front camber kit bolt size

[hyjnx]

after doing a search around the net im getting conflicting numbers. I currently bought wat i thought was a complete SPC camber kit...the rear bolted up just fine but according to my friend who did the install the fornt bolts were too small. he said they were a 14mm and needed to be a 19mm? as far as numbers around the net im seeing 16mm and 14mm. could anyone clear this up my tires life are at stake

[sLiCk]

Earlier years had 14mm bolts, later years had 16mm bolts. You can always take one of your bolts out and measure it.

[hyjnx]

i have an 02 but the 14 was apparently too small

[SHG_EasyE]

Unless your 02 has had the suspension replaced it uses the 14mm bolts. 02's use the same size as the EM2, for 03-05 the increased the size to the 16mm. Your friend probably said they were 19mm bolts because the head uses a 19mm wrench, but bolts are measured by shank diameter not head size.