thinking about doing a frank

[amnbassist]

can anyone point me in the right direction of what i'll need?

[Passenger]

CRV mount, em2 sway bar

[RedSiBaron]

im under the impression you would also need kpro :mwink:

[dkid15]

I've had mine in for about 7 months now. Runs very strong. Remember the header needs to be extended or the exhaust can be bent but will rub occasionally if you don't have motor mounts. Get motor mounts while doing the swap. I waited until after and i never got a chance to put them in, now the esmm's have gone soft and theres more motor vibration than ever. I would highly recommend doing a rebuild like i did while your piecing everything together. If you have any questions feel free to PM me.

[SandBagger]

I would just buy a K24a1 or K24a2 longblock. Then part out the K20a3

[zdiddy22]

i would definently buy a A2 unless you intend to boost. in that case get a A1. Then source a K20A2 head and RBC mani. Dont forget the crv mount and DCRH if your on a budget. check out the swap section. lots of good info. good luck.