Express Up and Down drivers window won't work

[NateCox]

I put in a new O2 sensor, so had unplugged the battery. Now the express function is gone for up and down...

Is there a way to reset that?

[NateCox]

no one has disconnected their battery ever? ... I wonder if it's tied with the OEM head unit (I have an OEM spare)...hmmmm???

[HondaFreak]

Roll the window all the way up. Press the button and roll it all the way down then let go. Then roll it all the way up again. The switch is now reset and should work again as one touch up and down.

Christian

[RHCP0801]

^^^not sure if that way works also but this is how i always did it when i worked at honda after putting in new batteries and stuff like that

you need to relearn the switch memory

1. make sure the window is up
2. roll the windown all the down and continue holding the switch down for 5 seconds
3. roll the window all the up and continue to hold the switch up for 5 seconds
4. test out the auto up and down, calibration should be completed

[NateCox]

that worked! guess it just needed to restablish the full range before it worked...

we should add a sticky on this to the DIY or other forum...

Thanks!!