PDA

View Full Version : Quick help needed - Rims and Tire fitment


SmoothEPs
02-28-2011, 07:59 PM
Looking at a set of Enkei 17x8 +48 on 215/50/17. I have an 05 with -1 camber all around with half a finger gap.... will I clear without any fender rolling?

Thanks!
ep3jd
02-28-2011, 08:02 PM
Why are you choosing a tir size larger then stock? 215/45 max

Sent from my Galaxy S using Tapatalk
ep3jd
02-28-2011, 08:03 PM
Wait.. What is your current suspension set up and tire size?

Sent from my Galaxy S using Tapatalk
SmoothEPs
02-28-2011, 08:03 PM
I am buying a used set. Its only slightly bigger, which is not a big concern (I believe).
ep3jd
02-28-2011, 08:04 PM
You should change tire size whenever you can afford it.

Sent from my Galaxy S using Tapatalk
SmoothEPs
02-28-2011, 08:06 PM
Running raceland coilovers, half finger gap all around with -1 camber.
SmoothEPs
02-28-2011, 08:08 PM
What tire size, offset, rim size is the minimum/maximum that I can run? Sorry if I am looking for a thoughtful response but I am looking at what my options are.

Again, half finger gap all around, -1 camber all around.

Thanks! Would like to not have to roll fenders nor install spacers.
ep3jd
02-28-2011, 08:12 PM
Its still too vague but since you're on coilovers you can fine tune it to your liking. Most people run 40 profile tires, 45 max

Sent from my Galaxy S using Tapatalk
SmoothEPs
02-28-2011, 08:25 PM
Hows this... 17x7.5 +38 on 215/45/17?

Thanks!
civictype_r04
02-28-2011, 09:22 PM
100% perfect

Sent from my Galaxy S using Tapatalk

Yup!