View Full Version : Cheaper JRSC-R

02-20-2011, 08:46 PM
Alright guys already have k-pro and going to be ordering my jrsc-r soon. Was looking at the prices and saw that you can get the kit without injectors and the map relocation for 600 bucks less. If you buy the map relocation by itself it's $130....soooo.

My question is, can I get some 440cc injectors with clips for less than 500 bucks and save a bit of cash? Don't really know much when it comes to injectors. Can I get some used injectors that are bigger than 440cc and just tell kpro their size and it will compensate?

I will be getting it tuned, just want to know if I have to stick with 440cc, or if I find some used ones that are bigger if that would be fine also.

Also, any brands I should be looking at? Best and/or cheapest?

Am I missing something?

If you buy injectors by themselves from JR they charge you an amazing $854, and looking at prices of injectors online they're like 200 bucks for all 4...not sure if I have this all down though.

Thanks for the help!

02-20-2011, 09:10 PM
You can also try looking at used blowers to save some coin, most used units will come with injectors and what not. Most people go out right with 650's for future modding of the jrsc. The question on the injectors would come down to what gains you wish to aim for. Another words, whats your goals? If you just want what the Race kit gives, stick with 440's. If you wish to push higher, look at 650's. You got RC, Injector Dynamics, Precision's, and Hondata sponsored http://www.deatschwerks.com/civic-k20/k24

Over on ClubRSX.com You can pick up 4x 650 Precision injectors for $70 a peice.... so $280 shipped, cant go wrong there.

02-20-2011, 09:34 PM
I'm going to put the jrsc on with a 3.8 pulley and 2.5 idler, I have s2 stage 1 cams atm, and i/h/e of course, will probably step up to meth injection at some point. Was thinking about doing a vtec killer setup also, not sure. So yeah, I guess I'll go with 650s. Now my other question would be, What kind of clips do I need, does it matter? Total noob when it comes to injectors, haven't really thought about them until now, was just going to use the whole jrsc kit. Thanks for the help

02-20-2011, 09:40 PM
I believe you can either get pig tails which will need to be wired into the factory harness, or most aftermarket companies offer plug and play wires aswell.

Check these...

Injectors http://www.clubrsx.com/cr/PTE-041-0651.html

Clips (curretly out of stock) http://www.clubrsx.com/cr/PTE-044-1005.html

02-20-2011, 09:43 PM
Awesome man, appreciate it. Thanks for the help.

02-20-2011, 09:48 PM
Awesome man, appreciate it. Thanks for the help.

BTW, get my PM?

02-20-2011, 09:53 PM
well now that you said something, yes, yes I did =P