new to this just bought a k24a1 for

[i_love_my_ep3!]

hey guys im new to this site i have a 2002 ep3 stock everything but c/a/i and bc short shifter i just bought a k24a1 with 45k miles what do i need to complet the swap the guys says he just droped it in his ep3 and just used the k20a3 ecu help is needed thanks!

[VIZHUNZ02SI]

you need kpro, and the crv passenger side mount. other than that everything is a direct bolt on

[i_love_my_ep3!]

thanks man

i did somew research

1. whats the hearder i can get for the swap or do i need a custom hearder cause of the sway bar clearence
2. can i use my stock injectors or will 330 be better
3. has anyone ever ran a k24a1 with ep3 ecu and 330 injectors
4.will runing it on the ep3 ecu ruin or lead to major porblems if i get kpro later

[mp_02si]

You need to read the stickies.... that should answer about any question you have about this swap. I even believe there is a thread talking strictly about the k24a1 swap.

heres the link since im a nice guy
http://www.ephatch.com/forum/showthread.php?t=43521

[SinisterCivicSi]

searching in the ep3 swap section for threads already posted will answer ALOT of your questions. the info is already there, you just have to read it. :msmile:

[i_love_my_ep3!]

ohh man feel like such a noob thanks for the help:mbiggrin:

[mugen03]

i had my k24a1 in with 310 injectors an stock a3 ecu. it runs but you wont get the potential of the motor till you get kpro man, i would really suggest not dropping the motor in until you can get kpro honestly.