megan midpipe

[kale's blue ep3]

my megan midpipe hits off my heat shield so i took the heat shield off but it still hits. Is there anything i cant put there so it wont?

[kale's blue ep3]

my megan midpipe hits off my heat shield so i took the heat shield off but it still hits. Is there anything i cant put there so it wont?

anyone!?!?!

[EPSU3]

I took a pipe and bent the rear hangers a few degrees before I installed it because this is a common issue. Nearly one year and no banging.

[.colin]

its banging the floorpan of the car, not the heat shield. Either you can dimple the exhaust so it clears whatever its hitting or bend the hangers as EPSU3 said.

[kale's blue ep3]

I took a pipe and bent the rear hangers a few degrees before I installed it because this is a common issue. Nearly one year and no banging.

which hangers are you talking about?

[.colin]

which hangers are you talking about?

hangers at the axleback connection, angle them up so the exhaust sags.

[he_li48]

I installed urethane hangers in the rear and then I cut one of the stock hangers and wedged it between the midpipe and heat shield. Stopped all the banging. I hope the hanger does not melt on me. :)