PDA

View Full Version : Mugen 5 Speed Shift Knob - Out of Stock



sterk14
08-30-2010, 08:25 PM
Hoping to find this Mugen Shift knob - passwordjdm says out of stock with no future ETA. Any suggestions?
Thanks

http://passwordjdm.com/Mugen-5-Speed-Shift-Knob-Ball-Type-P2953C254.aspx

usedep3
08-30-2010, 08:56 PM
it's an oem honda knob you can get it at various outlets including your local dealership. i think for $120 you might as well pick it up at the stealership. the oem part number is: 54102-XTK-000

also, ebay link (http://cgi.ebay.com/ebaymotors/09-HONDA-FIT-SPORT-MUGEN-GENUINE-SHIFT-KNOB-5SPD-OEM-_W0QQcmdZViewItemQQhashZitem4a9fda4a5bQQitemZ32050 9463131QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries)

sterk14
08-30-2010, 09:14 PM
it's an oem honda knob you can get it at various outlets including your local dealership. i think for $120 you might as well pick it up at the stealership. the oem part number is: 54102-XTK-000

also, ebay link (http://cgi.ebay.com/ebaymotors/09-HONDA-FIT-SPORT-MUGEN-GENUINE-SHIFT-KNOB-5SPD-OEM-_W0QQcmdZViewItemQQhashZitem4a9fda4a5bQQitemZ32050 9463131QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries)
thanks. wasnt expecting someone to give me a part #. really appreciate it

T_Virus
08-31-2010, 12:13 PM
Look at this link

http://www.1hondaparts.com/Scripts/prodView.asp?idproduct=-53

It is for $92.80. I got it for $101.53 total. It is probably the cheapest. Join the mugen shift knob club.

sterk14
09-01-2010, 06:15 PM
Look at this link

http://www.1hondaparts.com/Scripts/prodView.asp?idproduct=-53

It is for $92.80. I got it for $101.53 total. It is probably the cheapest. Join the mugen shift knob club.

Definitely planning on it... do i need to get a JDM shift boot too. The stock usdm boot clips to the bottom of the stock shift knob so i'm assuming it wont work on the mugen one????

johnkimble
09-01-2010, 07:20 PM
holy shit that's a grip for a shift knob. and people complain about the cost of kpro

sterk14
09-01-2010, 08:13 PM
holy shit that's a grip for a shift knob. and people complain about the cost of kpro
ha i dont complain about that... i just accept that i cant afford it.

also thinking about machining my own mugen replica knob. i have access to everything, laser etching and anodizing machines and stuff. just need to know the dimensions of the knob like diameter (anyone wanna measure theirs for me?) and i'd have to get a pretty good picture of the shift pattern and logo to laser etch a good copy

T_Virus
09-02-2010, 12:39 PM
Definitely planning on it... do i need to get a JDM shift boot too. The stock usdm boot clips to the bottom of the stock shift knob so i'm assuming it wont work on the mugen one????

I think it might work with the USDM ....I have the JDM shift boot on mine with the mugen shift knob.

johnkimble
09-02-2010, 01:50 PM
it will look like ass with the USDM boot

sterk14
09-02-2010, 01:56 PM
it will look like ass with the USDM boot

thats what i figured