PDA

View Full Version : KRRH/CRSX RH/BWRH With K24 swap



03Si757
03-16-2011, 04:42 PM
Now before I go on, I will note that this was done with then Em2 (skinny) front sway. I have a K24a1 swap and before was running a OBX v.3 RH, and it did not clear the front sway to save my life, Recently picked up the Kidd Racing/ClubRSX/BlackWorks Race Header, and IT CLEARS!!! (atleast the em2 sway) Here are pics, they speak for themselves.

With car in the air...
http://img33.imageshack.us/img33/6449/dscf2221r.jpg
http://img268.imageshack.us/img268/9429/dscf2223z.jpg

And with car on ground
http://img198.imageshack.us/img198/9121/dscf2230w.jpg

Now the only draw back iv see is that this thing makes your exhaust hang Lower then I would like. But ill find a way to fix that sooner or later, and another thing, my exhaust sticks out about an inch or more fromt he rear bumper... (See Pics)

http://img545.imageshack.us/img545/2642/dscf2233.jpg
http://img20.imageshack.us/img20/4143/dscf2234n.jpg

Now, as far as performance, I can already feel it, or maybe thats excitment that something went right for a change lol. But its chirping 3rd again, and thats with half a clutch disc hahaha. And no more swooshing noise I believe was caused from the flex pipe on the OBX v.3....

This Is paired up with K24a1, 05-06 RSX-S Midpipe, Megan Racing Axleback. Im happy now :tehe:

T_Virus
03-19-2011, 02:20 PM
nice and beefy

udontknowjack
03-19-2011, 09:21 PM
its gonna hit/rub for sure @ wot 1st/2nd....

03Si757
03-20-2011, 05:54 AM
its gonna hit/rub for sure @ wot 1st/2nd....

it doesnt do that at all, i have yet to hear or feal anything..

bchaney
03-23-2011, 07:24 AM
Stock motor mounts?

03Si757
03-30-2011, 08:31 PM
Stock motor mounts?

Innovative 60a's all 4..

ep-unit
03-31-2011, 12:01 AM
im still yet to install my em2 sway, im currently running without a front sway let us know if theres any issues

imthebro
04-25-2011, 10:38 AM
would you happen to have pictures of how the KRRH connects to your mid pipe ?

What kind of cutting was done to make it fit to the rest of the line (I heard you have to reduce the test pipe by a couple 2 or 3 ")

thanks

ep-unit
04-25-2011, 01:05 PM
would you happen to have pictures of how the KRRH connects to your mid pipe ?

What kind of cutting was done to make it fit to the rest of the line (I heard you have to reduce the test pipe by a couple 2 or 3 ")

thanks

i think thats only with running a ep3 specific mid pipe but if you are running the type-s mid pipe then all you need is the ep3 axle with the KRRH

Twisted-X
04-25-2011, 01:49 PM
Sweet, finally some pics of this combo!

K24+KRRH+EM2 Sway+solid mounts=Win