PDA

View Full Version : Finished! a2/a3 jrsc + cams :) yeee



jrsc408
11-03-2010, 07:29 PM
Hey everyone!

Finished dd project

04' a2 head -
Supertech spring and retainers,
Sk2 stage 2 turbo cams

02' a3 block stock

Jrsc 5 lbs,
Rc 440,
Hybrid racing tensioner,
I/h/e/kpro
2.25 into 3"
A2 oil pump

Tuned with Dave at dnr, made 231hp/150tq :)

Lmk what you guys think, debating for near future 10lbs pully,and new map.

that's all for now folks!

2004ep3hatch
11-03-2010, 08:57 PM
very nice, Do you have a dyno sheet?

BlownSi05
11-04-2010, 05:30 AM
231whp on 5 LBS?! NICE!:mtongue:

I would say that before you go with the smaller pulley you are probably going to need bigger injectors. If you are using the RSX type JRSC you can get away with 550cc, but if it is the EP JRSC, then you will have to go up to 650cc. The 550s will not work on the EP JRSC manifold. Keep us informed with the progress!

And post a dyno sheet!!!1!:mbiggrin:

SandBagger
11-04-2010, 10:03 AM
BlownSi05 is right. you need bigger injectors. Also with the A3 bottom end - make sure you keep good oil in it and don't beat the hell out of it for 20-30 min straight...it doesn't have oil squirters and you do not have a built bottom end

heyvortek
11-04-2010, 10:35 AM
thats actually pretty good with an a3 bottom and a2 head. good job. lets see the dyno sheet and some pics :)

dkid15
11-04-2010, 06:30 PM
nice numbers bro especially for 5 lbs.

04EP3Hatch
11-04-2010, 09:25 PM
those are nice numbers for 5psi man, i made 241. on 7.5psi on my A3, good recommendation for upping the boost, swap out the turbo cams to an all motor grind like S2 stage 1's. the turbo cams have a bad overlap for supercharged setups, they try to aid in spooling what cant be spooled. i beleive a itr intake cam and a 06-07 k24a2 exhaust cam would be the cat's meow for a close to 300whp recipe!

superchargedk20
11-04-2010, 10:52 PM
shouldnt the tq be higher even at 5 psi? just wondering

dkid15
11-05-2010, 06:20 AM
I think it would be very tough to hit 300whp on an a3 bottom end. Try the kelford 1 cam. Its cheap and has been proven

02CivicSI-VTEC
11-06-2010, 12:30 AM
hey are you the one with the white ep3 with black wheels with polish lip right?


Hey everyone!

Finished dd project

04' a2 head -
Supertech spring and retainers,
Sk2 stage 2 turbo cams

02' a3 block stock

Jrsc 5 lbs,
Rc 440,
Hybrid racing tensioner,
I/h/e/kpro
2.25 into 3"
A2 oil pump

Tuned with Dave at dnr, made 231hp/150tq :)

Lmk what you guys think, debating for near future 10lbs pully,and new map.

that's all for now folks!

SandBagger
11-06-2010, 07:02 AM
I know dynos are different. My A3 made 132whp with I/H/E and stock ECU

uneekazn1
11-08-2010, 06:04 PM
just wondering are using the 5spd or 6spd tranny? please post some videos.