USAF EP3
07-18-2010, 11:13 PM
Hi all, I'm building my first K motor here coming from a background of D and B series motors. First I do have to mention that what I previously knew had to be thrown out since the newer K series engine is a whole different ballgame. So I bought the EP back in November of 2009 and since then I've been contemplating to do a swap and/or build. Okay now to the nitty gritty, here are the parts I've bought so far.
NOTE: New pictures and updates to the build will be edited into this original post
Head:
2003 Type S K20A2 cylinder head
Stock cams, springs, valves, etc
Block:
Bare CR-V K24A1 block
K24A1 Crankshaft
Type S K20A2 oil pump
Now for the goodies list of parts I got so far:
PRC Intake Manifold with 65mm throttle plate
Blueprint K20 35mm/30mm flat type valves standard size
Blueprint dual valve springs and retainers
Blueprint valve spring keepers/seals/seats
Blueprint Pro Series I-beam forged rods
Wiseco's 11.1:1 87.5mm
Blueprint head studs package
Parts planned to buy for the setup:
Blueprint Stage 2+ Billet Cams
OEM Honda Main/Rod bearings
Hybrid Racing timing chain tensioner upgrade
DC5R Flywheel 11lb-ish (or equivalent)
Innovative 75A mounts
Adding more parts to the list as they come to mind...
K20A2 Head
http://img198.imageshack.us/img198/1274/1003434p.th.jpg (http://img198.imageshack.us/i/1003434p.jpg/)
PRB stamp mwuahhfwaaakazzz
http://img512.imageshack.us/img512/2438/1003436.th.jpg (http://img512.imageshack.us/i/1003436.jpg/)
K24A1 Block
http://img178.imageshack.us/img178/8819/1003439.th.jpg (http://img178.imageshack.us/i/1003439.jpg/)
K24A1 Block stamp =D
http://img180.imageshack.us/img180/3201/1003438v.th.jpg (http://img180.imageshack.us/i/1003438v.jpg/)
K24 crankshaft
http://img441.imageshack.us/img441/5168/1003433t.th.jpg (http://img441.imageshack.us/i/1003433t.jpg/)
Blueprint flat type valves
http://img822.imageshack.us/img822/1388/1003445yn.th.jpg (http://img822.imageshack.us/i/1003445yn.jpg/)http://img219.imageshack.us/img219/3255/1003444u.th.jpg (http://img219.imageshack.us/i/1003444u.jpg/)
Wiseco 87.5mm 11.1 compression forged pistons :D
http://img203.imageshack.us/img203/512/imag0010k.th.jpg (http://img203.imageshack.us/i/imag0010k.jpg/)http://img822.imageshack.us/img822/8889/imag0011ec.th.jpg (http://img822.imageshack.us/i/imag0011ec.jpg/)http://img574.imageshack.us/img574/9801/imag0012f.th.jpg (http://img574.imageshack.us/i/imag0012f.jpg/)
Blueprint Pro Series I-beam rods
http://img230.imageshack.us/img230/2741/imag0009d.th.jpg (http://img230.imageshack.us/i/imag0009d.jpg/)
Blueprint Dual Valvesprings Kit and Titanium Retainers
http://img820.imageshack.us/img820/1079/imag0013ge.th.jpg (http://img820.imageshack.us/i/imag0013ge.jpg/)
NOTE: New pictures and updates to the build will be edited into this original post
Head:
2003 Type S K20A2 cylinder head
Stock cams, springs, valves, etc
Block:
Bare CR-V K24A1 block
K24A1 Crankshaft
Type S K20A2 oil pump
Now for the goodies list of parts I got so far:
PRC Intake Manifold with 65mm throttle plate
Blueprint K20 35mm/30mm flat type valves standard size
Blueprint dual valve springs and retainers
Blueprint valve spring keepers/seals/seats
Blueprint Pro Series I-beam forged rods
Wiseco's 11.1:1 87.5mm
Blueprint head studs package
Parts planned to buy for the setup:
Blueprint Stage 2+ Billet Cams
OEM Honda Main/Rod bearings
Hybrid Racing timing chain tensioner upgrade
DC5R Flywheel 11lb-ish (or equivalent)
Innovative 75A mounts
Adding more parts to the list as they come to mind...
K20A2 Head
http://img198.imageshack.us/img198/1274/1003434p.th.jpg (http://img198.imageshack.us/i/1003434p.jpg/)
PRB stamp mwuahhfwaaakazzz
http://img512.imageshack.us/img512/2438/1003436.th.jpg (http://img512.imageshack.us/i/1003436.jpg/)
K24A1 Block
http://img178.imageshack.us/img178/8819/1003439.th.jpg (http://img178.imageshack.us/i/1003439.jpg/)
K24A1 Block stamp =D
http://img180.imageshack.us/img180/3201/1003438v.th.jpg (http://img180.imageshack.us/i/1003438v.jpg/)
K24 crankshaft
http://img441.imageshack.us/img441/5168/1003433t.th.jpg (http://img441.imageshack.us/i/1003433t.jpg/)
Blueprint flat type valves
http://img822.imageshack.us/img822/1388/1003445yn.th.jpg (http://img822.imageshack.us/i/1003445yn.jpg/)http://img219.imageshack.us/img219/3255/1003444u.th.jpg (http://img219.imageshack.us/i/1003444u.jpg/)
Wiseco 87.5mm 11.1 compression forged pistons :D
http://img203.imageshack.us/img203/512/imag0010k.th.jpg (http://img203.imageshack.us/i/imag0010k.jpg/)http://img822.imageshack.us/img822/8889/imag0011ec.th.jpg (http://img822.imageshack.us/i/imag0011ec.jpg/)http://img574.imageshack.us/img574/9801/imag0012f.th.jpg (http://img574.imageshack.us/i/imag0012f.jpg/)
Blueprint Pro Series I-beam rods
http://img230.imageshack.us/img230/2741/imag0009d.th.jpg (http://img230.imageshack.us/i/imag0009d.jpg/)
Blueprint Dual Valvesprings Kit and Titanium Retainers
http://img820.imageshack.us/img820/1079/imag0013ge.th.jpg (http://img820.imageshack.us/i/imag0013ge.jpg/)