View Full Version : errrrrrrorrrrr
eP3RoyaLTy
04-16-2010, 03:15 PM
i keep getting these errors...
Engine Control Module (ECM) / Powertrain Control Module (PCM) Internal Circuit Malfunction
Manifold Absolute Pressure (MAP) Sensor Circuit Low Voltage
i moved the spark plug ground to the valve cover bolt (like in the hondata directions)
any help...???
talonXracer
04-16-2010, 03:16 PM
You have a faulty ECU probably
eP3RoyaLTy
04-17-2010, 05:48 PM
I called hondata n the Guy said it was my battery being low cuz my car sat for a while... but ur saying they ecu is no good???
You have a faulty ECU probably
4angrybadgers
04-19-2010, 12:05 PM
What is the exact DTC you're getting? If it's a P1607, sorry to say, but the ECU is screwed. Been there, done that. I doubt a low battery would cause that DTC - what are your battery and alternator voltages?
eP3RoyaLTy
04-20-2010, 01:38 AM
I'm getting both of these error codes... by being screwed you mean it cannot be repaired? Or it will cost a lot to repair? Its not worth repairing? Etc... what was ur situation/ what happened with your ecu?
4angrybadgers
04-20-2010, 06:05 AM
I'm getting both of these error codes... by being screwed you mean it cannot be repaired? Or it will cost a lot to repair? Its not worth repairing? Etc... what was ur situation/ what happened with your ecu?
I saw the descriptions you posted in your first post. It's helpful if you can post the exact error code that you are getting - it will be something like "P1607". Not all OBD2 readers will give you the correct manufacturer-specific descriptions for DTCs.
I had purchased an OEM ECU off eBay to replace my Kpro'd ECU. Had the OEM one synchronized with the immobilizer at a dealership, but it threw a P1607, which indicates an internal ECU error. I'm not sure if it is repairable, but honestly it's probably not worth it anyway - a used ECU is $150-200. I ended up getting another (working) OEM ECU when I sold Kpro to another member here.
eP3RoyaLTy
04-20-2010, 11:11 AM
P1607
P0107
Are the two codes I'm throwing...
Deadphishy
04-20-2010, 02:33 PM
Get yourself a battery charger or jumper box. If that doesn't solve the problem, check your alternator, replace the map sensor ($40.00 at autozone), if theses things in that order don't work, you might need to try a new ECU. Do you have Kpro? or is it a stock OEM ECU.
eP3RoyaLTy
04-21-2010, 12:01 AM
Ill try that thanks... I do have Kpro n its throwing those codes...
eP3RoyaLTy
04-23-2010, 03:16 PM
LOL...
I was loading the wrong map... I was using the k20a2 maps... load the high octane k20a3 map n no more codes...
You have a faulty ECU probably
agree with him
eP3RoyaLTy
04-28-2010, 11:08 AM
LOL...
I was loading the wrong map... I was using the k20a2 maps... load the high octane k20a3 map n no more codes...
Wrong map (k20a2) = error codes
Right map (k20a3) = ecu is fine / no error codes
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.