help IDK WATS THE PROBLEM!!

[ep3 BOY604]

ok idk if this is were i post my questions but seems like the place..im kinda a noob on ephatch!
I HAVE A 2005 EP3
ok long story short this one b**** reversed hitting the front left rim of my car....
there was no physical damage dne to the body...and everything seemed to look fine...so she quickly took off but after driving the car my steering wheel was out of alignment and i figured out tat THE LEFT FRONT RIM WAS CASTERED IN...I TOOK A LOOK AT IT TODAY AND I CNT FIGURE OUT WAT IT IS...i suspect its the lower control arms thats BENT BUT ANY INSITE>??

I REALLY APPRECIATE IT!!

[talonXracer]

The knuckles bend very easy as well.

[Civic5lug]

:yeahthat:

[Drew1d]

Castor? Are you sure you don't mean camber? Two bolts that hold the strut to the knuckle is what's adjusted for camber. If she hit it, perhaps the bolts shifted, in which case, you should re-align it. If it is Castor, ... something is bent.

[ep3 BOY604]

yea ok i mite have to check again but its not cambered the front of the rim goes in towards inside while the other rim is straight foward....but i see that its bent in but idk wat part...im goin with the other guys and ganna say its the knuckle but fuk tas ganna be a bitch if i have to replace it...

[ep3 BOY604]

o anohter thing were can u even get the steering knuckle instead off another car....and its quite difficult to find eps laying arond and r 5 lugs

[Twisted-X]

If one wheel points straight but the other points in a different direction, its a problem with the "toe". It could be a damaged tie rod or tie rod end, control arm, or knuckle like others have said.
You won't really know 'til you tear into it.

[ep3 BOY604]

k thnks for ya help

[Kentoneseboi]

i got into an accident awhile ago and hydro planed into a curb had super positive camber and then i checked out my front LCA and it had bent on one side and the other side it snapped...scaryy...get that checkout asap