.k24a2 swap DOs & DON'Ts

[revned3182]

K24a2 swaps ONLY.
ok guys, lets keep this one clean.
with your experiences on the BASIC K24A2 swap, please list your DO's & DON'Ts
please keep in mind that these are geared towards those enthusiast who are thinking of doing this swap like me and who are already in the process of doing this swap.
:msmile:

http://i74.photobucket.com/albums/i257/j03r85p/IMG_0041.jpg

[tsxdriver]

This thread pretty much says it all...

http://www.ephatch.com/forum/showthread.php?54859-K24A2-Swap-Comments

[RHDmeatwagon]

There is so much scattered info on this site. If you want to make Another thread on it you should just gather the info yourself so you dont have comments in between information from people.

There really isnt that much to it from what I've found.

Kpro
Em2 sway 15mm part I Think its the 01-02
RSX-s Race header & midpipe from 05-06
If using an RBC Adapter Pick up the Karcepts TB adaptor (two gaskets)
CRV pass side bracket.
OEM ep serpentine belt

Keep from A3
Wire Harness
TB (w/karcepts adapter)
Alternator
Starter
Tensioner
Crank Sensor
Thermostat
AC compressor
PS pump

Parts form a4
Water Pump
Oil Pump
Thermostat Housing
Fuel Rail etc.

Thats what I've got together

[nolimit59]

I had to use the black pipe coming from the thermostat off the k24a2 and buy a new hose for it to go to heater or whatever it is back there... :)

[shanewdude]

This thread pretty much says it all...

http://www.ephatch.com/forum/showthread.php?54859-K24A2-Swap-Comments

I agree... we can keep using that one! :mbiggrin: :closed_2: