View Full Version : EPR CTR Tir Rod and Ball Joint replacement...HeLP
rides2000
07-12-2010, 04:07 PM
I have a us ep3 with Civic Type R suspension. Are the ball joints the same as the US spec and which Tie Rod is recommended (DC5 or ep3)
You need everything off the US ep3 Si :)
rides2000
07-13-2010, 02:33 PM
so in regards to tie rod and ball joint I could order off a ep3 us... What about brake pads front and rear?
yes :)
if you got the Civic type r front brakes, Buy RSX-S brakepads and rotors on the front. rear is same on all three.
rides2000
07-14-2010, 03:17 PM
so the type r rotors which are 300 mm the same as the type s
Yes, and a couple of others, google brembo 25831
and they should have these specs if you cant find part numbers:
size: 300mm
thinkness: 25mm
minimum thickness :23mm
senter bore 64.1
offset/total thickness: 47mm
rides2000
07-22-2010, 05:10 PM
I have the calipers that says type r not brembo. are they the same?
they came on the 30th annyversaty(spell check :p) ep3 type r and maybe on the facelift JDM. But they are still the same as the RSX Type-s :)
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.