Getting Tuned @ Slowmotion Motorsports June 18th

[Stubby]

Yup, once again I am boosted with virtually the same kit I had before. Let's just say that I can't make up my mind. This time. The kit stays on no matter how crappy the economy gets. Here's the run down.

Full-Race Kit
t3/t67 Garret Turbo
44mm Tial Wastegate
Injector Dynamics 1000cc Injectors
Walbro 255 Fuel Pump
Tial Blow Off Valve
Aeromotiive FPR

I will be running boost pressure off the wastegate. Last time I got tuned I was creeping 7lbs. So I will be using a 5.8lb spring. This should be putting me around 10-12lbs. of boost.


Looking to atleast get around 450.

I will be getting tuned at Slowmotion Motorsports on Friday June 18th. I should be there around 10am.

If you aren't busy and you want to get together for some lunch let me know.

[Stubby]

Friday is the day I get tuned. I will be there at 10 till about 4-5pm probably. If you want to get some lunch or dinner let me know. I am always up to meet new hatchers or catch up with OG's

[FoReVaPmP]

wish I could see this beast in person... :popcorn:

[POOPTOOTH]

Kyle! I'm gonna slap you man...lol. You're worse than I am with these damn turbo kits! Glad you're sticking with it this time, although if things change can I get first crack at this kit with 'Brucie' pricing? :msmooch::mangel:

You're going to smash 450, no doubt about it. Hope all is well brother, gimme a call and let me know how she does on the rollers.

[EpThreeD]

Slowmotion in columbus right? Dang I wish I was back home, I'de be there.

[1GR8EP3]

man stubs you dissapeared for a second there.... glad to see your getting back into again, and those ID 1000cc's are the shit!. I have no doubt youll make what your aiming for.

[civictype_r04]

In for a video of the tuning...... btw good luck!!!!!

[Stubby]

well, I might be postponing the tuning. I can't get my brakes to hold. When it push in on the brake pedal I hear a woooshh of air somewhere. So I am guessing I have a vaccuum leak somewhere and I can't find it. I am going to call around and see if I can find the problem. I was up till 2am last night bleeding my brakes and trying to find out the problem.

[Stubby]

At slowmotion getting ready to start. Brakes are still mushy but he can still tune. So I will post what happens.

[1GR8EP3]

a bro just be careful after the tune until you get your brakes fixed.

[03K20A3Si]

Just saw this :) Good luck!!

[gtimportfanatic]

i need updates NAAAOOOOWWW

[socal_brandon2]

Exciting stuff! Let us know what numbers ya pull! :)

[Stubby]

441whp and 283ft lb

This was at a 11psi. I had to use a smaller spring to compensate for the boost creep. I was using a 5lb spring and I was creeping from 6psi to 11psi.

The guys at slowmotion motorsports are amazing. SERIOUSLY!!!!!! They tried bleeding my brakes for an hour. There is something going on with my brakes. I can't figure it out. I think I have to bleed my abs unit, but I have no clue how to do that. So I have all this horsepower and no way to use it. It will get fixed eventually just don't know when.

STUBBY

[gtimportfanatic]

wrd!.. hurry up n brake lol

[Falcon7]

Wow, Nice numbers Kyle!

[1GR8EP3]

damn those kits are flawless... 441 on a stock block... NICE NUMBERS

[Stubby]

yes sir.....charlie screams under boost. Corey at Slowmotion is a mastermind of hondata. Definately knows his way around a boosted K-Series. Wouldn't take my car anywhere else for a tune.