PDA

View Full Version : 05-06 TypeS Rear Sway Bar vs ITR?



kai-wun
03-23-2010, 10:34 AM
Hey,

Kinda want a rear sway but don't want to spend money on an aftermarket one.

Thinkin about this one:

JDM Integra DC5 Type Rear Sway Bar 22mm w/Bushings (http://yhst-1408381693991.stores.yahoo.net/jdmindc5tyrs.html)

But shipping to the great white north is an extra $50.

I'm also looking for an 05-06 Type-S rear sway locally, but it wont come with bushings. Where can I get these bushings? It's also 21mm vs 22mm on the ITR ones. Hm... decisions decisions.

Endlinks are highly recommended as well, correct? The Corsport v2 ones?

Sigh ... it's adding up. RSB/endlinks, shifter bushings, ESMM, camber kit (with zzyzx's agressive DD alignment)... hopefully this will make Alice happier on her feet ^_^

talonXracer
03-23-2010, 11:31 AM
You can get the bushings at any acura stealership or online parts site.

I have the 05' typeS rear sway on now, it took the place of the overpriced, overrated jdm piece.

chiwhitesi
03-23-2010, 11:39 AM
i paid like $80 shipped for my ITR say BNIB from someone on k20a.org i havnt installed it yet. Energy suspension bushings are like $20. and i think im going to got with the OEM endlinks.

talonXracer
03-23-2010, 11:52 AM
71$ for the sway and 5.04$ for the bushings from Carland Acura
http://www.acuracarland.com/j/i/31665/AcuraPartsOnline.html

Their prices have climbed since last fall considerably.

kai-wun
03-23-2010, 11:59 AM
Thanks. Unfortunately Acura Carland doesn't ship north of the border. I'm hoping to score a 06 Type-S bar for reasonable coin locally.

I can just waltz into an Acura Stealership (part no in the states and Canuck-land the same) and pick up those bushings?? Can someone link me to the part numbers? I can't seem to find it :(

Cheers!

LLH
03-23-2010, 12:12 PM
Park oem honda/acura ships to norway so ill bet the ship to you to :)

talonXracer
03-23-2010, 01:29 PM
sway bar 52300-S6M-A61

bushings 52306-S6M-A62

kai-wun
03-23-2010, 02:37 PM
Thanks!

*groan... shipping's $45 to Canada... makes this deal cold cold cold lol.

kai-wun
03-24-2010, 07:35 AM
Should I switch to the 15.9mm EM2 front sway? What size is our front?

If so, do I only need the bar and bushings? Since it's a smaller bar, I can reuse stock holders/endlinks?

51300-S5D-A02 SPRING, FR. STABILIZER
51308-S5A-000 HOLDER, FR. STABILIZER
51320-S5A-003 LINK, R. FR. STABILIZER
51321-S5A-003 LINK, L. FR. STABILIZER
51306-S5D-801 BUSH, STABILIZER HOLDER

kai-wun
03-24-2010, 06:06 PM
//edit: dumb question, deleted lawl.