PDA

View Full Version : I need a help for my suspension setup !



akqowns
03-04-2011, 01:06 AM
205/50/17

17x7.5
+35 offset

if i drop 1.5 inches all around, would it rub?

if it would rub. what inch drop( I want at least 1.0~1.3) and what camber set would be the best for those wheels/tires without any problem?

i'm so noob on this.. :( i'm going to change my suspension setup next monday, and get alignment as well.. so i need these info ..

i would be grateful for any help !

PatrickJamesYu
03-04-2011, 08:58 AM
Do you want non stock camber settings?

Also, are you getting coilovers, or springs?
Coilovers will allow for you to fine tune your height

You will probably have to roll your fenders.
I recommend you do so, even if you don't mod anything, just for future possibilities.

akqowns
03-04-2011, 10:11 AM
i'm getting coilovers and

if I roll the fenders, it won't rub if i drop around 1.3inch ?

or should i go with non stock camber settings?


Do you want non stock camber settings?

Also, are you getting coilovers, or springs?
Coilovers will allow for you to fine tune your height

You will probably have to roll your fenders.
I recommend you do so, even if you don't mod anything, just for future possibilities.

PatrickJamesYu
03-04-2011, 08:41 PM
i'm getting coilovers and

if I roll the fenders, it won't rub if i drop around 1.3inch ?

or should i go with non stock camber settings?

I dont think you will in the rear with just daily/ casual driving
But as they compress they might rub in the rear.

If you don't need to/ want to, I would keep close to stock camber settings.
Just to save tires, and safety reasons.

But you can do whatever you want
If you're going to get full coilovers with the adjustable height, I'd just get all the stuff and work with it from there
When you have variable height abilities, you can work with what you have, and make things fit.

powdbyrice
03-04-2011, 09:59 PM
welcome!
http://www.ephatch.com/forum//showthread.php?53564-New-Wheel-Tire-Size-thread

akqowns
03-04-2011, 11:23 PM
I dont think you will in the rear with just daily/ casual driving
But as they compress they might rub in the rear.

If you don't need to/ want to, I would keep close to stock camber settings.
Just to save tires, and safety reasons.

But you can do whatever you want
If you're going to get full coilovers with the adjustable height, I'd just get all the stuff and work with it from there
When you have variable height abilities, you can work with what you have, and make things fit.

i appreciate your help !

i'm planning on to get another rims but, fornow i have no money to do ,

I got tein basic, eibach camber kits, progress sway bars, skunk2 contorl arms fornow, i might get new wheels/tires around june ,

how about just 1 inch drop fornow? still rubbing? i really don't like between fender/wheel gab looks like that's why i want to lower during change my coilovers

can't just wait for 3 months from now :(

abstract
03-05-2011, 02:27 AM
????? if u have coilovers just lower it and see if it rubs, stop obsessing.

Off topic, 205/50 isnt the greatest size for a 17x7.5 either

ep3jd
03-05-2011, 05:46 AM
Yeah I don't know why but this is the third thread recently where someone wants to run 50s on a 17 inch wheel.

_________________________________
POOPTOOTH loves Tapatalk :tehe:

shanewdude
03-05-2011, 06:08 AM
welcome!
http://www.ephatch.com/forum//showthread.php?53564-New-Wheel-Tire-Size-thread

Thanks for the link! Thread closed.