PDA

View Full Version : Post Pictures of your trunk/rear seat section!


jeenyusss
05-05-2010, 05:22 PM
Wanna see some pics. whether gutted with cpillars/rearstrut/midbars/autopower cage/etc.


post em up!!
Sucka
05-05-2010, 06:45 PM
I hope this counts.

http://i750.photobucket.com/albums/xx147/JosephPham23/IMG_2527.jpg
jeenyusss
05-07-2010, 07:09 AM
Slackers
jeenyusss
05-07-2010, 10:41 AM
Thanks for the post man... Looking fresh! Got any pics of the mid bar where it bolts to...got one coming and not 100%
Sucka
05-07-2010, 05:23 PM
Thanks for the post man... Looking fresh! Got any pics of the mid bar where it bolts to...got one coming and not 100%

Mine is the mugen rep. If you pm me with your cell phone # i can get it to you right away.
jeenyusss
05-07-2010, 05:32 PM
pmd


bump
talonXracer
05-22-2010, 12:03 PM
Here it is without the Vinyl leatherette.

http://i54.photobucket.com/albums/g96/talonxracer/IMG_0937.jpg

I will be adding a Sub into the rear floor and moving the battery from the spare tire well to behind the drivers seat. Today I took the seats and carpet out and will clean and remove the factory insulation and apply Chassis Saver and then LizardSkin sound and heat shield, then apply a bedliner to the floor.
trippy
05-22-2010, 12:14 PM
Here it is without the Vinyl leatherette.

http://i54.photobucket.com/albums/g96/talonxracer/IMG_0937.jpg

I will be adding a Sub into the rear floor and moving the battery from the spare tire well to behind the drivers seat. Today I took the seats and carpet out and will clean and remove the factory insulation and apply Chassis Saver and then LizardSkin sound and heat shield, then apply a bedliner to the floor.

looks heavey lol
02_epdriver
05-25-2010, 10:58 PM
Just what trippy said. How much weight is back their Doug? I know you got that beast under your hood but still.
talonXracer
05-26-2010, 07:14 AM
That weighs less than the original seat and spare tire cover and carpet. It is 3/16" Luan laminated to 3/4" blue foam. The spare tire well cover is strong enough for a person to stand on and not cave it in. These are just a prototype build, I plan on reducing the thickness of the foam to 1/2" with 1/8" LitePly laminated top and bottom with epoxy, glas cloth, CF and vacuum bagging to produce an cover that is as light, stronger, and that incorporates a sub box(minus the actual weight of the sub itself).

Just have to finish the corrosion repairs and then the LizardSkin install. http://www.ephatch.com/forum/showthread.php?55895-New-Interior