Turbo Headers!!!

[2002Si]

Chech out this site, if you go to the products menu it will show you that they have the turbo headers made for our cars!!! check it out!!!

www.turboheaders.com/?ref=speedoptions

[clownswlleatu]

Looks nice! What's the difference in cost between this product and having one custom made? Anybody know?

[2002Si]

I just saw it on speed options and figured you'd like to see it??

[2002Si]

Do you think it's a good price?

[Whooopasss]

$600.. F*ck that!! http://www.jgstools.com/turbo/ would do it for $374.99 so email them if you want one.. I'm negotiating with them right now..http://www.jgstools.com/turbo/weldlog.jpg

[2002Si]

I got a warranty but I might buy them when my Warranty goes up

[ssvr6]

Originally posted by 2002Si
I got a warranty but I might buy them when my Warranty goes up

I'm pretty sure we all do...

:rolleyes:


Steve

[Whooopasss]

Ok.. the turbo manifold pipes (T and 90 deg bend was ordered today) I also have the flange in.. if everything is here by Saturday then the manifold will all be welded up along with the T3 flange..

T3 with 60 ar compressor and 48 ar turbine is about to be rebuilt
450 cc DMS injector, injector clips and resistor pack also in

One thing though, when we did a test fit, the T3 with 60 Ar housing is going to be a tight fit into the engine compartment. Looks like we have to slide the turbo from the right side of the engine or from the bottom.. I'll take pics this Saturday..

[rhs29]

will a custom built turbo be better than waiting for a bolt-on turbo kit ( that HKS is due to bring out this summer)...??... a stock engine could only handle about 7-9 psi anways, and a custom kit is best when is high boost....i am torn between a custom turbo and a bolt-on...suggestions?..

[Whooopasss]

Well, I figured, a custom kit would work best for me since I dont have to drop $3k at one time.. also I dont like the one size fits all of the turbo kit.. another thing.. I just cant wait anymore.. it's taking too long..

On a cutom kit, if you know what you are doing...

[pocketrocket]

Hey Whooop, what are you using for fuel managment?
Also, does anyone know if our K20 is closed or open deck?

Thanks
-PR

[Whooopasss]

hey man.. the k20 is an open deck.. I will be using the smc unit from zip for controlling the 450cc dsm injector.. it works like an afc hack, but beter..

smc unit (http://forums.clubsi.com/showflat.php?Cat=&Board=UBB12&Number=1383768&page=0&view=collapsed&sb=5&o=0&fpart=)