View Full Version : Rota Slipstream Center Caps
jh604
06-04-2010, 07:12 PM
What are you guys with slips using as center caps? Does anyone know the size of them? I hate the rota centercaps!
whitehonda
06-12-2010, 07:00 PM
i just left em off since they were ugly to begin with, if anyone wants mine they can have em
sirsol66
06-12-2010, 08:47 PM
I have mine on the front with the rota emblem removed but I can't get the rear to fit due to the bearing dust shield. Can you just smack the dust shield down to get to fit or is that not a very good idea?
usedep3
06-12-2010, 09:20 PM
it's 2.75" the 5 lug centercaps will fit. these are off of the older accord
http://i47.photobucket.com/albums/f195/usedep3/IMG_0408.jpg
Calvinep3
06-13-2010, 11:11 AM
this is what i have
http://i110.photobucket.com/albums/n118/_Calvin1/Ep3/IMAG0045.jpg
jh604
06-13-2010, 11:40 AM
this is what i have
http://i110.photobucket.com/albums/n118/_Calvin1/Ep3/IMAG0045.jpg
which ones are those or how did you do that?
Calvinep3
06-14-2010, 09:02 AM
jh604
i bought my rims used and they came with the caps
my rims are size 15
and the caps have this one the back
Honda
Pa6+PPe
44732-SX0-J010
hope that helps!
jh604
06-14-2010, 11:22 PM
are all the center caps 2.75" i have 16"s btw
Calvinep3
06-16-2010, 10:40 AM
idk. i dont think they are all the same size
danito321
09-02-2010, 06:13 PM
hey could i get your center caps if you still got 'em?
Rekognize
04-21-2011, 04:21 PM
Posting this for future reference..
Subzero and slipstreams share the same cap along with:
2005 Odyssey: Part# 44732-s0X-A01
http://i.imgur.com/cKgS9.jpg http://i.imgur.com/IsSKM.jpg
S2000: Part# 44732-S87-A00
http://i.imgur.com/SLGIC.jpg http://i.imgur.com/oAocx.jpg http://i.imgur.com/JNvKD.jpg
Unknown: Part# 44732-SV7-A00
http://i.imgur.com/DhMev.jpg http://i.imgur.com/qhC5a.jpg
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.