PDA

View Full Version : 02ep3si New motor build



02EP3SI
05-24-2010, 05:38 PM
Well got my new motor built.. It turned out pretty good. i was figuring pretty close to my old numbers of 253whp 191tq

Ended with 273whp 211tq tuned on the exact same dyno... Old and new numbers are shown here.

http://i212.photobucket.com/albums/cc151/02ep3si/Mobile%20Uploads/100MEDIA_IMAG0055.jpg

AUTiger
05-24-2010, 05:57 PM
what was all changed? It wasn't just the header was it?

02EP3SI
05-25-2010, 05:49 AM
no... he kept all my info from my last tune on there..

Same compression but i had to bore it out to 87.5mm other then that and the header it was all the same.

Kerby
05-25-2010, 06:16 AM
wow. that stage 2 cam is for NA setup?
i like that you pretty much gained everywhere!

imagine what it would do with the 2.65 kit and a Endyn massaged head. :meek:

yyi
05-25-2010, 06:32 AM
wow great numbers!!! glad to see you never gave up, lets hope the tensioner doesnt take a poop again.

02EP3SI
05-25-2010, 07:46 AM
wow. that stage 2 cam is for NA setup?
i like that you pretty much gained everywhere!

imagine what it would do with the 2.65 kit and a Endyn massaged head. :meek:

well, my head is blue print ported and polished.. I guess that helps a bit. And yeah they are the stage 2 brian crower n/a cams. very good cam in my opinion.

This was tuned on 93 pump gas also..


wow great numbers!!! glad to see you never gave up, lets hope the tensioner doesnt take a poop again.


driving with a stock k24a4 in my car with k pro is what made me have to do it again.. It was pointless to have the technology going to waste.. lol

nightrider2002
05-25-2010, 09:51 AM
Nice power curve! Looks like the new header helped quite a bit. Did the kid racing header clear the front sway alright with the K24?

bchaney
05-26-2010, 08:51 AM
Damn, not bad for 0.5mm bore and a new header. What was your old header? And you switched to the kiddracing one?

What's your build setup? I couldn't find it in your old threads.