View Full Version : How much do oem top hats cost?
Garrett
11-27-2010, 10:27 PM
Either privately or from the dealership? thankss
charles
11-28-2010, 01:24 AM
about $25 online
http://www.hondapartscheap.com/southbay/jsp/prddisplay.jsp?hidSwitch=Switch&hidIrno=|011&catcgry1=CIVIC&catcgry2=2002&catcgry3=3DR+SI+SIDE+SRS&catcgry4=KA5MT&catcgry5=FRONT+SHOCK+ABSORBER&vinsrch=no&ListAll=&prdrefno=&act=&count=0&quantity=0
Twisted-X
11-28-2010, 02:38 AM
Each. Plus shipping, $11. :mwink:
Garrett
11-28-2010, 06:12 AM
do i need all of those rubber pieces? liike 2,7,9
Garrett
11-28-2010, 09:15 PM
bump need to know if i need to order all of those
Twisted-X
11-28-2010, 09:30 PM
I would say 2, 7, and 9. I've done springs on two cars now, and on each one the upper and lower (rubber) spring seats looked pretty rough. I've heard on the EP3 the upper bearing (9) is made out of plastic and wears out pretty easily also. Anyone care to throw out a more informed opinion?
slate13530
11-29-2010, 07:35 PM
I would say 2, 7, and 9. I've done springs on two cars now, and on each one the upper and lower (rubber) spring seats looked pretty rough. I've heard on the EP3 the upper bearing (9) is made out of plastic and wears out pretty easily also. Anyone care to throw out a more informed opinion?
Yes, you are correct those bearings wear out pretty quickly.
pitoco
12-16-2010, 08:11 AM
Do they make some noise when they wear out? Because my ep3 make a noise like its something loosse.and i replace my 2 front struts and i check everthing and look fine ...any advise??thanks..
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.