PDA

View Full Version : window help please



epmoose
08-28-2010, 03:16 PM
hi im new here and not entirely sure if this is the right section but i replaced my lock actuator today and now im having trouble getting the window channel back in. i thought i had it right and went to test it and now the window is completely stuck and off track a little. I cant pull it back up and the switch does pretty much nothing but make it worse. any help is greatly appreciated.

3dkahuna
09-18-2010, 08:31 AM
I sent you a PM on this. I hope you have it fixed by now.

Get some Spray White Lithium Grease and spray the channels to help reduce the friction between the rubber channels and window. Open back up the door panel and check the Window Channel Guide that you loosened from my video guide. Your window Channels may need to be replaced if they have worn to a certain point, but then again, greasing your channels may help as well. Let us know if you still need help.