View Full Version : 17x9+25 help!!!
civictype_r04
06-12-2010, 09:31 AM
How will these fit and look..... also what tire will be needed???? http://www.enjukuracing.com/17x9-chromium-black-51143120-p-10242.html
27rocks
06-12-2010, 10:11 AM
They will fit the front with little to no problems.. Camber will be needed but not to bad. In the rear is a different story. Im running a 17x9 +35 with 245/40 tires and need at least -2.8 to not rub at my height (i got about a finger and a half gap). You have to roll your fenders!!! If you run a smaller tire you can use a little less camber but it's still going to need at least -3 degrees. 225-235 would be my tire choice depending on your ride height... if you go any lower with a tire you might as well just buy something in 7" wide wheels.
EpThreeD
06-12-2010, 02:24 PM
Lots of work for the rear. BTW that is not the right bolt pattern in the link provided. EP's= 4x100
BaLisTek
06-12-2010, 02:29 PM
Lots of work for the rear. BTW that is not the right bolt pattern in the link provided. EP's= 4x100
02-03 4x100
04-05 5x114.3
You can see by avatar and sig that OP has 04-05 EP. Link is correct
27rocks
06-12-2010, 03:20 PM
Lots of work for the rear. BTW that is not the right bolt pattern in the link provided. EP's= 4x100
Actually not really... camber kit and rolled fenders. It can all be done in less than 2 hours.
powdbyrice
06-12-2010, 08:56 PM
Dang, how much are those going to weigh?
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.