OEM foglight harness install

[Jukka]

Does any one have a how-to or the written instructions from honda about how to install?? I got an oem harness from Wilpezash and i have some of it figured out because its like my flea-bay kit's harness.

Heres a picture of the connections im not 100% sure about.
http://i240.photobucket.com/albums/ff213/6GCCanada/njpics070-1.jpg
http://i240.photobucket.com/albums/ff213/6GCCanada/njpics071-1.jpg
http://i240.photobucket.com/albums/ff213/6GCCanada/njpics073-1.jpg

Any ideas?? Im not in a huge rush, but i kinda wanna get it figured out. I should be gettin my ctr kit painted in the next few weeks, so i wanna have it figured out around the same time i get it all installed.

[ShadowEP3]

http://www.pdfdownload.org/pdf2html/pdf2html.php?url=http%3A%2F%2Fwww.handa-accessories.com%2Fcivic%2Fsifogs.pdf&images=yes

[Jukka]

^^ you da man. Thanks dude.

[jed_averill]

Are those diagram only for OEM foglights?

Would it work on something from ebay like this: http://cgi.ebay.com/ebaymotors/02-05-HONDA-CIVIC-SI-3DR-YELLOW-FOG-LIGHTS-OEM-SWITCH-_W0QQcmdZViewItemQQfitsZModelQ3aCivicQ7cSubmodelQ3 aSiQ7cYearQ3a2002QQhashZitem2c56d5d860QQitemZ19043 5416160QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries#ht_6454wt_1134

[Jukka]

The e-bay harness are different. They only have the one power connection and have to be modified a bit. Or at least mine did. The stupid connector that is suppost to connect into the fuse box didn't fit so i had to cut the terminal off and put a spade connector on instead.

EDIT: I looked through the installation info, but i still cant figure out the one random small wire in the third picture i posted. Any ideas??

[ShadowEP3]

its the same for ebay harnesses to an extent

i actually have no idea what that wire is for

[Ronnie]

Are those diagram only for OEM foglights?

Would it work on something from ebay like this: http://cgi.ebay.com/ebaymotors/02-05-HONDA-CIVIC-SI-3DR-YELLOW-FOG-LIGHTS-OEM-SWITCH-_W0QQcmdZViewItemQQfitsZModelQ3aCivicQ7cSubmodelQ3 aSiQ7cYearQ3a2002QQhashZitem2c56d5d860QQitemZ19043 5416160QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries#ht_6454wt_1134



Yeah no matter which ebay fog u get
it works as good as OEM ;)

[Ronnie]

The e-bay harness are different. They only have the one power connection and have to be modified a bit. Or at least mine did. The stupid connector that is suppost to connect into the fuse box didn't fit so i had to cut the terminal off and put a spade connector on instead.

EDIT: I looked through the installation info, but i still cant figure out the one random small wire in the third picture i posted. Any ideas??


the one u have question mark on here :
http://i240.photobucket.com/albums/ff213/6GCCanada/njpics071-1.jpg

thats the main harness that suppose to go to ur fuse box

[Jukka]

Yea i know that one, im just curious about the one small single wire by its self with the question mark. It looks like it should go into some sort of clip thats missing or go into a pig tail or something.

[Chad]

Yea i know that one, im just curious about the one small single wire by its self with the question mark. It looks like it should go into some sort of clip thats missing or go into a pig tail or something.

that one has me completely baffled too.

[Ronnie]

Yea i know that one, im just curious about the one small single wire by its self with the question mark. It looks like it should go into some sort of clip thats missing or go into a pig tail or something.

where is the end of that wire ?
does it come from the relay ? or switch ???
-
did u buy this kit brand new or used ???

[Jukka]

I bought it from Wiplezash along with all the parts to install JDM foglights (bezels, hardwear, etc). I think the harness is suppost to be a European harness (it uses a bosch relay), so it might install different. Plus compared to the USDM fog harness, this one only is running a single relay. The end of that wire is as you see it. Its seperate and just the single wire by its self.

[Chad]

Just FYI, bosch relays are VERY common America.

[Ronnie]

I bought it from Wiplezash along with all the parts to install JDM foglights (bezels, hardwear, etc). I think the harness is suppost to be a European harness (it uses a bosch relay), so it might install different. Plus compared to the USDM fog harness, this one only is running a single relay. The end of that wire is as you see it. Its seperate and just the single wire by its self.

u can run both lights on one relay , thats doesn't matter. just all the current will be on that relay particularly instead
before u install anything. u can just put that one pin and the two pins connector into ur fuss box and get multimeter just to see if u have any current.
have u done that ???

[Jukka]

I havent done anything yet, just because im waiting to get my front bumper painted. I wanted to figure it out before i got to install everything.