Triangle bar

[civictype_r04]

Hey anyone have any pics of the rear triangle bar setup crispychicken was running. The one where he used 3 c pillar bars in the back seat area.

[MugenReplica]

I have the exact same setup. I'll run out to the car and see if I can get a cell phone pic.

[MugenReplica]

Tried taking a couple of quick shots, but it's too dark. Hopefully tomorrow I'll have a pic for you.

[civictype_r04]

Thanks dude where did you get the bars at did you just use the ones off ebay. I'm going to do it just want a pic!

[MugenReplica]

Thanks dude where did you get the bars at did you just use the ones off ebay. I'm going to do it just want a pic!

I got my bar setup from another member on here. My bar setup actuallly looks like this (bar across where seat used to be->|X|<-bar mounted from top seat belt mount).

Anyways, on that note.......I did save chrispychickens setup pics awhile ago.
http://img.photobucket.com/albums/v211/EP3SINY/chrispics006-1.jpg
http://img.photobucket.com/albums/v211/EP3SINY/chrispics009.jpg
You can also mount a bar across the lower seat like mine. Chrispy's here doesn't have it though.

[civictype_r04]

I cant wait to see yours!!!!!

[civictype_r04]

What bars did you use and where did you get them from??

[MugenReplica]

I mentioned above. I got mine from another member. I think his screenname was speeddemon? I can't remember for sure though.

[civictype_r04]

How is the quality of the bars? I was thinking of getting some off of ebay to do this.......

[Sucka]

i'll post mine.

http://i17.photobucket.com/albums/b51/05HondaCivicSi/IMG_2527.jpg

[civictype_r04]

i'll post mine.

http://i17.photobucket.com/albums/b51/05HondaCivicSi/IMG_2527.jpg

What bars did you use to make yours????

[Sucka]

What bars did you use to make yours???

C pillar bars.

I just measured everything before i bought the exact size bars that i needed.

[ep-unit]

C pillar bars.

I just measured everything before i bought the exact size bars that i needed.

are the c pillar bars ep specific to make the x?

[ep3egg]

i'll post mine.

http://i17.photobucket.com/albums/b51/05HondaCivicSi/IMG_2527.jpg

pure awesomeness.

[Sucka]

are the c pillar bars ep specific to make the x?

No the bars are not ep spec. I measured everything before i purchase the bars individually.


pure awesomeness.

Thanks

[civictype_r04]

The RSX ones will fit to make the triangle.

[Sucka]

Post up pictures when you get it done.

[jh604]

got the email of the guy your buying from?

[civictype_r04]

huh?

[jh604]

huh?

email of the seller sorry

[1fasthb]

so u can just buy 3 pillar bars to do this set up?


edit: so you just buy 3 of these from the link to do this set up?
http://cgi.ebay.com/ebaymotors/02-06-ACURA-RSX-TYPE-S-C-PILLAR-TIE-STRUT-BAR-03-04-05-_W0QQcmdZViewItemQQhashZitem2c5769d4dbQQitemZ19044 5114587QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

[1fasthb]

so u can just buy 3 pillar bars to do this set up?


edit: so you just buy 3 of these from the link to do this set up?
http://cgi.ebay.com/ebaymotors/02-06-ACURA-RSX-TYPE-S-C-PILLAR-TIE-STRUT-BAR-03-04-05-_W0QQcmdZViewItemQQhashZitem2c5769d4dbQQitemZ19044 5114587QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries
3days later still no responce? :(

[civictype_r04]

Yea sorry man!!! Mine just came in today ill take pics when I open them up. I'm probably going to install them Saturday morning. I post up pics when they are in!!!!!!

[Sucka]

Yea sorry man!!! Mine just came in today ill take pics when I open them up. I'm probably going to install them Saturday morning. I post up pics when they are in!!!!!!

yeeee!!!!!

[1fasthb]

what var's did u get and were from can u post a link?

[civictype_r04]

what var's did u get and were from can u post a link?

What you trying to say dude????

[thisisagame24]

i think he asked what bars you got and where you bought them from

[1fasthb]

yea supposed to be bars not vars

[thisisagame24]

every one loves a good var every once in a while

[1fasthb]

were the update on this?

[urthworm]

3 dc5 cpillar bars works just fine.. i bought ebay brand since they were cheap and i wasnt sure if they would work... but they were perfect and once all connected they are pretty dame stiff. Kind of curious to see how name brand is compared to ebay. The other two bars are coresport or megan racing and they feel just as stiff once installed.


http://i37.photobucket.com/albums/e74/vwright01/100_1753.jpg
http://i37.photobucket.com/albums/e74/vwright01/100_1754.jpg
the one across the top is unscrewed about an inch and a half and the two that make the x are just about as short as they can get.. also for the seat belt bolts to sit proper the cpillar bar has to be dremaled out just a lil bit.
http://i37.photobucket.com/albums/e74/vwright01/100_1757.jpghttp://i37.photobucket.com/albums/e74/vwright01/100_1755.jpg

[1fasthb]

3 dc5 cpillar bars works just fine.. i bought ebay brand since they were cheap and i wasnt sure if they would work... but they were perfect and once all connected they are pretty dame stiff. Kind of curious to see how name brand is compared to ebay. The other two bars are coresport or megan racing and they feel just as stiff once installed.


http://i37.photobucket.com/albums/e74/vwright01/100_1753.jpg
http://i37.photobucket.com/albums/e74/vwright01/100_1754.jpg
the one across the top is unscrewed about an inch and a half and the two that make the x are just about as short as they can get.. also for the seat belt bolts to sit proper the cpillar bar has to be dremaled out just a lil bit.
http://i37.photobucket.com/albums/e74/vwright01/100_1757.jpghttp://i37.photobucket.com/albums/e74/vwright01/100_1755.jpg

can u post a link to the bars u got on e-bay? im lookin to try this out

[urthworm]

I just put in dc5 cpillar bars....i havent ever posted a link so lets see if this works. Also when i tried to buy 3 at once it didnt let me so i had to email the seller to do it, you may or may not have the same problem. http://cgi.ebay.com/ebaymotors/CIVIC-INTEGRA-RSX-EF-DA6-DC5-ECLIPSE-C-PILLAR-BAR-CROSS-_W0QQcmdZViewItemQQhashZitem2c581b567bQQitemZ19045 6747643QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

[1fasthb]

I just put in dc5 cpillar bars....i havent ever posted a link so lets see if this works. Also when i tried to buy 3 at once it didnt let me so i had to email the seller to do it, you may or may not have the same problem. http://cgi.ebay.com/ebaymotors/CIVIC-INTEGRA-RSX-EF-DA6-DC5-ECLIPSE-C-PILLAR-BAR-CROSS-_W0QQcmdZViewItemQQhashZitem2c581b567bQQitemZ19045 6747643QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

ok thanks man

[chrispychicken]

Wow im surprised someone is doing my setup! I sold this a long time ago. I think around the end of 08 to EP_Jon. Really stiff setup with the Cusco B-Pillar bars

[chrispychicken]

I really miss this setup! Tri-Brace w/cusco b-pillar bars. got a lot of compliments from a lot of peeps. I think i was the first to do this setup. I could be wrong.
http://img.photobucket.com/albums/v211/EP3SINY/chrispics006-1.jpg

[rd02SiR]

I really don't think this will do much for the car. If the bars were one whole peice and with out those pivot points, then maybe yes. and it would be better if the one accross was a harness bar.

[urthworm]

its hard to say if it helped because my car is already pretty stiff from all the other susp crap.. but my buddy took a ride with me and said it was noticeable more solid

[monjarassi]

Nice...

[MugenReplica]

I really miss this setup! Tri-Brace w/cusco b-pillar bars. got a lot of compliments from a lot of peeps. I think i was the first to do this setup. I could be wrong.

I think it was a toss up between you and Speedemon (spell check on that name). He put pics up around the same time you originally posted yours. He said he got the setup from a member on ClubRsx a few months prior to both of you posting pics up, so it sounds like you put the setup on independently of each other within a month or so of each other. Either way you were both from CA and we know all the import trends start on the West Coast.

[SandBagger]

bars are function good with plates welded to the chassis

[monjarassi]

Thought i'd share my setup..

http://farm6.static.flickr.com/5043/5207590582_2796a48002_z.jpg