PDA

View Full Version : Front Sway Bar Question



Polish Thug
12-30-2010, 04:24 PM
So today installed a DC Race header from a 05 type s along with the stock type s mid pipe all connected to the stock ep3 axleback. I had to leave the front sway bar off since the race header will not clear it. So what are my options for the front sway bar? I have read that the front sway bar from a 01-05 civic will fit, but are there any other choices? And where is the best place to purchase the em2 front sway bar or any other front sway bar that will fit?

Thanks,
Luke

urthworm
12-30-2010, 11:52 PM
Cusco will fit if your looking for aftermarket.

makavelibranded
12-30-2010, 11:59 PM
most people get that front sway off some junker in a salvage yard, I found one at my local yard (never used it) and paid $15, cause I pulled it off the car myself.

talonXracer
12-31-2010, 06:49 AM
There should have been ZERO clearance issues with a DC rh and the stock front sway There is no difference between the DC5S and EP3 spec DC rh. A incorrectly lowered chassis could also cause the clearance issue.

If it is hitting, a set of aftermarket endlinks will reposition where the hump of the sway is located. the 03' EX sway will work nicely as well.

civictype_r04
12-31-2010, 10:37 AM
Just get a em2 sway bar or new endlinks to adjust the stock on like talon said!

Polish Thug
12-31-2010, 11:38 AM
Looks like I will be getting a set of after market endlinks, any brand that I should look at?

civictype_r04
12-31-2010, 01:01 PM
The corsportusa ones I heard are pretty good!