PDA

View Full Version : where can i get a factory si side skirt



good
08-09-2010, 06:23 AM
hey guys,

ive been trying to find the factory si side skirts not the hfp side skirts. i wanted to see if you guys know where to buy them online?

EPSU3
08-09-2010, 04:58 PM
I'd assume that majestichonda.com will have them but as I recall it can be cheaper to buy hfp or aftermarket.

RedSiBaron
08-09-2010, 05:22 PM
heres a link, its about 260 a skirt through majestic

http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=CIVIC&catcgry2=2004&catcgry3=3DR+SI&catcgry4=KA5MT&catcgry5=MOLDING+-+SIDE+SILL+GARNISH

jh604
08-09-2010, 10:03 PM
heres a link, its about 260 a skirt through majestic

http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=CIVIC&catcgry2=2004&catcgry3=3DR+SI&catcgry4=KA5MT&catcgry5=MOLDING+-+SIDE+SILL+GARNISH

To install them, Id need #30,31,32?

ttttrigg3r
08-09-2010, 10:15 PM
Iono about you guys but these skirts look really good, looks better than HFP skirts. it's just too damn expensive.

EPSU3
08-10-2010, 07:48 AM
yeah the HFPs are cheaper if you need a pair. However the hfp can look out of place without at least a front lip.

RedSiBaron
08-10-2010, 10:04 AM
To install them, Id need #30,31,32?

yes and you would need them in certain quantities, refer to the number next to them for the quantity for both sides...also id like to add that they wont install with the clips that pop into the metal on an 02/03 since the 04/05 have holes in the rocker for installation of these...youd need to use the sticky clips instead, which i do not have a part number on currently

PatrickJamesYu
08-10-2010, 10:56 AM
Iono about you guys but these skirts look really good, looks better than HFP skirts. it's just too damn expensive.

Dude, I fully agree

jh604
08-10-2010, 05:53 PM
yes and you would need them in certain quantities, refer to the number next to them for the quantity for both sides...also id like to add that they wont install with the clips that pop into the metal on an 02/03 since the 04/05 have holes in the rocker for installation of these...youd need to use the sticky clips instead, which i do not have a part number on currently

So i'm installing them onto my 02, the clips will not work?

usedep3
08-10-2010, 09:31 PM
i don't know if you can see these holes but those push clip he's mentioning go along the rocker panel located below the doors. iirc there's 9 on each side.

http://i458.photobucket.com/albums/qq301/f42000mcs/EP3JDMtoUSDMSideSkirtInstallImage02.jpg

good
08-12-2010, 06:05 PM
thanks guys this has helped me alot

good
08-12-2010, 06:37 PM
quick question guys
do you guys know the sticky honda oem clips model number or a link to them i have a 03 civic so i dont have the holes already like the 04-05