PDA

View Full Version : Harness help!!



Mugen_Power
04-12-2010, 04:51 PM
anyone know which harness i have to buy from SUVlights.com to convert 02-03 to 04-05 EDM projectors?

i got the EDM projectors.
thanks

macadeezy
04-13-2010, 09:43 AM
http://www.suvlights.com/product_info.php?products_id=215
http://suvlights.com/product_info.php?products_id=112 (Select 9005/HB3 and 9006/HB4 (Both in One) )
Ordered their harness a few months ago when I got my EDM Projectors. Great product well worth it! You can also call these guys if you run into any issues and they will walk you through anything you need help with. Great customer service! (Unlike Corsport)

Mugen_Power
04-13-2010, 04:46 PM
^ cool thanks, so which one do i Buy? since you gave me 2 links :P

ep3steez
04-13-2010, 07:18 PM
I'm looking to do the same thing. bump on that question. do we need to order headlight sockets?
and where is a good place to buy a legit set of something like this
http://www.ilovebodykits.com/product/54654/02_05_Honda_Civic_Si_EP3_Projector_Headlights_Blac k_w_HID_Kit_Co.html

BeaterEP
04-14-2010, 08:09 AM
http://www.suvlights.com/product_info.php?products_id=215
http://suvlights.com/product_info.php?products_id=112 (Select 9005/HB3 and 9006/HB4 (Both in One) )
Ordered their harness a few months ago when I got my EDM Projectors. Great product well worth it! You can also call these guys if you run into any issues and they will walk you through anything you need help with. Great customer service! (Unlike Corsport)

So with the 9005/HB3 and 9006/HB4 harness, that allows you to run either the standard 9005/9006 two-bulb setup, or switch to the HID setup? Looking at just switching out my OEM 02/03 headlights for some OEM 04/05s, and now I'm trying to figure out the harness.
Sorry about the threadjack! :mbiggrin:

macadeezy
04-15-2010, 08:09 PM
So with the 9005/HB3 and 9006/HB4 harness, that allows you to run either the standard 9005/9006 two-bulb setup, or switch to the HID setup? Looking at just switching out my OEM 02/03 headlights for some OEM 04/05s, and now I'm trying to figure out the harness.
Sorry about the threadjack! :mbiggrin:
This set up will allow you to convert 02-03 headlights to 04-05 EDM or Depo headlights to HID low and 9005 high.

Mugen_Power
04-15-2010, 10:09 PM
so do i only need to buy

http://suvlights.com/product_info.php?products_id=112 (Select 9005/HB3 and 9006/HB4 (Both in One) )

what about the other link?

macadeezy
04-16-2010, 01:04 PM
The other link is for the conversion from H1 (new EDM low beam bulb) to H4 female (factory connection now). You will only need one not two. The new harness will connect to your battery terminals for the power source, and the new male H1 plug will connect to the drivers side factory female H4. The harness will only connect to the drivers side factory female plug, and your battery terminals. Because the power source will now be provided from the battery directly, one connection to the drivers side will only be required to illuminate both driver and passenger side lights. However, if you wish to have your low beams stay illuminated while you activate your high beams, you will also need to buy a diode from a local electronics store. Otherwise, the low beams will turn off while your high beams illuminate and then come back on after you switch back to low. Its a very easy install too. I was told by Suvlights this would not happen but it did anyway. Very easy to fix with a cheap 3 dollar diode.

Mugen_Power
04-16-2010, 10:06 PM
^ i see, so i have to buy the H4 Female? kind of confusing since i'm not a wiring kind of guy.

since i have the 02-03 oem headlights. To convert to 04-05 EDM projector which do i need?

thanks.