PDA

View Full Version : d2 coilover adjusting ride height, HELP



R34L-St4tus
05-04-2010, 08:40 PM
I've installed these d2 coilover in nov. and now that summer is almost here i wanted to go a little lower. I went to go and adjust the collar on all 4 wheels but its stuck, probably due to the sand and salt over winter. if there is any tips or hint to get it loose, please let me know. i've tried to hammer a flat head at the collar and see if i could get it loose but still can't seem too. please, help me out.

petegriffen
05-10-2010, 07:23 PM
are those bouncy? mine have been sitting all winter and now that i finally took her out my whole ride is one big bounce. as far as lowering it you should use the tool it came with or if you bought it used just find any coilover tool i think its called a spanner wrench. before going low make sure you have the rear and front camber kits.