View Full Version : Lean out at 2500 rpm??
mrpotatohead
10-05-2010, 07:50 PM
Hey guys, I'm having a slight issue with my tune. Everything is great except for a lean spot at 2500 rpm. It does it in all gears. I had my tuner road test it and he said he added fuel but it still does it. Anyone have a solution or areas of fucus??
Thanks
James
talonXracer
10-05-2010, 08:10 PM
We need info about your setup.
mrpotatohead
10-05-2010, 08:23 PM
Ah sorry lol.
RBC Intake manifold
rc750cc injectors
k20 top end
k24 bottom end
arp head studs
wiseco pistons
blueprint rods
full race manifold
precision 50mm wg
garett gt35r
wahlbro 255
fuel regulator, return and feed lines upgraded
kpro
eagle fuel rail
If there's something you guys need to know that i'm not listing please let me know and i will post it up right away.
Thanks again
mrpotatohead
10-05-2010, 08:51 PM
I should also add that it happens under any load weather wot or patially opened throttle.
mrpotatohead
10-06-2010, 07:35 AM
bump, anything??
mrpotatohead
10-06-2010, 05:16 PM
Bump
mrpotatohead
10-07-2010, 06:22 PM
Nothing?
mrpotatohead
10-10-2010, 06:33 PM
buuuump
AUTiger
10-13-2010, 07:10 PM
try posting a datalog and your calibration, send it to known good e-tuners for a diagnostic look. I suggest Mike @ elitetuning.net , evans e-tuning, rulo @ etunez.com, or even post it on the hondata forum and see if one of those guys can figure it out.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.