PDA

View Full Version : Help!. p0113 & p1167



Calvinep3
07-30-2010, 11:13 PM
Ok so for the last month ive had my check engine light on
it came on right after me and my bro changed my clutch
i thought it was an o2 sensor so i bought new ones. one code went away now im stuck with p0113 & p1167
can anyone gives me a heads up on what i should check for?

Calvinep3
07-31-2010, 06:17 PM
bump anyone??

Calvinep3
08-01-2010, 08:11 AM
update.
i worked on my car last night and took off the primary sensor
p1166 came on. i bought both sensors at the same time so i kno my sensors are working
p0113 went away after i replaced the intake sensor.
now 1167 wont go away
maybe i need a new cat?
anyone?

jh604
08-01-2010, 09:36 AM
how many miles on the car and the sensor...mods?

HondaFreak
08-01-2010, 10:13 AM
Manual says check for loose connections at AF sensor relay (behind glove box). And the sensor and ecu. If you just bought a new sensor it is either a loose connection or you'll need to reset the ecu.

Christian

Calvinep3
08-01-2010, 09:52 PM
110xxx miles on car.about 3k miles on sensors. only mod is hks hi power

Calvinep3
08-01-2010, 09:52 PM
thnx i will check this as soon as i get a chance
how do i reset the ecu???

RHCP0801
08-01-2010, 10:03 PM
to reset

Turn the ignition switch OFF, and remove the No. 6 ECU (ECM) (15A) fuse from the under-hood fuse/relay box for 10 seconds than reinstall

Start the engine. Wait for at least 80 seconds.

see if the code comes back

also did you replace these with oem honda sensors?

Calvinep3
08-01-2010, 10:03 PM
1166 is now gone tho
and i replaced them with bosch sensors

the only code it reads is 1167 now

RHCP0801
08-01-2010, 10:05 PM
http://img828.imageshack.us/img828/3735/54643249.png (http://img828.imageshack.us/i/54643249.png/)

RHCP0801
08-01-2010, 10:06 PM
i have heard of bosch sensors failing even when new, if you reset the ecu and the code still shows....get a honda one

Calvinep3
08-01-2010, 10:07 PM
ok so i did this last night
i reset the ecu
then cleared the code and everytime i clear the code it takes longer for it to come back
but it still does show up after a minute or 2

Calvinep3
08-01-2010, 10:10 PM
yea i was thinking the same thing. i will look for a honda one. hopefully this solves the prob. any website that sell honda sensors for a reasonable price???

RHCP0801
08-01-2010, 10:12 PM
is everything hooked up ok? Check the these fuses:

No. 14 OPTION (30A) fuse in under-hood fuse/relay box.

No. 2 +B LAF (A/F) HEATER (20A) fuse in under-dash fuse/relay box.

No. 4 ACG (10A) in under-dash fuse/relay box.

if these are good and all the connections are good, go to honda and get a new sensor because that one is not good

RHCP0801
08-01-2010, 10:13 PM
you can check www.majestichonda.com, thats pretty much it

RHCP0801
08-01-2010, 10:14 PM
nevermind that fuse part is only for 1166 not 1167

Calvinep3
08-01-2010, 10:18 PM
will do
thanx alot bro!

just out of curiosity
is p1167 on caused by o2 sensors?

RHCP0801
08-01-2010, 10:20 PM
1166 and 1167 are both from the primary o2

Calvinep3
08-01-2010, 10:25 PM
ok. what about the sencodary o2?

RHCP0801
08-01-2010, 10:33 PM
not sure but your other code was for the iat sensor, the 0113

Calvinep3
08-06-2010, 07:38 PM
thnx alot man!
another quick question
my abs light is also on
i just purchased the two front sensors
where can i find the relay?

Calvinep3
08-15-2010, 11:07 AM
i dont want to make a new thread
but does anyone have a manual for the 02 and can tell me where the abs relay is at??

RHCP0801
08-15-2010, 01:34 PM
why do you want to know where the relay is

Calvinep3
08-16-2010, 09:27 AM
because i took it to this shop and they let me scan it for free
and the machine said the front passenger speed sensor was out and the abs relay was out
i just cant find the dam relay.
any ideas?

Calvinep3
08-18-2010, 11:29 PM
anyone??