usedep3
04-21-2010, 09:55 PM
any one if this works?
i have a fog kit from my 03 and i want to install it onto my 04. i'm comparing the installation instructions for the 02/03 against the 04/05. the actual cutting of the bumper and the fog light harness seem to be the same on both 02/03 and 04/05. the difference comes with the main harness that's installed in the cabin.
differences:
-02/03 has 2 relays
-04/05 has 1 relay
-02/03 wiring for the fog switch harness uses diff color wires from 04/05
-the 12 pin connection for the 04/05 is used where as there is no 12 pin connection on the 02/03
i'm guessing that bc the headlights changed from h4 to a 9005/9006 setup that the fog light wiring changed. i can use all the connections from the 02/03 main harness but three things worry me:
1) will it work without the 12 pin connection on the main harness to the cabin fuse box?
2) i know just because i connect everything that doesnt mean it will work
3) i'm worried that i will fry something.
the wiring diagrams can be found on the last page of the following links:
02/03 install instructions (http://www.handa-accessories.com/civic/sifogs.pdf)
04/05 install instructions (http://www.handa-accessories.com/civic/04sifog.pdf)
i know that this could/should be in the exterior section, but i was hoping that Chad (our electrical magician), Doug and other electronics guys could help me out.
if this needs to be moved i'm sorry. thanks for your help guys
i have a fog kit from my 03 and i want to install it onto my 04. i'm comparing the installation instructions for the 02/03 against the 04/05. the actual cutting of the bumper and the fog light harness seem to be the same on both 02/03 and 04/05. the difference comes with the main harness that's installed in the cabin.
differences:
-02/03 has 2 relays
-04/05 has 1 relay
-02/03 wiring for the fog switch harness uses diff color wires from 04/05
-the 12 pin connection for the 04/05 is used where as there is no 12 pin connection on the 02/03
i'm guessing that bc the headlights changed from h4 to a 9005/9006 setup that the fog light wiring changed. i can use all the connections from the 02/03 main harness but three things worry me:
1) will it work without the 12 pin connection on the main harness to the cabin fuse box?
2) i know just because i connect everything that doesnt mean it will work
3) i'm worried that i will fry something.
the wiring diagrams can be found on the last page of the following links:
02/03 install instructions (http://www.handa-accessories.com/civic/sifogs.pdf)
04/05 install instructions (http://www.handa-accessories.com/civic/04sifog.pdf)
i know that this could/should be in the exterior section, but i was hoping that Chad (our electrical magician), Doug and other electronics guys could help me out.
if this needs to be moved i'm sorry. thanks for your help guys