USDM hatch glass vs. Ep3 R hatch glass.

[MugenReplica]

Is anybody but myself curious over the Euro and JDM CTR hatch glass versus our USDM hatch glass? Isn't anybody else curious about why they are different and what they would look like next to one another?

[Windchaser]

Is anybody but myself curious over the Euro and JDM CTR hatch glass versus our USDM hatch glass? Isn't anybody else curious about why they are different and what they would look like next to one another?

I had a picture of them side by side a few years ago, but the site crashed and all of the pictures disappeared. What I can remember: the JDM glass was more round and tinted darker than my stock tinted glass. The locking mechanism was different near the handle; I'm not sure if that had to do with the fact that it was 04 CTR hatch door versus my 02 stock hatch door, but you need to swap out the locks anyways. Also, the USDM glass was mounted higher than the JDM glass. Finally, there were 1 or 2 extra hole/indentation that appeared to be for clips to mount harnesses, possibly for the CTR wing brake light?

[iQ...]

Here is a picture of a CTR rear hatch with glass

http://img155.imageshack.us/img155/2383/1453690775.jpg

[ep3jd]

^^^ nice to have you on the site :mwink:

[Twisted-X]

Sweet. It looks like the glass is actually cut out for the wing mounting points.

[ep3jd]

Yup and even some replicas include those areas and the notches to mount in and they require trimming and what not to fit.

[shanewdude]

Ours has the notches in the glass, too, but only along the top, not the sides, iirc:
http://i258.photobucket.com/albums/hh280/shanewdude/update1_18.jpg

One difference, aside from any in shape, is that the USDM has less of the black around the glass so the high-mount rear brake light is visible (it's inside the hatch because of the stupid looking factory spoiler).

[iQ...]

Here is a picture of the EP1/2/4 european hatch with small spoiler. Seems to be the same as on the US EP3.

http://img253.imageshack.us/img253/2374/1457142689.jpg

There was an option to buy at honda a Type R look spoiler that fitted the EP1/2/4 hatch without modifying it, should be also P&P to the US hatch. The problem now is to find that spoiler, it is probably discontinued... And if I remeber correctly the price was about 600 euros ( plus minus 800$).

EDIT:

Here is a picture oh the accesory Type R wing for the non Type R hatch. Also, the part number for this is 08F02-S5S-610 and the price is around 500$ for a primed wing. Thank me later :mbiggrin:

http://img840.imageshack.us/img840/3964/ep2r.jpg

[vicx52o]

Here is a picture of the EP1/2/4 european hatch with small spoiler. Seems to be the same as on the US EP3.


There was an option to buy at honda a Type R look spoiler that fitted the EP1/2/4 hatch without modifying it, should be also P&P to the US hatch. The problem now is to find that spoiler, it is probably discontinued... And if I remeber correctly the price was about 600 euros ( plus minus 800$).

EDIT:

Here is a picture oh the accesory Type R wing for the non Type R hatch. Also, the part number for this is 08F02-S5S-610 and the price is around 500$ for a primed wing. Thank me later :mbiggrin:

Look's like you're talking about the USDM HFP wing that 75% of us use.

[Type_R_Nammer]

So if I were to buy a replica Mugen wing from overseas the mounting points on the outside have to be shaved off a bit right?

[Passenger]

So if I were to buy a replica Mugen wing from overseas the mounting points on the outside have to be shaved off a bit right?

Yeah since its not USDM.

[mr-alternative]

price for that type-r look wing is 300 Euro, Honda wants to sell the last warehouse pieces and dropped the price.

[Kerby]

they drop the price on the 30th Anniversary carpets too?

[Johnny]

So the JDM glass is actually the same as the USDM except for the cut outs? Or am I missing something. I see no other difference.

[Kerby]

correct. cutouts.

[mr-alternative]

@ Kerby just the spoiler because thats Access Stuff...parts dont get cheaper, just more expenisve within the time.

[Ep3crazy]

Do they weight any less

[thaseint]

So the JDM glass is actually the same as the USDM except for the cut outs? Or am I missing something. I see no other difference.

Also the JDM (UKDM 30AE and Premiere edition) glass is factory tinted. I believe it's around 20% or so.

http://i885.photobucket.com/albums/ac53/SiR-CUE/Q%20Kanda%20Meet/QKND-21.jpg

Also the rear defroster lines are dark so they don't really show up on the glass like the orange lines on the USDM, UKDM and EDM. So far the only pics that have been posted are of the non-tinted glass.

Same goes for the back windows.

So in sum there are 3 variations of the rear glass:

1) JDM, 30AE and Premiere edition, tinted version
2) UKDM, EDM non-tinted version
3) USDM Si version with the differently cut glass.

[Siborg]

Woo Hoo My CTR non-privacy hatch glass arrived from Japan, pickin it up Saturday!!


http://i302.photobucket.com/albums/nn116/siborg-ep/fdf58aea.jpg

[usedep3]

Woo Hoo My CTR non-privacy hatch glass arrived from Japan, pickin it up Saturday!!


[IMG]http://i302.photobucket.com/albums/nn116/siborg-ep/fdf58aea.jpg[IMG]

you sir, are crazy and i love it

[krod]

My buddy club wing had to have the extra tabs shaved off the bottom then we had to fill the holes with fiberglass to make it look right.

[emsep]

do people buy real type r spoiler? i have a chance to pick one up for cheap, but dont know if any one would be interested. theres some scuffs but nothing a new paint job wouldnt cure.

[hothatch]

are you serious there is a difference?

[stephenmcc]

Only Difference Are The Side Cutouts As The EDM/UKDM/JDM Type R Wing Has 2 Extra Mounting Holes, No Other Differences At All Bar The Obvious Privacy Versions.