PDA

View Full Version : Getting some JDM bumpers, skirts, lips so Which parts will I need?



MadLorEP3
04-12-2010, 08:08 PM
UPDATED 5/1/10

I have an 04 ep3 and I am getting the 04-05 JDM front bumper and lip, JDM sideskirts, JDM rear bumper and lip.

EDIT: JUST GOT MY SKIRTS ON THE CAR SO I KNOW EXACTLY WHAT PARTS ARE NEEDED FOR AN OEM INSTALL

For those of you that already have the items above can you please HELP ME OUT.
I need to know WHICH & HOW MUCH OF EACH brackets, clips, screws, nuts etc will I need for installation.
I no longer have any of my oem bumpers, skirts and liners as well thus I do not have any oem bolts, clip, brackets, washers etc.

So far I have already ordered the bumper clips from clubrsx but I still need alot more parts to make everything oem again.

04-05 JDM FRONT & REAR BUMPERS AND LIPS
I THINK THAT I NEED PARTS 35 (6), 27 (6), 29 (2), 25 (2), 34 (6), 28 (6), 33 (4) 15 (2) 37 (6),
26 (2) Total=$130.54 + shipping

http://i730.photobucket.com/albums/ww304/MadLorGLK/jdmbumperpartslist.png



04-05 USDM FRONT & REAR BUMPERS AND LIPS
I ALAREADY KNOW WHICH PARTS I NEED FROM HERE, ALOT but thats just me
http://i730.photobucket.com/albums/ww304/MadLorGLK/USDMFRONTBUMPERPARTSLIST.png


02-03 JDM BUMPERS & LIP
[/COLOR][/SIZE][/B]
http://i730.photobucket.com/albums/ww304/MadLorGLK/02-03JDMBUMPERPARTS.jpg


02-05 JDM SIDESKIRTS
I NOW KNOW THAT I NEED parts 2 (4), 15 (8), 19 (4), 17 (8) or another option would be to install an additional part number 2 on each side thus the new total parts needed would be 2 (6), 15 (12), 17 (12) 19 (6).

For the follwing parts 20 (2) & 22 (2), you DON'T need them because there are no holes corresponding to their location on the usdm ep3.INSTEAD YOU NEED part number 32 (6)
http://i730.photobucket.com/albums/ww304/MadLorGLK/sideskirts.png


04-05 USDM SKIRTS

I would need PARTS 31 (18) and 32 (6) for the JDM skirts.
http://i730.photobucket.com/albums/ww304/MadLorGLK/04siparts.png


I already know that I need a JDM front rebar
I know that there has to be some type of modification of the rear oem rebar and the rear jdm rebar but if someone can elaborate on how to mod this then that would be great.

I also already know that I need an 04-05 JDM grill, along with the 04-05 JDM top trim piece

My main question now is whether the locations of the 9 holes on the side of the ep will match up with the locations of the 9 clips on the jdm sideskirts.
EDIT: YES, THE HOLES LINES ON THE USDM 04 EP LINE UP PERFECTLY WITH THE HOLES ON THE JDM SKIRTS.

EDIT: YOU NEED usdm parts 31 (18) and 32 (6) for the JDM skirts!!! Part 32 will be used on the fins, they have a sticky backing on them. Part 32 fits 2 of the holes on the fins but you have to make the third pair of part 32 a bit thinner so it would fit the hole on the JDM fin

PLEASE HELP A BROTHA OUT...ESPECIALLY THOSE BELONGING TO THE FACELIFT CREW
WHERE YOU GUYS AT.....


EDIT: SEEMS LIKE ALOT OF THIS STUFF HAS BEEN COVERED B4
THERES INFO ALL OVER THE PLACE ON THE HATCH
IT WOULD BE NICE TO HAVE IT ALL IN ONE PLACE
http://www.ephatch.com/forum/showthread.php?t=44454
http://www.ephatch.com/forum/showthr...ght=sideskirts


edit: ITS GOING TO COST ME ABOUT $300 TO GET ALL THESE PARTS WTF

RedSiBaron
04-12-2010, 08:45 PM
PM me to remind me, i will tell you absolutely everything you need if you would like to do an OEM install...i say this because i have been drinking and cannot do this right now but a PM will remind me and i am more than glad to help you out...i've done an absolutely 100% oem install on my 02-03 type r exterior and can point you in the right direction

MadLorEP3
04-12-2010, 09:39 PM
PM me to remind me, i will tell you absolutely everything you need if you would like to do an OEM install...i say this because i have been drinking and cannot do this right now but a PM will remind me and i am more than glad to help you out...i've done an absolutely 100% oem install on my 02-03 type r exterior and can point you in the right direction

Thank you kind sir
I will definitely send you a pm tomorrow when you are sober
Have fun in your drunkeness, its been awhile since for me....

username011
04-12-2010, 10:00 PM
I went to my Honda dealer today and they said with the skirts you'll need 44 clips..22 on each side and they run $6 something from the dealer..

MadLorEP3
04-12-2010, 10:13 PM
Are we talking about using the same clips for the 04 usdm sideskirts as the ctr sideskirts

RedSiBaron
04-13-2010, 02:04 PM
first question, are you getting your side skirts BNIB? if you are they will have pop in clips on them...

your best bet for ordering the pop in clips is from www.hondaautomotiveparts.com or japanparts.com (if you are doing an OEM install you will need to be ordering from japanparts.com anyway)

for the sideskirts you will need to order from japanparts.com 2-3 underbody clips per side, each has a pop in fastener and 2 screw in fasteners that attach it to the sideskirt...the sideskirt will have 2 pre drilled locations each for the underbody clips, but there is a place on the skirt you can drill two additional holes and add a 3rd underbody clip per side

for the rear bumper there will be pop in clips that attach the lip to the bumper...the front lip will not have any clips instead it will use the oem screws and bolts that hold the fender liner and underbody covers to the stock bumpers currently

MadLorEP3
04-13-2010, 02:27 PM
first question, are you getting your side skirts BNIB? if you are they will have pop in clips on them...

your best bet for ordering the pop in clips is from www.hondaautomotiveparts.com or japanparts.com (if you are doing an OEM install you will need to be ordering from japanparts.com anyway)

for the sideskirts you will need to order from japanparts.com 2-3 underbody clips per side, each has a pop in fastener and 2 screw in fasteners that attach it to the sideskirt...the sideskirt will have 2 pre drilled locations each for the underbody clips, but there is a place on the skirt you can drill two additional holes and add a 3rd underbody clip per side

for the rear bumper there will be pop in clips that attach the lip to the bumper...the front lip will not have any clips instead it will use the oem screws and bolts that hold the fender liner and underbody covers to the stock bumpers currently

the skirts are used and abused
and I acutally got the pics above from japan parts

so the "pop in clips" that you are telling me to get are the clips for the usdm sideskirts right not the clips for the jdm skirts
so these would be parts 31 and 32 in the 3rd picture above.
honda lists that I would need eighteen of part 31 and 4 of part 32 for the usdm sideskrts
but is this the same abount I would need for the jdm skirts?

and the underbody clips that you are referring to are the ones for the jdm skirts
so I will get 3 per side for a total of 6 of these clips which would be number 2 in the second pic.

Is the pop in fastener and screw in fasteners numbers 15 and 19 in the second pic? If so, how many will I need of each?
Any idea if I will need part 17 in the second pic as well?

REAR BUMPER TO LIP:
So how many of these pop in clips will I need, I dont have the bumper and lip yet so I cannot count for myself
EDIT: So after looking at the picture one above it seems that I will need to also use 4 of part 35 and 4 of part 27 for the rear lip as well.

FRONT BUMPER TO LIP
How sure are you about the 04-05 front bumper and lip not needing any clips?
Look at the first picture in the first post,thats an 04-05 front lip to an 04-05 front bumper.
It looks like I would definitely need parts number 35 and 27 but I am unsure of how many I would need
Maybe 4 of each what do you think?
What about parts 34 in the same pic, not sure if I need this or how many I would need?
And parts 25 and 29?


I dont have fender liners so I am not sure which parts are used for these.
Im not sure if what Im calling clips are the same thing that you are referring to as clips.

MadLorEP3
04-13-2010, 08:34 PM
Bump for some answers...thanks

FIRST POST HAVE BEEN REVISED

charles
04-13-2010, 08:52 PM
dont forget the rebars. The front will fit, but the rear will need some modding

MadLorEP3
04-14-2010, 01:41 AM
dont forget the rebars. The front will fit, but the rear will need some modding

i got the fronts on the car already

and I was planning on getting the rears, can you elaborate on what type of modding is necessary for the rear


I found the answers for most of questions already but I still dont know if the USDM skirts' clips (parts 31 and 32 in the 4th picture above) can be used with the JDM skirts

If anyone can provide me with a picture of a jdm sideskirt showing the bottom part and also the inside part of it that would be great
EDIT: found this here http://www.ephatch.com/forum/showthread.php?52242-2005-EP3-JDM-to-USDM-Side-Skirt-Install&highlight=sideskirts

Attached is the 8 step process, with Images, to Install JDM Side Skirts to a 2005 Honda Civic SI Hatchback (EP3). You can get the Velcro at any Radio Shack store.

http://i458.photobucket.com/albums/qq301/f42000mcs/EP3JDMtoUSDMSideSkirtInstallImage01.jpg
http://i458.photobucket.com/albums/qq301/f42000mcs/EP3JDMtoUSDMSideSkirtInstallImage02.jpg
http://i458.photobucket.com/albums/qq301/f42000mcs/EP3JDMtoUSDMSideSkirtInstallImage03.jpg
http://i458.photobucket.com/albums/qq301/f42000mcs/EP3JDMtoUSDMSideSkirtInstallImage04.jpg
http://i458.photobucket.com/albums/qq301/f42000mcs/EP3JDMtoUSDMSideSkirtInstallImage05.jpg
http://i458.photobucket.com/albums/qq301/f42000mcs/EP3JDMtoUSDMSideSkirtInstallImage06.jpg
http://i458.photobucket.com/albums/qq301/f42000mcs/EP3JDMtoUSDMSideSkirtInstallImag-1.jpg
http://i458.photobucket.com/albums/qq301/f42000mcs/EP3JDMtoUSDMSideSkirtInstallImage08.jpg

MadLorEP3
04-14-2010, 02:34 PM
help...

mr-alternative
04-14-2010, 02:42 PM
I have an 04 ep3 and I am getting the 04-05 JDM front bumper and lip, JDM sideskirts, JDM rear bumper and lip.

For those of you that already have the items above can you please HELP ME OUT.
I need to know WHICH & HOW MUCH OF EACH brackets, clips, screws, nuts etc will I need for installation.
I no longer have any of my oem bumpers, skirts and liners as well thus I do not have any oem bolts, clip, brackets, washers etc.

So far I have already ordered the bumper clips from clubrsx but I still need alot more parts to make everything oem again.

04-05 JDM FRONT & REAR BUMPERS AND LIPS
I THINK THAT I NEED PARTS 35 (8), 27 (8), 29 (2), 25 (2), 34 (6), 28 (4), 33 (2) 15 (2) 37 (?), 26 (?)
CAN ANYONE CONFIRM THIS?
http://i730.photobucket.com/albums/ww304/MadLorGLK/jdmbumperpartslist.png



04-05 USDM FRONT & REAR BUMPERS AND LIPS
I ALAREADY KNOW WHICH PARTS I NEED FROM HERE, ALOT
http://i730.photobucket.com/albums/ww304/MadLorGLK/USDMFRONTBUMPERPARTSLIST.png

02-03 JDM BUMPERS & LIP.
IS THERE A DIFFERENCE BTW 02-03 N 04-05 REAR BUMPER N LIPS?
I DONT THINK SO BUT I ASK BECAUSE THERE ARE 2 EXTRA PARTS 31 & 38 THAT ARE LISTED IN THE BELOW THAT ARE NOT
LISTED IN THE 04-05 JDM BUMPERS & LIPS DIAGRAM
http://i730.photobucket.com/albums/ww304/MadLorGLK/02-03JDMBUMPERPARTS.jpg


02-05 JDM SIDESKIRTS
I NOW KNOW THAT I NEED parts 2 (4), 15 (8), 19 (4), 17 (8) or another option would be to install an additional part number 2 on each side thus the new total parts needed would be 2 (6), 15 (12), 17 (12) 19 (6).

CAN ANYONE CONFIRM IF I WOULD NEED PARTS 20, 21, 22? I DONT THINK I NEED THEM BECAUSE THERE ARE NO HOLES IN THE BODY HIGH ENOUGH FOR THESE TO GO INTO BUT JUST WANNA CLARIFY.
http://i730.photobucket.com/albums/ww304/MadLorGLK/sideskirts.png


[COLOR="blue"]04-05 USDM SKIRTS
WILL PARTS 31 & 32 ALSO WORK FOR JDM SKIRTS?
I would need PARTS 31 (18) and 32 (4) for the usdm skirts, SO WILL I NEED THE SAME QUANTITY FOR MY JDM SKRTS
IT TURNS OUT THAT part 32 is what people are calling sticky clips and they use this to install usdm skirts onto 02-03 ep3's
http://i730.photobucket.com/albums/ww304/MadLorGLK/04siparts.png


PLEASE HELP A BROTHA OUT...ESPECIALLY THOSE BELONGING TO THE FACELIFT CREW
WHERE YOU GUYS AT.....


EDIT: SEEMS LIKE ALOT OF THIS STUFF HAS BEEN COVERED B4
THERES INFO ALL OVER THE PLACE ON THE HATCH
IT WOULD BE NICE TO HAVE IT ALL IN ONE PLACE
http://www.ephatch.com/forum/showthread.php?t=44454
http://www.ephatch.com/forum/showthr...ght=sideskirts

to 04-05 jdm bumpers:

4pcs of #33

if its the screw and clip which i thin you need 4 pcs. of 26 and 37

MadLorEP3
04-14-2010, 03:42 PM
to 04-05 jdm bumpers:

4pcs of #33

if its the screw and clip which i thin you need 4 pcs. of 26 and 37

thanks Andre
I updated the first post
so if I need 4 pieces of 33 then will I need 6 pieces of 28?

MadLorEP3
04-15-2010, 02:29 AM
ok so i pretty much know which parts I need to get for the jdm front and rear bumpers and lip to be installed correctly

But I am still unsure about the parts I would need for the skirts. Especially need to know if the holes on the 04 ep3 match up with the holes for the jdm ctr skirts.

bump for some answers

MadLorEP3
04-16-2010, 04:29 PM
Damn its gonna cost about $400 to get all these brackets and screws and clips
what the fuck

ttttrigg3r
04-16-2010, 05:52 PM
lol. screw jdm. USDM! I really want to see pics when you get all this finished. Good luck

MadLorEP3
04-17-2010, 12:17 AM
Me to...

Distance
04-17-2010, 06:12 AM
Damn its gonna cost about $400 to get all these brackets and screws and clips
what the fuck

gotta pay to play man. especially if you don't wanna do a half ass install.

MadLorEP3
04-17-2010, 07:27 AM
gotta pay to play man. especially if you don't wanna do a half ass install.

haha true that

trust me bro I've been paying plenty since I started my build last summer

MadLorEP3
04-21-2010, 04:29 AM
Bump for an answer
First Post updated

1. Does anyone out there know if the 10 holes on each side of a jdm skirt match up to the 9 holes on the lower side of the 04-05 ep3?
2. Should I get the clip for the usdm sideskirts which is part 31 (18) or the clip for the jdm sideskirts part 21 (20)

04-05 USDM SKIRTS
http://i730.photobucket.com/albums/ww304/MadLorGLK/04siparts.png

02-05 JDM SIDESKIRTS
http://i730.photobucket.com/albums/ww304/MadLorGLK/sideskirts.png

mr-alternative
04-21-2010, 02:19 PM
thanks Andre
I updated the first post
so if I need 4 pieces of 33 then will I need 6 pieces of 28?

yes because you use 6 pcs of 28, 4 of 33 and 2 of 34

BaLisTek
04-21-2010, 02:27 PM
dude, the ctr skirts pop into the predrilled holes for the usdm skirts. I feel bad because I had a baggie full of extra clips I got from a friend as a favor. Its been well over a year and those are long gone lost . I'd get the clips for the sideskirts and then find alternatives for all the other assembly parts as needed. 400 for something you will never see is retarded. Just think, thats money you can use to pick up my carpet when the time comes =)

but seriously, I hope cheaper alternatives arise for your situation

MadLorEP3
04-21-2010, 03:07 PM
dude, the ctr skirts pop into the predrilled holes for the usdm skirts. I feel bad because I had a baggie full of extra clips I got from a friend as a favor. Its been well over a year and those are long gone lost . I'd get the clips for the sideskirts and then find alternatives for all the other assembly parts as needed. 400 for something you will never see is retarded. Just think, thats money you can use to pick up my carpet when the time comes =)

but seriously, I hope cheaper alternatives arise for your situation

Just dropped $342 just on screws, brackets, and shit...LOL
your absolutely right though
its freaking retarded

not including the $127 spent on usdm oem hardware

and its not first time as well
these little oem clips and brackets aint no joke
way too much money for these parts


that carpet gonna look sweet bro

EDIT: for some reason the order didnt go thru so I just had to repay and what do you know price went up even more
from $342 to $348

Also forgot to mention actually only about $300 of the total amount was for the screws etc, $48 was for something else

EP_EJAY
04-21-2010, 06:18 PM
didnt someone post a link before the site crash on where to purchase those clips for dirt cheap? it wasnt OEM but it was almost identical..

Go_ep3
04-21-2010, 07:39 PM
wow. thats alot for screws an clips! aslo check this place out...http://www.clipsandfasteners.com/Default.asp

MadLorEP3
05-01-2010, 04:28 PM
UPDATED FIRST PAGE
which tells you all the parts you need to install jdm sideskirts onto an 04 ep

ep-unit
05-06-2010, 02:15 AM
dont forget the rebars. The front will fit, but the rear will need some modding

Did you mean our USDM oem front rebar fits with the JDM Front bumper?

Kerby
05-06-2010, 07:19 AM
where you get the sideskirts son?
they new, used, come prepainted?

MadLorEP3
05-06-2010, 01:59 PM
i got some new skirts painted black from wilzepash

i will be repainting them to match my car though

hit him up

EP_EJAY
05-06-2010, 03:31 PM
PM'd you madlorgik

MadLorEP3
05-06-2010, 07:00 PM
PM'd you madlorgik

replied

Kerby
06-10-2010, 06:08 AM
did you find out how the rear rebar is suppose to be modified to work with the jdm bumper?

usedep3
06-10-2010, 09:01 AM
the usdm rebar has to be cut substantially to get it to fit. the fitment of SSR's new modified USDM rear rebar is excellent. the quality is far better than their previous version.

Just FYI, the only thing the jdm rebar is good for is its curvature. it's too long so it needs to be cut as well

firmk20
03-22-2011, 09:49 PM
another good thread.

Jukka
03-23-2011, 10:10 AM
did you find out how the rear rebar is suppose to be modified to work with the jdm bumper?

^^ this. There used to be a good how-to on here, and a way to make your own rebar using carbon steel, but they got lost with the crash of 2010. Its the last peice of my JDM puzzel and I'd rather modify or make one on the cheap than spend $150 + shipping there and shipping back for an SSR one.

6spd_EP3
04-11-2011, 06:48 PM
I have '03 ep3 & just, today, received my 02-03 ukdm CTR bumpers & lips & skirts. DHL FTW picked up friday in UK delivered today here in NY. Problems are, one of my skirts is missing the lower arm bracket (Part #2 in skirt diagram is not available in the USA?) & I am missing the four front spacers for the front lip (each has an individual part number lol) also not available in the US? does anyone know where I can get these? I am missing a ton of nuts & bolts & clips but I have the part #'s for them. edit: oh yeah, no rebars! should I modify myself, buy SSR mod, or buy oem?

do I drill for the sideskirts or not? :nervous: ANSWER - don't drill just use qty 24x oem sticky clips (@ $5 each)

I may be placing an order with a Honda Dealership in the UK - if anyone wants something let me know. I will be posting actual OE Honda part #'s for everything tomorrow. edit - its tomorrow

02-03 Bumper Diagram - rear lip
#32 90141-s5t-g01 x8 - OK U.S. Honda part #
#35 90303-s5t-g00 x4 - NOT U.S. Honda Part # (working on usdm counterpart)
#31 90126-sr4-000 x8 - OK U.S. Honda part #
#38 90345-s04-000 x8 - OK U.S. Honda part #
#30 90126-sa7-000 x2 - OK U.S. Honda part #
#40 90682-sb0-003 x2 - OK U.S. Honda part #

02-03 Bumper Diagram - Front Bumper
#39 90501-sm4-003 x4 - OK U.S. Honda part #
#4 71111-s6a-e01 x4 - NOT U.S. Honda Part #
#37 90323-se0-000 x4 - OK U.S. Honda part #
#29 90111-sm4-003 x2 - OK U.S. Honda part #
#36 90305-sh3-000 x4 - OK U.S. Honda part #

02-03 Bumper Diagram - Front Lip
#5 71173-s5t-g01 x1 - NOT U.S. Honda Part #
#6 71174-s5t-g01 x1 - NOT U.S. Honda Part #
#11 71113-s5t-g01 x1 - NOT U.S. Honda Part #
#12 71114-s5t-g01 x1 - NOT U.S. Honda Part #
#48 93913-15320 x4 NOT US Honda. OK U.S. Acura part #
#32 90141-s5t-g01 (see above for qty) - OK U.S. Honda part #

Side Skirt
#2 71804-s5a-r00 x4 - - NOT U.S. Honda Part # (Lower Arm bracket for skirts)
#21 90305-sm4-000 x8 - OK U.S. Honda part #
#23 91501-s5a-003 x4 - OK U.S. Honda part #
#14 74475-s5t-g00 x2 - NOT US part number
#18 90104-sr2-003 x8 - OK U.S. Honda part #
#19 90109-se0-003 x4 - OK U.S. Honda part #
#24 91503-s2x-003 x2 - NOT US part number - use 91503-sz3-003 U.S. Honda part number
#25 91504-sp1-003 x20 - OK U.S. Honda part #
#26 91513-s47-000 x2 *STICKY CLIPS*- Not U.S. part number - use 91513-s5s-e01 U.S. Honda part #

Kerby
04-12-2011, 04:16 PM
to the guys who's car came with the HFP side skirts and switched to JDM...

1.) Are there holes on the side of the car for pins where the end wings are?
2.) If there are, do they line up with the JDM pins?

thanks,

6spd_EP3
04-12-2011, 05:59 PM
I don't think there are holes under the upper wing section of the hfp sides. that would mean dealers drilling holes in the sides of cars. I think the hfp kit comes with "sticky clips" I believe I have the part # & will know for sure tomorrow.

If it does have any holes they will line up with the jdm skirts

usedep3
04-12-2011, 07:37 PM
to the guys who's car came with the HFP side skirts and switched to JDM...

1.) Are there holes on the side of the car for pins where the end wings are?
2.) If there are, do they line up with the JDM pins?

thanks,

the hfp sides come with more or less 2 different sets of brackets. one set of brackets hold the bottom of the hfp skirt to the pinch weld under the car. the other set of brackets use double sided take to attach the skirt to the side of the car. none of the hfp sideskirt hardware reuses the usdm oem holes for mounting purposes.

when you mount authentic ctr skirts to the car, you will reuse the all the mounting holes that were once occupied by the usdm oem 04/05 skirt. all the holes, i think its 2 under the car and 7 or 9 on the rocker panel on each side lines up perfectly with the ctr skirt. you will also need a about 2 or 3 sticky slips per side skirt for the remaining mounting points on the 'hump' of the skirt. if you have an 04/05 and you have the ctr skirt in front of you, it'll make more sense.

6spd_EP3
04-12-2011, 08:27 PM
I have to figure out the US part # for that pinch weld bracket. the ukdm part # is 71804-s5a-r00 but doesn't work in our part database

EDIT - got the the OEM sticky clip today!!! 91513-s5s-e01

looks like I will be placing an order with Ling's Honda in Great Britain http://www.hondaoriginalparts.com if anyone else wants to order let me know as the shipping to US is expensive

I will be ordering:
side skirt #2 71804-s5a-r00 Lower bracket to pinch weld
&
02-03 Bumper Diagram - Front Lip
#5 71173-s5t-g01 x1 lip spacer
#6 71174-s5t-g01 x1 lip spacer
#11 71113-s5t-g01 x1 lip spacer
#12 71114-s5t-g01 x1 lip spacer

Blue03Si
07-14-2014, 08:36 AM
I have to figure out the US part # for that pinch weld bracket. the ukdm part # is 71804-s5a-r00 but doesn't work in our part database

EDIT - got the the OEM sticky clip today!!! 91513-s5s-e01

looks like I will be placing an order with Ling's Honda in Great Britain http://www.hondaoriginalparts.com if anyone else wants to order let me know as the shipping to US is expensive

I will be ordering:
side skirt #2 71804-s5a-r00 Lower bracket to pinch weld
&
02-03 Bumper Diagram - Front Lip
#5 71173-s5t-g01 x1 lip spacer
#6 71174-s5t-g01 x1 lip spacer
#11 71113-s5t-g01 x1 lip spacer
#12 71114-s5t-g01 x1 lip spacer

Did you ever order those parts from Ling Honda? How much was the shipping and how long did it take to arrive? I'm actually interested in ordering the same parts for the front lip attachment as well as a few of the side skirt clips. My front lip is only held on by the screws on the side, which isn't too bad. But I noticed all the additional mounting holes in the bumper and wanted to get all the proper hardware. My side skirts are held on by sticky clips along the bottom and the two pinch weld brackets but nothing on the flat part that is near the rear fender. Only reason I really want to get all the right hardware is I plan on repainting my car and just want to make sure everything is going to be rock solid for the next 10 years, lol.