EMUSA Downpipe

[civictype_r04]

Will this work with the revhard kit I have???? It is a full downpipe to the catback!!! Let me know what you guy all think!!!

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&_rdc=1&item=110627153791&ru=http%3A%2F%2Fshop.ebay.com%3A80%2F%3F_from%3DR4 0%26_trksid%3Dp5197.m570.l1313%26_nkw%3D1106271537 91%26_sacat%3DSee-All-Categories%26_fvi%3D1&viewitem=

http://i10.ebayimg.com/04/i/001/35/57/2a55_12.JPG

[Bishops223]

i might pick up one of these to if it works im lookin to upgrade to a full 3" also

[civictype_r04]

The little pipe is only 2.5 inch but the test pipe the longer one is 3 inch....

[Bishops223]

yea i kno but do u think with that and a custom 3" midpipe we will see any gains?

[civictype_r04]

yea i kno but do u think with that and a custom 3" midpipe we will see any gains?

I hope i got the skunk2 70mm catback....

[Bishops223]

nice and yea i have the skunk2 megapower muffler so ill just need to get a custom 3" midpipe

[civictype_r04]

Nice!!!

[japarossa]

I have this same Downpipe it came in my EMUSA KIT. This pipe is not a direct bolt up to Ep3 cat back exhaust, it will fit but you will need to have the little bend at the end cut off as the Ep cat backs bolt up almost straight. You will also have to have a 3 bolt flange welded on the end you cut off because this one is 2 bolt and ep3 cat backs are 3 bolt. Other than that fitment is good. I EMUSA makes this pipe to fit their 3" cat. back exhaust for the RSX.

[civictype_r04]

I have this same Downpipe it came in my EMUSA KIT. This pipe is not a direct bolt up to Ep3 cat back exhaust, it will fit but you will need to have the little bend at the end cut off as the Ep cat backs bolt up almost straight. You will also have to have a 3 bolt flange welded on the end you cut off because this one is 2 bolt and ep3 cat backs are 3 bolt. Other than that fitment is good. I EMUSA makes this pipe to fit their 3" cat. back exhaust for the RSX.

Yea thats the only thing that looked like it had to be changed to me.... Do you happen to have any pics of it on or off the car????

[gtimportfanatic]

i didnt take any pics.. but it was way off when i did mine.. make sure u do it at a shop... i think the position is the same as the rev hard.. instead.. im gonna try this

http://cgi.ebay.com/ebaymotors/3-0-RACE-SPEC-TURBO-DOWNPIPE-02-08-ACURA-RSX-K20-T3-T4-_W0QQcmdZViewItemQQfitsZModelQ3aRSXQQhashZitem3a61 9887f6QQitemZ250745489398QQptZMotorsQ5fCarQ5fTruck Q5fPartsQ5fAccessories

[civictype_r04]

i didnt take any pics.. but it was way off when i did mine.. make sure u do it at a shop... i think the position is the same as the rev hard.. instead.. im gonna try this

http://cgi.ebay.com/ebaymotors/3-0-RACE-SPEC-TURBO-DOWNPIPE-02-08-ACURA-RSX-K20-T3-T4-_W0QQcmdZViewItemQQfitsZModelQ3aRSXQQhashZitem3a61 9887f6QQitemZ250745489398QQptZMotorsQ5fCarQ5fTruck Q5fPartsQ5fAccessories

The 5 bolt flange doesn't look right....... and is this for a top mount????

[gtimportfanatic]

wat looks wrong about it? and yeah the distance looks like a top mount

[civictype_r04]

It just doesn't look like the normal 5 bolt flange.

[playap07]

why not go with the skunk2 mega power rr for the rsx-s (76mm) its a pretty good sounding exhaust and the flow is sick. the only thing you will have to do is take it to an exhaust shop n get the pipe chopped a lil just to fit. nothing more nothing less....just my 2 cents on the exhaust part

[civictype_r04]

wat looks wrong about it? and yeah the distance looks like a top mount

I know what it is its upside down!!!!! I think you have to cut off turn it upside down and reweld it!!!!

[civictype_r04]

wat looks wrong about it? and yeah the distance looks like a top mount

Yo I just got this off of the listing........ Fitment: 2002-2008 Acura RSX K20 Engine (Bolt On with T3/T4 Bottom mount manifold)

[japarossa]

This pipe is for a top mount turbo. The 5 bolt flange will not bolt up to a Garrett 5 bolt turbo outlet, it is made to bolt up to the EMUSA turbo in the ep3 kit. I tried to swap out the EMUSA turbo for my Turbonetics super 60 and the bolt holes don't even come close to lining up. I think only 2 of the holes lined up. I will try to get some pics today.

[civictype_r04]

This pipe is for a top mount turbo. The 5 bolt flange will not bolt up to a Garrett 5 bolt turbo outlet, it is made to bolt up to the EMUSA turbo in the ep3 kit. I tried to swap out the EMUSA turbo for my Turbonetics super 60 and the bolt holes don't even come close to lining up. I think only 2 of the holes lined up. I will try to get some pics today.

We were talking about this one now........... http://cgi.ebay.com/ebaymotors/3-0-RACE-SPEC-TURBO-DOWNPIPE-02-08-ACURA-RSX-K20-T3-T4-_W0QQcmdZViewItemQQfitsZModelQ3aRSXQQhashZitem3a61 9887f6QQitemZ250745489398QQptZMotorsQ5fCarQ5fTruck Q5fPartsQ5fAccessories


http://i.ebayimg.com/11/!B9)v5pw!mk~$(KGrHqR,!lEEy+jCyN+(BM6vrcYi0!~~0_12. JPG

Same as this but looks like he turned the flange the other way.........

http://farm5.static.flickr.com/4144/5069474321_8e2c4b555b_z.jpg

[japarossa]

That does look like the same flange as the emusa one.

[civictype_r04]

It is but it's on upside down on this one and emusa one it's on the right way.

[AKEP]

anyone knows if this fits with the reversed flange? i might try it..