anyone feeling nice?

[Jrw]

i have a k20/k24 440cc inject stock map cia skunk2 catback exhaust i keep getting an error code saying cylinder 4 missfire im running the k20a2 map with cia i edit the inj to 440 and changed fan to auto kick on at 180f. also my stock gauge isnt reading temp. Would anyone like to be nice and help me with a little tunning and help with my problem thanks also running stock k24 oil pump and the a3 tranny. thanks for the help/comments.

[McTaggart34]

I would help you if i knew anything ... sorry

[Jrw]

haha thanks man

[Canuck Civic]

Post up the kal that you actually are using.

[AUTiger]

you are also going to need to add 15-20% fuel if you are just running a k20a2 map. No need to have the fan kick on at 180, bump that thing up to 192-195F. Generally speaking, WOT runs shouldn't even start til the motor reaches 170*.

[HondaFreak]

That misfire could be a clogged injector. I got that a lot running 550cc rc's. Since I changed to 750's I have had less of an issue. If you had a jrsc, I'd say check the serp belt. you could move the injectors around and see if the code changes cylinders.

Christian