-11-2011, 07:03 AM
http://i276.photobucket.com/albums/kk22/hovblackctr/CivicTA20.jpg

Anyone know the wheel size/offset and tire size on this race prepped EP3? Also what the camber settings might be front/rear? Tires dont look that wide imo...maybe its just me?

*Reason I ask is because I was planning to do the whole 17x9/17x8 thing but now im not sure. Supposedly I will have to have some wheel gap to accommodate that set up....dont plan on raising the car. If anything I wanna tuck the tires. I thought 17x8/9 = better handling/contact patch on the road but the red EP3 above says different. Doesnt even look like its staggered?

27rocks
04-11-2011, 08:45 AM
isn't that stock ep3 ctr though? 17x7 +45 205/40?

Wheel size is fine though, yeah? You're just saying the tire is small?
I agree small tires though..
I was thinking more along 225/45
But the wheels I'm considering getting has the 205/40's with some life left in them

Yeah i was talking about the tire. They are freaking tiny with very little sidewall.

27rocks
04-11-2011, 08:48 AM
http://i276.photobucket.com/albums/kk22/hovblackctr/CivicTA20.jpg

Anyone know the wheel size/offset and tire size on this race prepped EP3? Also what the camber settings might be front/rear? Tires dont look that wide imo...maybe its just me?

*Reason I ask is because I was planning to do the whole 17x9/17x8 thing but now im not sure. Supposedly I will have to have some wheel gap to accommodate that set up....dont plan on raising the car. If anything I wanna tuck the tires. I thought 17x8/9 = better handling/contact patch on the road but the red EP3 above says different. Doesnt even look like its staggered?

You have to remember this is a race car. Race cars have regulations. The article you read about this car might be talking about the best set up they were able to use and still stay within the rules. Im sure if they were allowed to run wider wheels and tires in the front they would have.

PatrickJamesYu
04-11-2011, 09:59 AM
Yeah i was talking about the tire. They are freaking tiny with very little sidewall.

okay yeah, I got the tire calc to work (it wasn't loading for some reason)
anyways, I feel my 205/45/16's were way too undersized, and I didn't think the -5% ratio of the 17's would be more than a full inch.
They end up being even smaller than my 16's.
Whats a decent tire size?
I'm thinking either 215/45 or 225/45.
I'm just going to daily, low with stock camber/caster/toe. maybe like a degree in the front

27rocks
04-11-2011, 10:28 AM
Personally i wouldn't go any lower then 225/45's. My car is an 02 and it came stock with those tiny ass 15's which i hated to death!!!! Plus it had 195's on it stock :mconfused: WTF really Honda of America???!!!!

Seeing as how CTR's came stock with 215's i believe and one is upgrading i would assume upgrading would mean you at least go up one size.. 225's.

just my .02.

MokujinX5
04-11-2011, 11:18 AM
I have H&R with a 2" drop and need to find which 17x8s will fit. I have no idea what offest I would need. Looking at some gold Rota Boosts - +48 or +35 are the offsets I've found. Are there other offsets I'm missing for these wheels? Which ones would work without rubbing on anything (w/225 45/17 tires)?

Thanks y0!

27rocks
04-11-2011, 11:24 AM
I have H&R with a 2" drop and need to find which 17x8s will fit. I have no idea what offest I would need. Looking at some gold Rota Boosts - +48 or +35 are the offsets I've found. Are there other offsets I'm missing for these wheels? Which ones would work without rubbing on anything (w/225 45/17 tires)?

Thanks y0!

With 17x8's you can't go any higher in offset then +40 i believe otherwise you will run the risk of rubbing on the inside trailing arm or suspension. And also with anything 8 and up you will have to roll your fenders in the back regardless.

ep3jd
04-11-2011, 11:29 AM
I believe guardian has 17x8.5 +40 so there must be some more room in there!

MokujinX5
04-11-2011, 03:06 PM
With 17x8's you can't go any higher in offset then +40 i believe otherwise you will run the risk of rubbing on the inside trailing arm or suspension. And also with anything 8 and up you will have to roll your fenders in the back regardless.

So the 17x8 +38 should work. I don't mind rolling the fenders, in fact, I'd love to find a place near me that would pull my fenders a little.

27rocks
04-11-2011, 07:03 PM
I believe guardian has 17x8.5 +40 so there must be some more room in there!

Ahh yes you are correct!!! I had my calculations wrong. For some reason i was thinking of 9's and those i believe you can only run a +38 or lower. The 17x8.5 +40 should come out to pretty much a 17x9 +35.

civictype_r04
04-11-2011, 07:07 PM
Ahh yes you are correct!!! I had my calculations wrong. For some reason i was thinking of 9's and those i believe you can only run a +38 or lower. The 17x8.5 +40 should come out to pretty much a 17x9 +35.

I thought the 17x8.5 +30 were the same as the 17x9 +35.... Now your saying +40???? Lol

Sent from my HTC THUNDERBOLT using tapatalk

PatrickJamesYu
04-11-2011, 07:30 PM
Pic request!
17x7 +42 215/45/17 on an ep3.

ep3jd
04-12-2011, 04:39 AM
I thought the 17x8.5 +30 were the same as the 17x9 +35.... Now your saying +40???? Lol

Sent from my HTC THUNDERBOLT using tapatalk

The 8.5 +30 pokes 1mm farther then 9 +35


8.5 +40 = 8 +35

powdbyrice
04-13-2011, 08:58 PM
Ordered a set of wheels 17x8 +40. Going to be running my old set of 215/45's since I own them. Thinking of later running 225/45 since it's a daily. I have an HFP suspension on.

Anyone running 235's in the rear without rolling fenders? If so, what offset?

I was on hfp. Had 17x7.5 +45 w/ 235/40/17.

No rubbing. No rolled Fenders. No camber kit.

02TWSI
04-14-2011, 04:31 PM
Pics?

ep3_2_envy
04-15-2011, 04:14 AM
i looked through this thread a bit but didnt see what im looking for. i have 16x7 rota wheels, not sure of offset maybe like 43 or what ever the normal is.
i found a deal on some 225/45/16's.. 7 looks like the lowest rim width i should use according to tirerack. i was wondering if its safe to run that tire on that wheel and will i have fitment issues.? my hatch is fairly low(not dumped) on tein coilovers.
thanks in adv.

edit: also found a set of 225/50's on a local forum. those may not fit and will prob be significantly larger around and more $$. any input would be great.
thanks again

ep3jd
04-15-2011, 05:16 AM
Both tire sizes are fine and will work

civictype_r04
04-15-2011, 07:14 PM
Pic request!
17x7 +42 215/45/17 on an ep3.

Look at my car with the white buddy clubs on it.

Sent from my HTC THUNDERBOLT using tapatalk

arejaygsx
04-17-2011, 03:27 PM
just got some rota gforce 17x8 offset 48 225/45 tires. like a dummy didnt really research offset so Im rubbing on the rear arms. I found some spacers from http://www.ichibausa.com/whspveii.html but they only come in 15,20 and 25mm. Im not looking for to much poke on Im lowered on ksport coilovers. Im low enough to have no wheel gap. What do u guys think what size spacer?

ep-unit
04-17-2011, 04:03 PM
just got some rota gforce 17x8 offset 48 225/45 tires. like a dummy didnt really research offset so Im rubbing on the rear arms. I found some spacers from http://www.ichibausa.com/whspveii.html but they only come in 15,20 and 25mm. Im not looking for to much poke on Im lowered on ksport coilovers. Im low enough to have no wheel gap. What do u guys think what size spacer?

I think 5mm should be enough all around making it +43 all around and that way you don't have to get extended studs or spend a whole lot vs getting 15-20 since theyre much expensive, the 5mm spacers I'm running cost around $30 for the pair just make sure you get hubcentric

BigBurch422
04-19-2011, 12:05 PM
ok i've seen a couple people say that 17x7.5 +45 with a 225/45/17 will fit fine, but they mainly had only 1" drops. should i be ok running these specs if i'm lowered 2" on h&r springs? fender's aren't rolled at all and my alignment specs are whatever was listed in that age old "agressive street alignment" thread that musty or somebody made lol eventually i may throw on the HFP suspension i have laying around, but for now it'll be going on with my h&r springs if it'll fit...

ep3jd
04-19-2011, 12:52 PM
Roll your fenders and it will.

BigBurch422
04-19-2011, 01:31 PM
Roll your fenders and it will.

that's what i was afraid of. ok, gracias.

ep3jd
04-19-2011, 01:42 PM
De nada

x3thelast
04-22-2011, 01:33 AM
Question to the slammed set ups. i want to run 17x9 all around.
whats your offset, camber, height and tire sizes.


????

.colin
04-22-2011, 04:08 AM
ok i've seen a couple people say that 17x7.5 +45 with a 225/45/17 will fit fine, but they mainly had only 1" drops. should i be ok running these specs if i'm lowered 2" on h&r springs? fender's aren't rolled at all and my alignment specs are whatever was listed in that age old "agressive street alignment" thread that musty or somebody made lol eventually i may throw on the HFP suspension i have laying around, but for now it'll be going on with my h&r springs if it'll fit...

it should fit. I have 17 x 7.5 +43 with a 225/45/17 and a 1.5" drop.

lemonhead228
04-24-2011, 12:16 AM
I would like rims wit at least a 2" lip and 17s.

I have mugen ss sturts wit tien s springs so drop is about 1-1.5

Anybody have ideals about this set up? I'm not to good wit offset.

27rocks
04-24-2011, 09:49 AM
I would like rims wit at least a 2" lip and 17s.

I have mugen ss sturts wit tien s springs so drop is about 1-1.5

Anybody have ideals about this set up? I'm not to good wit offset.

The lip mainly depends on the wheel design not the offset, but the lower the offset the more lip you will have. In order to achieve this you will have to buy some expensive wheels and stretch the hell out of tires with tons of camber. IMO its a waste but its your car so best of luck to you.

ep3jd
04-24-2011, 02:59 PM
Question to the slammed set ups. i want to run 17x9 all around.
whats your offset, camber, height and tire sizes.


????

17x9 +25
205/40 falken 912s
-1.9 rear
-.5 front
Tucks all around

02TWSI
04-24-2011, 03:20 PM
17x9 +25
205/40 falken 912s
-1.9 rear
-.5 front
Tucks all around

rubberband man!!

ep3jd
04-24-2011, 05:53 PM
rubberband man!!

Same as miah

Brig
04-29-2011, 03:30 PM
Ok, first post...I'm a newb. I'm looking at Oem Acura TL wheels for my EP. 17x8 and 45 offset. I'm on stock suspension right now but will be dropping @ 1" this summer......will I need spacers for the rear? 215(or 225)/45-17 will be the tire size.
Thanks

ep3jd
04-29-2011, 03:34 PM
The tl type s wheels?? You need a spacer but I'm not sure what size

dirtyMETHOD
04-29-2011, 04:05 PM
Get 5mm spacers. For sure.

Im running 17x8 +40 Its perfect. I used my old 215/45s and it is perfect with my HFP drop. No rolling the rear fenders required for 215, but its like 2mm of clearance from the fender when tucked.

I've been toying with the idea of 225s but rolling the rears would be needed, so if I roll, i'll do 235/40s; When in Rome.

Now, what is the best way to go about rolling the rears? Is there a DIY that comes out clean?

Perry
04-29-2011, 07:29 PM
Hi guys,
Quite new here have a very noob question. What tyre size would you recommend for the following wheels spec as I still have plenty of tread on my current 215's:

17x8 F:+35 and R+45 225's or should I slap the 215's on? Car is current lowered with 1.5 finger space clearance at the front and 0.5 finger space at the rear.

Cheers
Perry

lucky7
04-29-2011, 07:44 PM
215 to 225 isn't a real big difference. you're offsets are super high, so they should fit without a problem. my brain isn't working correctly any more tonight, but being that you're not that low, i don't see any issues.

cant catch me
04-29-2011, 10:23 PM
i just threw some 17's on mine and i had the same debate going on. i eventually chose to go with a 215 45 17 to be safe and not risk rubbing in my wheel well or fenders. i must say my choice has most definately improved overall handling.

ep3jd
04-30-2011, 06:08 AM
2" drop is filled perfectly with 215/45/17 but I'd rather drag my balls down the street on 205/40 :mbiggrin:

lucky7
04-30-2011, 07:51 AM
me too. lol.

Perry
04-30-2011, 07:54 AM
215 to 225 isn't a real big difference. you're offsets are super high, so they should fit without a problem. my brain isn't working correctly any more tonight, but being that you're not that low, i don't see any issues.

Cheers dude.

lemonhead228
05-03-2011, 12:58 PM
Hey I'm lookin at some rpf1 that somebody local is selling. Would 18x8.5 +32 fit on our Ep? It doesn't have tires on them.

I'm drop on mugen ss which is about 1.5

ep3jd
05-03-2011, 01:00 PM
Yeah they'll fit but what size tire do you want to run?

lemonhead228
05-03-2011, 03:07 PM
Im not sure what i should run.. any recommendation?

i preciate the help

ep3jd
05-03-2011, 03:14 PM
What kind of look are you trying to achieve

lemonhead228
05-03-2011, 05:16 PM
What kind of look are you trying to achieve

to set flush. i dont want to stretch the tires. hopefully they wont be any rubbing issues

Lucid Moments
05-04-2011, 05:09 AM
Looking at picking up some spare wheels to take to the track with me and ran across these (http://www.nlmotoring.com/XXR-527-Wheels-17x8-25-Matte-Black-p/52778082.htm). 17X8.25 +25 offset. Think they'll fit with 225/45/17 or 235/40/17 tires on them?

ep3jd
05-04-2011, 05:23 AM
to set flush. i dont want to stretch the tires. hopefully they wont be any rubbing issues

18s are really big and if you want to be even close to low you'll need real little tires

lemonhead228
05-04-2011, 11:32 AM
18s are really big and if you want to be even close to low you'll need real little tires

you think 215/40 would be straight

ep3jd
05-04-2011, 12:15 PM
You'll get a little stretch out of that size, but yeah as long as you don't want to be slammed that's fine

ep3jd
05-04-2011, 12:16 PM
But you will rub unless you roll, and probably add 1-2 degrees negative camber

powdbyrice
05-04-2011, 11:21 PM
Looking at picking up some spare wheels to take to the track with me and ran across these (http://www.nlmotoring.com/XXR-527-Wheels-17x8-25-Matte-Black-p/52778082.htm). 17X8.25 +25 offset. Think they'll fit with 225/45/17 or 235/40/17 tires on them?

no. well, depends on your drop.

17x8 +35 sits almost flush when lowered a little bit (~1")

17x8.25 +25 is going to poke i think...

MadLorEP3
05-06-2011, 02:32 AM
Still have not bought my tires...I'm still waiting on a good deal and being lazy

Do you guys think I will have any issues if I run 255/40/17 in the front on 17x9+40 with 5mm spacers. Will this be sticking out too much?
How much will I be able to drop the car with this set up? Im not trying to slam the ride just about 1 1/2" drop
Not yet sure if I should go 225 or 235 on the rears?

Lucid Moments
05-07-2011, 06:33 PM
no. well, depends on your drop.

17x8 +35 sits almost flush when lowered a little bit (~1")

17x8.25 +25 is going to poke i think...

A little poke doesn't especially bother me in and of itself, but it might give me clearance issues. I'm not very low at all, but may be changing my ride height when I get the RCA balljoints I have installed.

.colin
05-15-2011, 11:48 AM
I'm thinking about getting either 10 mm or 15 mm spacers. My wheels are 17x7.5 et 48 with a 225/45/17. My drop is 1.4". My camber is -.5 front and -1.5 rear. What spacer can I run without having to roll my fenders or run extra camber? I think 10mm?

powdbyrice
05-15-2011, 12:41 PM
+10 is safe.

17x8 +35 you have to roll the fenders, so i would assume that 17x7.5 +33 would be safe as well.

Type_R_Nammer
05-15-2011, 01:41 PM
Quick question.

Currently I'm running 17x7 et42 with 215/45/17 tires.

Would I need to roll my rear fenders if I want to run -1.25 of camber?

.colin
05-15-2011, 02:06 PM
Quick question.

Currently I'm running 17x7 et42 with 215/45/17 tires.

Would I need to roll my rear fenders if I want to run -1.25 of camber?

No

ivtec_do_u
05-17-2011, 07:17 PM
Hey guys need help somewhat urgently. Purchased 16x8 +20 grid offroads with 205 55 16 tires. Got a camber kit for the rear and coils. Looking for about a 2" drop (little more or less is cool too) do I have to roll the fenders? How much camber will I be looking at to tuck. (I don't want to roll fenders because I have not found a competent shop in cleveland that has the tool. Only the ol mallet trick.) Thanks guys let me know what kind of trouble I have got myself into.

SHG_EasyE
05-17-2011, 08:20 PM
Still have not bought my tires...I'm still waiting on a good deal and being lazy

Do you guys think I will have any issues if I run 255/40/17 in the front on 17x9+40 with 5mm spacers. Will this be sticking out too much?
How much will I be able to drop the car with this set up? Im not trying to slam the ride just about 1 1/2" drop
Not yet sure if I should go 225 or 235 on the rears?

They will probably fit without the spacers with -3.5 to -4 camber.

Ive got 17x9 +35 with 245's and its a perfect snug fit with -3.5. But Ive also got the DC5R arms which push me out an extra 15mm

MadLorEP3
05-17-2011, 10:37 PM
They will probably fit without the spacers with -3.5 to -4 camber.

Ive got 17x9 +35 with 245's and its a perfect snug fit with -3.5. But Ive also got the DC5R arms which push me out an extra 15mm

awesome tnx for the info

i guess ill be searching for the dc5r arms with the king motorsport bushings

thanks

PatrickJamesYu
05-20-2011, 08:27 AM
Anyone have pics of a 17x7 +40
and a 17x7.5 +40?
Pretty common sizes, so hopefully someone can post up.
Also mention your tire size!


Thanks!

ep3jd
05-20-2011, 05:00 PM
http://pbr230.photobucket.com/albums/ee213/halfwitboyx3/2011-05-20194024.jpg


My cell phone camera is pretty good, but when they're vertical it switches automatically when I load them straight to the site. So I have to put em on photobucket, and it kills the quality

R3B1RTH
05-24-2011, 08:00 PM
1st post w00t! and quick question after reading page after page of this thread, Will a +42 offset with 215/40/17 tires and a 2" drop rub when i turn? Thanks

PatrickJamesYu
05-24-2011, 08:57 PM
1st post w00t! and quick question after reading page after page of this thread, Will a +42 offset with 215/40/17 tires and a 2" drop rub when i turn? Thanks

I don't think so

ep3jd
05-25-2011, 06:44 AM
1st post w00t! and quick question after reading page after page of this thread, Will a +42 offset with 215/40/17 tires and a 2" drop rub when i turn? Thanks

Kinda need the wheel width to determine that...

ace of spades
05-25-2011, 07:37 AM
1st post w00t! and quick question after reading page after page of this thread, Will a +42 offset with 215/40/17 tires and a 2" drop rub when i turn? Thanks

that's my exact setup (17x7) and no it won't unless your shocks are blown. mine are. :(

ep3jd
05-25-2011, 07:48 AM
Buy my dc5s suspension

ace of spades
05-25-2011, 08:06 AM
I'll trade you a road bike for it

27rocks
05-25-2011, 09:48 AM
Anyone have pics of a 17x7 +40
and a 17x7.5 +40?
Pretty common sizes, so hopefully someone can post up.
Also mention your tire size!


Thanks!

My old sets were 17x7.5 +40 and i ran a 225/45 tire on it.
Sorry about the pics this was 4+ years ago and i don't have very good ones
http://i58.photobucket.com/albums/g248/k20ep3/262030365_883863087_0.jpg

http://i58.photobucket.com/albums/g248/k20ep3/l_069038e38c288f279f78ca4b12a4311a.jpg

http://i58.photobucket.com/albums/g248/k20ep3/232858030_780018561_0.jpg

blackcivic11
05-25-2011, 10:41 AM
What is flush fitment for 17x7 with rolled fenders and 205/45/17 tires?

ep3jd
05-25-2011, 10:57 AM
I wish 225/40-17 tires existed :mfrown:

27rocks
05-25-2011, 11:03 AM
I wish 225/40-17 tires existed :mfrown:

The 45 sidewall is actually nice. It's really close to the 40's i have now on the 245's.

ep3jd
05-25-2011, 11:06 AM
I want less stretch but 225 and a 45 direct ratio is too big for me. Gotta stay low, ya know :lol:

27rocks
05-25-2011, 11:09 AM
lol you are talking about maybe a 1/4 to 1/2 of an inch if even that.

ep3jd
05-25-2011, 11:14 AM
1-1/2" over my current 205/40 though!!!

27rocks
05-25-2011, 11:17 AM
1-1/2" over my current 205/40 though!!!

lol you are way below stock fitment then.

PatrickJamesYu
05-25-2011, 11:19 AM
What do you guys think about a 16x8 +15 on a beefier tire?
205/50, ugly?

ep3jd
05-25-2011, 11:19 AM
I used to have 205/40 16 hahahahaha.

I'm gonna up it to 215/40 soon.


Probably go with neo gens again this time

ep3jd
05-25-2011, 11:21 AM
What do you guys think about a 16x8 +15 on a beefier tire?
205/50, ugly?

Too much side wall for stretch IMO

PatrickJamesYu
05-25-2011, 11:29 AM
Too much side wall for stretch IMO

hey so when you daily around all hellaflush like that, do you like rub tire/fender a whole lot?
Like even on some of the smoothest roads?
When you go into drive ways, or any smalll incline does it rub?

ep3jd
05-25-2011, 11:30 AM
I don't rub at all, ever

PatrickJamesYu
05-25-2011, 11:31 AM
What's your fitment like?

How much gap between tire and fender
and suspension set up?
Sways?

ep3jd
05-25-2011, 11:33 AM
http://tapatalk.com/mu/d0362d31-4b4a-de25.jpg


Basically tucking. Doesn't look like it there because of the angle though


No sway bahz for me

PatrickJamesYu
05-25-2011, 11:46 AM
How easy do you think it will be to run a 16x8 +15
I'm rocking 16x8 +0 now, which is cool and all but I think it's just a hair too much.

usedep3
05-25-2011, 11:49 AM
I wish 225/40-17 tires existed :mfrown:

me too. me too...

ep3jd
05-25-2011, 11:54 AM
How easy do you think it will be to run a 16x8 +15
I'm rocking 16x8 +0 now, which is cool and all but I think it's just a hair too much.

Very easy! My old 16x8 +10 were a breeze. But you should rock 205/45 again.

A roll and -1.5 MAYBE -2 and I ver you'll be golden.

27rocks
05-25-2011, 11:55 AM
How easy do you think it will be to run a 16x8 +15
I'm rocking 16x8 +0 now, which is cool and all but I think it's just a hair too much.


You are looking at just a little bit over 1/2 difference. So the edge of the rim will be further in by just a little over 1/2 inch.

PatrickJamesYu
05-25-2011, 11:58 AM
Okay so how about this guys
Trade my XXR002's
for XXR521 16x8 +15 with 205/45 tires?
Seem's decent to me

ep3jd
05-25-2011, 12:04 PM
http://tapatalk.com/mu/d0362d31-50ec-8948.jpg

I think it looked mean. I would have liked +20 or +15 but I went with +10 over a miscommunication.


Good luck!

ep3jd
05-25-2011, 12:06 PM
Okay so how about this guys
Trade my XXR002's
for XXR521 16x8 +15 with 205/45 tires?
Seem's decent to me


Yeah as long as they aren't ugly lol what do they look like?

nmysiismyn
05-25-2011, 12:29 PM
The 521's style would look a lot better in a 17, but at least they aren't the whored-out 002's :mangel:

I thought you were over the crazy camber thing?

ep3jd
05-25-2011, 12:31 PM
I looked em up. They iiiiiiiiiiiight. What color

blackcivic11
05-25-2011, 12:51 PM
anyone know?

flush fitment 17x7?

27rocks
05-25-2011, 01:05 PM
anyone know?

flush fitment 17x7?

I would say +25 to +30...

PatrickJamesYu
05-25-2011, 01:12 PM
The 521's style would look a lot better in a 17, but at least they aren't the whored-out 002's :mangel:

I thought you were over the crazy camber thing?


I looked em up. They iiiiiiiiiiiight. What color

Gold w/ poish lip
And I am over the whole camber thing
But these are a +15, also they are the nicest wheel's I've been offered so far.

I've been offered 17 slipstreams in white
and some other crabby wheels
There was one which was bbs lm reps which I was down for, but the guy is way too hard to work with
So I'm looking else where

Someone on here offered rpf1 replicas, but he hasnt gotten back to me on spec..

PatrickJamesYu
05-25-2011, 01:33 PM
What will 16x7.5" +20 going to be like?
I'd probably run a 195/50. nothing significant.
What will the poke be like?
I'd like to be flush, not hellaflush.

ep3jd
05-25-2011, 01:48 PM
What will 16x7.5" +20 going to be like?
I'd probably run a 195/50. nothing significant.
What will the poke be like?
I'd like to be flush, not hellaflush.

14 mm less poke then the xxrs you had.


And 1 mm more then the xxrs you were offered on trade.

PatrickJamesYu
05-25-2011, 03:07 PM
The 521's style would look a lot better in a 17, but at least they aren't the whored-out 002's :mangel:

I thought you were over the crazy camber thing?


Thanks!
Also another question for you tire guys and stance guys

I might be getting 17x8.25 +25
What size tires?!

ep3jd
05-25-2011, 03:18 PM
Thanks!
Also another question for you tire guys and stance guys

I might be getting 17x8.25 +25
What size tires?!

205/40 all day.

rps.13
05-26-2011, 12:03 AM
What will 16x7.5" +20 going to be like?
I'd probably run a 195/50. nothing significant.
What will the poke be like?
I'd like to be flush, not hellaflush.

here's a 16x7.5 +24, running a 205/55 that came with the wheels... test fitted at stock height, guards unmolested:

http://i613.photobucket.com/albums/tt212/KAIZENRPS_13/DSC00297.jpg?t=1287294630

http://i613.photobucket.com/albums/tt212/KAIZENRPS_13/DSC00301.jpg?t=1287294630

http://i613.photobucket.com/albums/tt212/KAIZENRPS_13/DSC00310-1.jpg?t=1306392977

http://i613.photobucket.com/albums/tt212/KAIZENRPS_13/DSC00306-2.jpg?t=1306393348

chuck83
05-26-2011, 09:59 AM
so im going with a set of 17x9 +28, but heres my dilemma.. i already have a set of brand new, never even driven on 215/45 ze512's mounted on my old wheels which are 17x7.i dont want to buy new tires again if i dont have to. i can find tons of pictures of 215/45's on 17x9's but i cannot find any on an EP and im not sure if its going to be too much sidewall on a 9. Ive seen 205/45 and it looks just fine to me. Im pretty low on GC's and my fenders are already rolled, and im running -3.5 degrees in the back so im not too worried about rubbing... do you guys think 215/45 is going to be too tall and look goofy?

02TWSI
05-26-2011, 10:15 AM
Thanks!
Also another question for you tire guys and stance guys

I might be getting 17x8.25 +25
What size tires?!

215/40 bruhh

27rocks
05-26-2011, 10:16 AM
No. I think the fact you have 215's on a 9" wheel will look more goofy lol.

blackcivic11
05-27-2011, 11:10 AM
will a 17x8.5 +25 fit?

27rocks
05-27-2011, 11:33 AM
will a 17x8.5 +25 fit?

You will need to roll the rear and run a little bit of camber but it will fit.

powdbyrice
05-27-2011, 12:44 PM
will a 17x8.5 +25 fit?
its gonna stick out past the fenders...

http://i85.photobucket.com/albums/k64/derek1_05/derek_civic_4727.jpg
Work XD9 17x8.5 +32 4x100
Falken 205/40/17

27rocks
05-27-2011, 12:57 PM
its gonna stick out past the fenders...

http://i85.photobucket.com/albums/k64/derek1_05/derek_civic_4727.jpg
Work XD9 17x8.5 +32 4x100
Falken 205/40/17

Technically my wheels stick out further than that yet they look like they fit better even with a 245 tire on there :mconfused:

blackcivic11
05-27-2011, 01:15 PM
I hate choosing wheels.... LOL

SHG_EasyE
05-27-2011, 02:45 PM
so im going with a set of 17x9 +28, but heres my dilemma.. i already have a set of brand new, never even driven on 215/45 ze512's mounted on my old wheels which are 17x7.i dont want to buy new tires again if i dont have to. i can find tons of pictures of 215/45's on 17x9's but i cannot find any on an EP and im not sure if its going to be too much sidewall on a 9. Ive seen 205/45 and it looks just fine to me. Im pretty low on GC's and my fenders are already rolled, and im running -3.5 degrees in the back so im not too worried about rubbing... do you guys think 215/45 is going to be too tall and look goofy?

Are you serious? Youre worried about a 215 45 being too much tire on a 9 inch wheel? Dude get off the pipe and put proper tires on the wheels.

chuck83
05-28-2011, 07:51 PM
you guys are right.. im over the whole stretched malarkey. dunno wtf i was thinking.. much rather be able to handle. i sold the 215's i had today and got most of my money back for them.

so i've decided to go with 17x8 +35, and i've narrowed tire choices in my budget down to falken fk452 or yokohama s-drives.. my only question is should i go with 225/45 or 235/40... im leaning towards the ladder. thoughts on size and tire choice??

27rocks
05-28-2011, 08:47 PM
Personally i think the 235's would look money on the 8's. They should fit the wheel just perfect.

SHG_EasyE
05-29-2011, 08:45 AM
you guys are right.. im over the whole stretched malarkey. dunno wtf i was thinking.. much rather be able to handle. i sold the 215's i had today and got most of my money back for them.

so i've decided to go with 17x8 +35, and i've narrowed tire choices in my budget down to falken fk452 or yokohama s-drives.. my only question is should i go with 225/45 or 235/40... im leaning towards the ladder. thoughts on size and tire choice??

Sweet dude! Another one has seen the light haha.

What I would do to choose between 225 and 235 is to compare the actual width of the wheel which is 9". (wheel sizes are represented by the measurement between beads and doesnt include the outer lips) and then compare that to the overall width of the tire which you can find on tire rack. Then you will see if the 235 will bulge a little, or is the 225 will stretch a little and decide which look you will prefer. If youre just doing street driving or the occasional auto x 225 would be fine. You will also get a little better gas mileage with the slightly skinnier tire. Hope this helps!

SHG_EasyE
05-29-2011, 09:11 AM
17x9 + 35 245-40-17 and 17x7.5 +48 225-45-17

http://i159.photobucket.com/albums/t131/sohonda_garage/P1090594.jpg

situner28
05-30-2011, 08:05 PM
Looking at getting a set of work s1's and I was looking into getting a 17x8.5 +40. What work should I look at doing before I order them and what size tires should I run?

jed_averill
05-30-2011, 11:52 PM
Planning to get new tires on my 02 stockies. I'm gonna be lowered with racelands so what tire specs should I run?

PatrickJamesYu
05-31-2011, 01:49 AM
The 521's style would look a lot better in a 17, but at least they aren't the whored-out 002's :mangel:

I thought you were over the crazy camber thing?


Planning to get new tires on my 02 stockies. I'm gonna be lowered with racelands so what tire specs should I run?

205/55
I personally think 205/50 looks better on the wheel it self, but I think it ends up looking and being too undersized for the ep.

My stocks are 205/55 right

PatrickJamesYu
05-31-2011, 01:51 AM
The 521's style would look a lot better in a 17, but at least they aren't the whored-out 002's :mangel:

I thought you were over the crazy camber thing?


Looking at getting a set of work s1's and I was looking into getting a 17x8.5 +40. What work should I look at doing before I order them and what size tires should I run?

What kind of look are you looking for?
Look into what your suspension is, or will be
Roll your fenders just incase
and either 215/45 or 205/45 for stretch
or 235/40 for beef.

nmysiismyn
05-31-2011, 02:07 AM
205/55
I personally think 205/50 looks better on the wheel it self, but I think it ends up looking and being too undersized for the ep.

My stocks are 205/55 right

Stocks sizes:
195/60/15
205/50/16
215/40/17

SamuraiSi
05-31-2011, 07:02 AM
What's the width on the 16" stock wheels?

Maybe there should be a sticky with all stock wheel and rubber sizes.

I'm running 16x7 wheels with 215/40/16 and I think it might be too beefy cause I have some crazy noise coming from the back. My best attempt to put it into words is "whowing".


Stocks sizes:
195/60/15
205/50/16
215/40/17

jed_averill
05-31-2011, 07:58 AM
205/55
I personally think 205/50 looks better on the wheel it self, but I think it ends up looking and being too undersized for the ep.

My stocks are 205/55 right

Can you take a picture? I forgot how yours looked like almost a year ago.

PatrickJamesYu
06-01-2011, 10:02 PM
The 521's style would look a lot better in a 17, but at least they aren't the whored-out 002's :mangel:

I thought you were over the crazy camber thing?


Can you take a picture? I forgot how yours looked like almost a year ago.

text me so I can send it via cellphone pic

nmysiismyn
06-02-2011, 03:44 PM
What's the width on the 16" stock wheels?

Maybe there should be a sticky with all stock wheel and rubber sizes.

I'm running 16x7 wheels with 215/40/16 and I think it might be too beefy cause I have some crazy noise coming from the back. My best attempt to put it into words is "whowing".

It's natural for there to be more road-noise as you up the tire width as there's more contact/footprint to the road, but it shouldn't be that noticeable over stock. I'm willing to bet that it's the model of your tire.

What kind do you have?

Here's the stocks tire sizes / rim widths, according to year/model:

02-03: 195/60/15"x6.5"
04-05: 205/50/16"x6.5"
Type-R: 215/40/17"x7"

(please correct me if I'm wrong about the Type-R's specs)

I think the offset is +43 for all years / models.

chuck83
06-02-2011, 09:04 PM
i think stock tire size on an 04-05 is 205/55/16, and the offset on all of them is +45

usedep3
06-02-2011, 09:44 PM
type r is 205/40/17 iirc

SamuraiSi
06-03-2011, 06:54 AM
I'm running Nitto NT450 215/40/16 on Rota Circuit 8s 16x7 +40

Also the rear tires are wearing weird on the inside, I took a quick pic with my phone, you can kinda tell what I'm talking about. I do have a camber kit and I had an aligment done with camber adjustment.

http://farm4.static.flickr.com/3647/5793105247_91ef28d6a0.jpg


It's natural for there to be more road-noise as you up the tire width as there's more contact/footprint to the road, but it shouldn't be that noticeable over stock. I'm willing to bet that it's the model of your tire.

What kind do you have?

Here's the stocks tire sizes / rim widths, according to year/model:

02-03: 195/60/15"x6.5"
04-05: 205/50/16"x6.5"
Type-R: 215/40/17"x7"

(please correct me if I'm wrong about the Type-R's specs)

I think the offset is +43 for all years / models.

Danielsle
06-03-2011, 07:51 AM
Im on stock rims and tires right now. But I picked up some Base RSX rims, and just got them back powder coated white. I was wondering if I could pull off some wider tires? I was thinking 245/40/16? I dont know the specs on the base rsx rims though, new to whole rims and stance thing! :D

SHG_EasyE
06-03-2011, 11:35 AM
I'm running Nitto NT450 215/40/16 on Rota Circuit 8s 16x7 +40

Also the rear tires are wearing weird on the inside, I took a quick pic with my phone, you can kinda tell what I'm talking about. I do have a camber kit and I had an aligment done with camber adjustment.



EP3's tend to wear this way in the rear when theyre lowered and arent stiffly sprung. Reason is the suspension angles change drastically when the suspension compresses and the rear wheels gain a ton of neg camber and toe. What are your alignment specs now?


Im on stock rims and tires right now. But I picked up some Base RSX rims, and just got them back powder coated white. I was wondering if I could pull off some wider tires? I was thinking 245/40/16? I dont know the specs on the base rsx rims though, new to whole rims and stance thing! :D

They are 16x6.5, in which case I wouldnt go larger than a 225. You would be best off with a 215 though.

mitchlikesbikes
06-03-2011, 12:42 PM
Im on stock rims and tires right now. But I picked up some Base RSX rims, and just got them back powder coated white. I was wondering if I could pull off some wider tires? I was thinking 245/40/16? I dont know the specs on the base rsx rims though, new to whole rims and stance thing! :D

i'm on base rsx wheels as well. they're the same specs as stock so running stock spec tires would be fine. i think i might go with 215s on my next set like SHG_EasyE suggested though

ep3jd
06-03-2011, 12:46 PM
I was hoping I could put 225/45 on my stock 04/05 wheels. Hmm

nmysiismyn
06-03-2011, 02:14 PM
I'm running Nitto NT450 215/40/16 on Rota Circuit 8s 16x7 +40

Also the rear tires are wearing weird on the inside, I took a quick pic with my phone, you can kinda tell what I'm talking about. I do have a camber kit and I had an aligment done with camber adjustment.

http://farm4.static.flickr.com/3647/5793105247_91ef28d6a0.jpg

I understand that it's hard to see things clearly in a photo, but that looks beyond the -0.5° stock camber setting. You could probably use a little less, if you have the clearance.

SHG, is right about the softer springs/struts- especially if you're driving on crappy/bouncy roads all the time.

Feel your tire's tread. Is there feathering going on? If so, your toe/in-out is too much.

SHG_EasyE
06-03-2011, 02:46 PM
I was hoping I could put 225/45 on my stock 04/05 wheels. Hmm

You can do it, it all depends on the tire. If its got a stiff ass sidewall the fact that its a bit too wide for the rim will be negated to a certain extent.

We run 225/45/15 Hoosiers on our FC RX7's in ITS class on the stock 15x6.5 BBS per rules with no issues

http://farm4.static.flickr.com/3377/3525825154_2a6b9dbbd2.jpg