PDA

View Full Version : 04 EP3 Hub Bore?



NickL
10-21-2010, 06:55 AM
I know theres a thread right below for an 03, but I didnt know if the hub bore changed from 02/03-04/05.

I ordered a set of wheels and need to know what size hubcentric rings to buy for my 04 EP. Thank you.

theyb
10-21-2010, 07:13 AM
Are the wheels new? If it is , then it should come with the hubcentric rings.

usedep3
10-21-2010, 07:32 AM
the 04/05 hub dia is 64.1mm. you'll need to figure out what the hub diameter of your wheel is to get the proper hubcentric ring. u can usually figure it out based on the wheel manufacturer

samaj
02-15-2011, 03:59 AM
What is the Hub bore on the 2003 models? Sorry new mwmber here.
Thanks

HondaFreak
02-15-2011, 10:10 AM
You don't really need to run them. Most manufacture the rims to run without them.

Christian

RHCP0801
02-15-2011, 07:00 PM
What is the Hub bore on the 2003 models? Sorry new mwmber here.
Thanks

56.1mm


You don't really need to run them. Most manufacture the rims to run without them.

Christian

he is probably buying aftermarket rims and most aftermarket rims run larger than 64.1

samaj
02-16-2011, 10:27 AM
Mine is a UK built (but sold in Dubai) Type-R 2003 Left Hand drive with 5 lugs.
Would the Hub bore still be 56.1?

Thanks

RHCP0801
02-16-2011, 10:50 AM
i believe yours is 64.1 since its 5 lug but either wait for someone else to answer or just go and measure it which is easy to do

samaj
03-10-2011, 04:56 AM
Measured on my 2003 Left hand drive (UK built) & its 63.5

JaydmEp3
08-28-2011, 10:32 PM
the 04/05 hub dia is 64.1mm. you'll need to figure out what the hub diameter of your wheel is to get the proper hubcentric ring. u can usually figure it out based on the wheel manufacturer

good to kno cuz i need to buy some for my wheels...helped also..thanks usedep3.