PDA

View Full Version : Help new exedy clutch slip



jarsir
03-23-2011, 03:56 AM
hi i have 04 si with k20a2 swap i put new exedy clutch slip do u guys know y??

jarsir
03-23-2011, 03:58 AM
befor i change the clutch is slip after i change same thing

talonXracer
03-23-2011, 05:20 AM
Did you properly re-surface the flywheel, and or apply the proper break in procedure? What Exedy clutch?

And it would greatly help if you utilize proper spelling and sentaence structure and not text talk.

jarsir
03-23-2011, 02:59 PM
i put new EXEDY OE CLUTCH PRO-KIT F1 RACING FLYWHEEL

Twisted-X
03-23-2011, 03:03 PM
So you're saying the clutch, pressure plate, and flywheel are all new?
Did you spray the flywheel with degreaser (brake clean) before installing the clutch?

jarsir
03-23-2011, 07:54 PM
yes i. Did should i change cmc?.

jgn6848
03-23-2011, 09:00 PM
you combined a good oem clutch (exedy) with a hit or miss flywheel (F1 racing).... not a good idea

Twisted-X
03-24-2011, 01:49 PM
Like Talon was alluding to, the clutch takes about 500 miles or so (depending on brand) of break-in before you're supposed to give it full throttle abuse. It has a far greater chance of slipping (and glazing) if you do so before the manufacturers recommended break-in procedure.

Edit:
From Exedy install instructions (http://www.exedyusa.com/multimedia/specsheets/trblshtng06.pdf)

#12. "Road test vehicle and never abuse a newly fitted clutch. Allow 750 mi break in and always adjust free travel on your new clutch at 750 mi and 1500
miles. Thereafter, adjust at every 10,000 miles."

jarsir
03-26-2011, 04:14 AM
but change it ready 3000mi still same thing
brfor i change the new clutch it was slip
after i change same thing should i change cmc