New, but not to this site or k motors

[sleepyEP3]

Hey whats up fellas. Glad to be back. My old screen name used to be sleepy ep3 but I lost the email account settings:mcry: so, here I am. its been a bit since I have been on this site and its very cool to see many people experimenting with hybrid setups like K24/k20 etc. Many people when I was first on here were still running a rev-hard or cybernation kit, and barely making 260-270:mbiggrin:. Now many users are making more than 350. Anyway, I won't get on a rant. Hello again.

[johnkimble]

welcome back!

[FoReVaPmP]

You know what... you didn't even say what you got.... **Mah finger is ovah the BAN Button* .....:mangel:


:msmile::msmooch:

[sleepyEP3]

You know what... you didn't even say what you got.... **Mah finger is ovah the BAN Button* .....:mangel:


:msmile::msmooch:

LOL Well, I am in the process of putting together a
K24Z1/K20Z3 hybrid,
Precision 58/57E dual ball bearing turbo,
Fabworx sidewinder manifold
RBC intake mani,
KPRO,
custom 3" downpipe,
megan racing test pipe
Apexi N1 2.5" exhaust
1000cc injectors
Walbro 255 fuel pump
Billet motor mounts
Wiseco 8.8-1 pistons
Eagle rods
ACL coated race bearings
Stock K20Z3 head off 08' Si
6 speed LSD type R tranny
Tein Super Street dampers with pillow ball mounts
Hybrid racing timing chain tensioner
K24 Block guard insert
I'm sure I am leaving some stuff out but that is the gist of the build.
I am hoping that it will be done in about a month. All the parts are ordered and the head, block, pistons are at the machine shop now. :mtongue::mtongue: I think we (my tuner and I) are going to run appox 17-18 psi to start with, and go from there. Goal is 425 minimum at the ground on a Mustang dyno. There, happy? LOL:tehe:

[FoReVaPmP]

Yes David!.... U make me happy....:hay:



Good Deal mang...... I am giddy wit anticipation of teh DynO :popcorn:

[SinisterCivicSi]

want your old name back? :mwink:

[sleepyEP3]

want your old name back? :mwink:

Yes. How?

[SinisterCivicSi]

its magic. :mwink:

abbrah cadabbrah!

http://th07.deviantart.net/fs35/300W/f/2008/238/6/7/Necromancer___Upper_Deck_by_namesjames.jpg

[SinisterCivicSi]

now there is already a "Sleepy EP3" account, was that yours or someone else? i just took the space out to make your name. if the other is yours i can merge accounts, i just need you to verify the info so i dont merge incorrect accounts.

[sleepy ep3]

Gotcha. :mwink: Thanks. I used to have this screen name a while back, but I guess that was before the crash you all speak of.

[ginger]

LOL Well, I am in the process of putting together a
K24Z1/K20Z3 hybrid,
Precision 58/57E dual ball bearing turbo,
Fabworx sidewinder manifold
RBC intake mani,
KPRO,
custom 3" downpipe,
megan racing test pipe
Apexi N1 2.5" exhaust
1000cc injectors
Walbro 255 fuel pump
Billet motor mounts
Wiseco 8.8-1 pistons
Eagle rods
ACL coated race bearings
Stock K20Z3 head off 08' Si
6 speed LSD type R tranny
Tein Super Street dampers with pillow ball mounts
Hybrid racing timing chain tensioner
K24 Block guard insert
I'm sure I am leaving some stuff out but that is the gist of the build.
I am hoping that it will be done in about a month. All the parts are ordered and the head, block, pistons are at the machine shop now. :mtongue::mtongue: I think we (my tuner and I) are going to run appox 17-18 psi to start with, and go from there. Goal is 425 minimum at the ground on a Mustang dyno. There, happy? LOL:tehe:

just basic bolt ons i see. good luck with build. ready to see results

[sleepy ep3]

Yeah, me too. I am curious to see what the HP and TRQ will be. It will be somewhat restricted due to the small exhaust diameter. I only have the 2 1/4 apexi n1 on there now. I can't afford to build a custom exhaust out of stainless, but I will tune it with what she has, for now, until I can find a SS 3 inch setup or build one. Should do around 400, maybe

[sp00n sp0rts]

welcome back to the site bro very nice set up.. God Speed..

[66elwood99]

I was going to ask where you've been until I read your name..... about time you woke up!

Don't forget the pics after assembly.......

[sleepy ep3]

Believe me, there will be pics and vids to come, lol. i can't wait. Sucks tho because street racing is not all that big in St. Louis, so it will just have to be 1,2,3,4 gear pulls in the vids :tehehyper: